Hi #ocminer is this up and running yet? Where does the polo id go?

Hi Claymore, I changed from V7.1 to 7.2 and used the new low intensity dag creation and it works great. I can overclock my undervolted 390's a bit more and it starts up ok!

But I have the same problem now with the program hanging with the "miner thread hanged, restarting" dialog box that requires clicking to proceed.

Edit: It doesn't happen every time there is a problem and the miner restarts, sometimes it restarts OK. OS is Windows 10, Eth/SC

The dialog box says...

"EthDcrMiner64.exe has stopped working" A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.   > Close program <

The last few lines in the log file were...

17:08:19:259   bc4   recv: 51
17:08:19:259   bc4   srv pck: 50
17:08:19:290   bc4   srv bs: 0
17:08:19:290   bc4   sent: 208
17:08:19:446   c2c   got 36 bytes
17:08:19:446   c2c   buf: {"id":4,"result":true,"error":null}

17:08:19:446   c2c   parse packet: 35
17:08:19:446   c2c    SC: Share accepted (390 ms)!

17:08:19:446   c2c   new buf size: 0

Thanks for that, with -drci 40   ETH 32.2MH/s SIA 644MH/s per R9 390 gpu and $ return up 11% according to https://www.whattomine.com/merged_coins/2-eth-sc (if power consumption remains the same).

Cheers

When I switched from ETH/DRC to ETH/SIA my R9 390's started hitting their power limiter which was set to the stock value 0.

I removed the power limit by adding -powlim 50 to the config file and the hash rate went to 33MH/s ETH and 495MH/s SIA per card (-cclock 1155 -tt -100 -dcri 30)

Check that your power supplies are able to do a bit more, my rig increased it's power consumption by 7.2% with ETH/SIA.