[ANN] Cannabis Industry Coin XCI anon blockchain for the legal marijuana.GUI UPD

[delle54]

Same here on http://xci.ms-pool.net.ua/# - Pending Balance: 27.02176557 XCI
But my Wallet showed + 27 XCI this morning!?

[cryptomaxsun]

Same here on http://xci.ms-pool.net.ua/# - Pending Balance: 27.02176557 XCI
But my Wallet showed + 27 XCI this morning!?

manually send. yours?

Code:

transfer 0 1CfN7CtWaGa7KMNvx2uxuEJeXHhRf2BaAbKuATaPByJZUKAtcmL6PtiiAvsmsqy3dQfoZ1PUdUmKV6nGodBeu7CDBB2eG8i 27
Money successfully sent, transaction f2be8ac7c71ad3d37133427ea03f581722b126c3db01c39766b30a50d99f1b0d

[delle54]

Yes, it's me. THX.

[carlo_0000]

ok thanks i got mine too

gorilla pool is not paying too all what i mined today is in pending

is still something wrong with network?

i also notice than pending balance is really to low
i mined last 9 hours at 14hs  with average 40-45 xci an hour  so it s more than 360xci i mined  but only have 155 in pending
i don't think there are 200+ xci in the last 60 blocks   difficulty was stable

or maybe it is  60 blocks is a lot

[XCICOIN]

Network is stable but pools may have issues after flushing and reset. I suggest to lower the min payout and max payout to 1XCI - 10XCI and to lower the payout time to 3-10min.

[Avast12]

This coin is better potcoin?

[XCICOIN]

This coin is better potcoin?

Make your own research, nobody will tell you for sure what is better for you.

[Sam123]

Is gorillapool is at the correct chain now?
Thanks,

[GorillaPool]

Is gorillapool is at the correct chain now?
Thanks,

Yes gorillapool.org is on the right chain, the same as other pools.

[GorillaPool]

This coin is better potcoin?

XCI is anonymous - stands for your Privacy, Pot is not.
XCI is miners friendly PoW, decentralized. Pot is PoS, Pot more centralized.
XCI is new and uses new CryptoNote tech, Pot is old and Scrypt.
Here are the main differences. For me XCI is much better than Pot, it may be very young now but with a great potential to grow!

[GorillaPool]

Network is stable but pools may have issues after flushing and reset. I suggest to lower the min payout and max payout to 1XCI - 10XCI and to lower the payout time to 3-10min.

Did it! Now payments are going smoothly.

[cryptomaxsun]

Dear miners!
Pool updated http://xci.ms-pool.net.ua
payments work http://xci.ms-pool.net.ua/#payments
For your comfort blockchain explorer http://xci.ms-pool.net.ua/#blockchain_blocks
network statistic http://xci.ms-pool.net.ua/#network
Happy mining!

[MainCoins]

Network is stable but pools may have issues after flushing and reset. I suggest to lower the min payout and max payout to 1XCI - 10XCI and to lower the payout time to 3-10min.

As per your suggestion I set min/max payouts and time.

There was an idea how to avoid "nicehash" attack till the software bug caused the chain split is found and fixed: setting difficulty limit or/and filtering. I would do it as well. But it's clear that it only works if all perform same actions.

[PikachuYou]

so the chain's fucked and yet it's still worth over 1000 satoshis....

 

[HelpTheDogs]

no it s not

as you can see gorilla pool is finding mostly all the blocks
so it s mean there is the most speed there   but it s only 12-15 kh/s, so what is doing the 500kh ? nothing they finding no block

Is gorilla pool the biggest? Where can I see a chart for the different pools? Id like to see who has the most hash currently and how far ahead they are from the 2nd place pool.

Mining pools list is on the first page here: https://bitcointalk.org/index.php?topic=1651012.msg16587701#msg16587701

   http://xci.cryptonotepool.com/
    http://gorillapool.org   
    http://democats.org/pool/?name=xcicoin
    http://xci.acidminer.org/
    https://xci.frewns.com/
    http://xci.ms-pool.net.ua/#
     http://xci.mypool.name


And here https://xcicoin.org

There are 2 major XCI mining pools:
gorillapool.org with Total Blocks Mined: 11501
xci.cryptonotepool.com with Total Blocks Mined: 9579
There are more than 36000 blocks so being the largest gorillapool is still has less than a 30%
 

Thanks for the info. Is there a site where I can compare them all or I must do it manually one at a time? Do you mine? If so what pool are you using mate?

