Hello Jack, is it possible to send me the 0.8 version of bitcoin? i try to find executable for windows or a way to make it but nothing. can you please help me? thanks in advance |
|
|
|
|
You can add a seed node
seed-node=5.189.135.137:18875
Regards
|
|
|
|
hy all...
someone can help to open bitcoal wallet ?
i can't open they web
Here you can find what ever you need to open a wallet https://bitcointalk.org/index.php?topic=1635047.msg24919766#msg24919766Because this project has been abandoned (attempts to contact thread OP failed), we have decided to step in and maintain the project ourselves (members of community). The official website is now expired, so we have set up a replacement http://getbitcoal.orgAlso, we have worked on porting over the bytecoin gui wallet to use the forknote codebase with an embedded config and now have a working standalone BitCoal GUI Wallet for everyone: https://github.com/bitcoal/bitcoalwalletAvailable for Windows and Linux (tested). Easily mine bitcoal directly in the gui, explore blockchain, send receive, tx history etc. Still compatible with forknote, we have updated seed nodes on the official forknote configs repository https://github.com/forknote/configs/blob/master/bitcoal.confWe will see about making another thread or if a mod can update information in this ANN. |
|
|
|
|
Good Morning,
A good welcome to the new Dev.
I fix the pool and today i will permanently solve the problem.
Thanks people
|
|
|
|
|
As I saw payments are ok NOW
|
|
|
|
|
Hello ppl,
Yes I have a little prob,
today or the most tomorrow the payments will be fixed.
I am trying to fix it so i appreciate your patience
|
|
|
|
|
Good morning People,
I was out for some personal problems...
Also cryptonotepool.com has nicehash port. the port is 7776
Its nice to be back....
|
|
|
|
That makes sense, but seems not to be the only cause for the IP Ban. I just excluded the rig with the cpu and only ran the miner on the 6 rigs without any cpu and after a few seconds all the rigs started to exude the IP Ban.
Yes you have right I read all the posts in wolfs thread and i see that a lot of people have this issue in some pools. In some rx470 your config is working but they have a lot of rejected shares. So can you check if this config is working on rx470? { "index": 1, "threads": 1, "rawintensity": 960, "worksize": 8 } the sure thing is that rawintensity 1008 is working perfect. |
|
|
|
Hi again. My undervolt slight overclocks are stable on other coins and on democats pool using high custom diff and my 7 rigs all have banned IP at the same time. At the time Port 7776 with the minimum difficulty of 10.000 also resulted in the blocked IP messages which then resulted in so many rejected shares. It seems because I was using the 3337 port initially I was banned and within the 10 minutes I tried the 7776 port before the ban was lifted. So I just moved my rigs to cryptonotepool for about 5 minutes now straight to port 7776 to verify what happens and so far I got banned when I added more rigs to the pool, which is not happening on democats only when I use custom difficulties of 100.000+. I am going to mine Monroe a bit until profitability comes back though and later test the other bip pools as well. Also I am not using nicehash to mine, only gpu's. Configs of mixed cards using wolf's miner: RX470 4GB - 660H/s 1020/1860mhz 820mv {
"Algorithms":
[
{
"name": "CryptoNight",
"devices":
[
{
"index": 0,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 508,
"worksize": 4
},
{
"index": -1,
"threads": 2,
"rawintensity": 16,
"worksize": 8
}
],
"pools":
[
{
"url": "stratum+tcp://cryptonotepool.com:7776",
"user": "bip1hzvviozeNuj42Ntea5Du7652cjcF18rNnNXhQpcidH3rYMVk4zvXcgBijN582xEo3RhgXFhZw6P TP3PR6XyF7Egc6rzzZH",
"pass": "x"
}
]
}
]
}
R9 290 - 760H/s 1000/1250mhz -31mv "threads": 1,
"rawintensity": 992,
"worksize": 8 HD7970/7950 - 480H/s 900/1250mhz 850mv "threads": 1,
"rawintensity": 896,
"worksize": 8 I checked the log of my pool and I saw that your GPU is working well Perhaps the Cpu miner is the problem if you remove it all will be great I saw that a connection of your wallet was dropping to difficulty 5 so try it without including cpu miner. |
|
|
|
The best Condition was to reject BitPark and add BipCoin.... |
|
|
|
Thanks for clearing that up MWD64. I got my new "proper" address from the GUI Wallet and amended all my configs. "Lookup" on democats show my hash now, but most of my miners had this issue suddenly on both democats and cryptonotepool:
C:\guiminer-scrypt_win32_binaries_v0.04\cgminer\wolf-xmr-miner
.conf
[10:28:25] Setting up GPU(s).
[10:29:06] Successfully connected to pool's stratum.
[10:29:06] Share rejected (your IP is banned): -1/0 (inf%)
[10:29:06] Total Hashrate: nanH/s
or it starts but,
[10:28:48] Thread 1, GPU ID 1, GPU Type: Tahiti: 376.39H/s
[10:28:49] Share rejected (your IP is banned): 9/546 (1.65%)
[10:28:49] Total Hashrate: 823.61H/s
The solution was to Mine on democats and specifying difficulties in the 100 000's at the end of my wallet address for each rig, using the maximum difficulty of 10 000 (port:7776) on cryptonotepool also resulted in perma IP ban, something cryptonotepool might look into. This is with 7 Rigs doing 5 KH/s.
Have you made a lot of OC your cards? Can you share the conf file? The pool adjust the difficulty automatically. So please tell me which GPU cards you have and your conf file that you run Also the port 7776 is the minimum difficulty of 10.000. As I can see in this little log you have 537 rejected shares so of course the pool ban you. The ban is auto removed after 10 mins Please share the info that i asked. so i can help you to fix your configs |
|
|
|
It work I mine bipcoin for 5 minutes 🙂 On windows 10 / 64 but my cards stoped one by one and it say ,,sick,,
Have you over-tune your cards? |
|
|
|
Hi I need help. I have graphic cards AMD and I want to mine Bipcoin in one of this two pools http://bip.cryptonotepool.com/ or http://democats.org/ I use Claymore CryptoNote GPU Miner v9.6 Beta-Pool for both pools but its not working. When I make the settings in pool and in my wallet nothing happens. Is there anything special that I need to do ? Thank you in advanece. Unfortunately Claymore does not accept the wallet address that starts with bip so if you want you can mine with sgminer the one that it works perfect with me is this https://bitcointalk.org/index.php?topic=1612329.0 |
|
|
|
It's a plain JavaScrips, therefore already sourcecoded  $ curl http://xci.mypool.name/pages/network.html + a new var with pools list. I hold the list in config.js. Something like: var networkStat = {
"xci": [
["xci.mypool.name", "http://xci.mypool.name:42004"],
["democats.org", "http://pool3.democats.org:7713"],
["gorillapool.org", "http://gorillapool.org:8117"],
["xci.acidminer.org", "http://xci.acidminer.org:8117"],
["xci.cryptonotepool.com", "http://5.189.135.137:8119"],
["xci.ms-pool.net.ua", "http://xci.ms-pool.net.ua:8117"]
]
};or simply: curl http://xci.mypool.name/config.js
It's not perfect, but better than nothing. Fantastic Work, Thanks for sharing |
|
|
|
i mined on xci.cryptonotepool.com the last 10hours but still got 0 xci
or maybe i get some before last fork
but i see
Pending Balance: 0.00000000 XCI
Total Paid: 0.00000000 XCI
i notice got some into my wallet but don't know from wish pool it came
i guess i got my coins from this morning and lose them from last night from gorilla
so it must be ok just them after last fork not there yet , but i guess not yet confirmed
Dear Carlo I kept all the history so if someone that mined in my pool wants to see his earnings or the blocks before forked the site is this http://5.189.135.137/xci-oldor http://cryptonotepool.com/xci-oldAnd paste your address to see your status... |
|
|
|
|
Show Posts