[MainCoins]

Thanks for the info. Is there a site where I can compare them all or I must do it manually one at a time? Do you mine? If so what pool are you using mate?

all known pools are synced by now.
compare "manually" by doing something like that:

Code:

for i in http://xci.mypool.name:42004/stats http://pool3.democats.org:7713/stats http://xci.acidminer.org:8117/stats  http://xci.ms-pool.net.ua:8117/stats http://xci.cryptonotepool.com:8119/stats; do echo -n "$i: is at " && curl -s $i | jq .network.height; done

or in a way you like.

I coded a very simple "overview" page. So you can check some data at: http://xci.mypool.name/#network

"Height" is most important column for checking chain splits.

[GorillaPool]

I coded a very simple "overview" page. So you can check some data at: http://xci.mypool.name/#network

Source code link?

[MainCoins]

I coded a very simple "overview" page. So you can check some data at: http://xci.mypool.name/#network

Source code link?

It's a plain JavaScrips, therefore already sourcecoded 

Code:

$ curl http://xci.mypool.name/pages/network.html

+ a new var with pools list. I hold the list in config.js. Something like:

Code:

var networkStat = {
    "xci": [
        ["xci.mypool.name", "http://xci.mypool.name:42004"],
        ["democats.org", "http://pool3.democats.org:7713"],
        ["gorillapool.org", "http://gorillapool.org:8117"],
        ["xci.acidminer.org", "http://xci.acidminer.org:8117"],
        ["xci.cryptonotepool.com", "http://5.189.135.137:8119"],
        ["xci.ms-pool.net.ua", "http://xci.ms-pool.net.ua:8117"]
    ]
};

or simply:

Code:

curl http://xci.mypool.name/config.js

It's not perfect, but better than nothing.

[atithasos]

I coded a very simple "overview" page. So you can check some data at: http://xci.mypool.name/#network

Source code link?

It's a plain JavaScrips, therefore already sourcecoded 

Code:

$ curl http://xci.mypool.name/pages/network.html

+ a new var with pools list. I hold the list in config.js. Something like:

Code:

var networkStat = {
    "xci": [
        ["xci.mypool.name", "http://xci.mypool.name:42004"],
        ["democats.org", "http://pool3.democats.org:7713"],
        ["gorillapool.org", "http://gorillapool.org:8117"],
        ["xci.acidminer.org", "http://xci.acidminer.org:8117"],
        ["xci.cryptonotepool.com", "http://5.189.135.137:8119"],
        ["xci.ms-pool.net.ua", "http://xci.ms-pool.net.ua:8117"]
    ]
};

or simply:

Code:

curl http://xci.mypool.name/config.js

It's not perfect, but better than nothing.

Fantastic Work,
Thanks for sharing

[GorillaPool]

I coded a very simple "overview" page. So you can check some data at: http://xci.mypool.name/#network

Source code link?

It's a plain JavaScrips, therefore already sourcecoded 

Code:

$ curl http://xci.mypool.name/pages/network.html

+ a new var with pools list. I hold the list in config.js. Something like:

Code:

var networkStat = {
    "xci": [
        ["xci.mypool.name", "http://xci.mypool.name:42004"],
        ["democats.org", "http://pool3.democats.org:7713"],
        ["gorillapool.org", "http://gorillapool.org:8117"],
        ["xci.acidminer.org", "http://xci.acidminer.org:8117"],
        ["xci.cryptonotepool.com", "http://5.189.135.137:8119"],
        ["xci.ms-pool.net.ua", "http://xci.ms-pool.net.ua:8117"]
    ]
};

or simply:

Code:

curl http://xci.mypool.name/config.js

It's not perfect, but better than nothing.

Thanks for sharing, I mean to open source your pool source code with all additions on github for other pool admins.