 Show Posts
|
|
Pages: [1]
|
|
Can someone explain to me how the POS reward works for blocks, how do I know how many blocks I have to calculate if I have 200million
|
|
|
|
|
this pool has died, you collect their cadaver please
|
|
|
|
I am getting ~38 sol/s with (3) Sapphire Nitro RX480 4GB cards on Ubuntu 16 with the latest amd-pro driver.
The BIOSs are modded for 2000 memory clock and the timing straps from the 1625 clock speed.
Using good SSD and 8GB of quality RAM - Gigabyte AM1M-S2H with Athlon 5350 APU.
My issue is the program won't run for more than an hour before one of the cards dies or the program crashes.
zogminer has stayed-up just fine, but not the pre-built zcashgpuclient_silentarmy binary.
I like the speed, but, can't do the constant reboots.
Anyone with similar experience?
38sol in each instance or whit two instances 19+19? 38sol in total for card. |
|
|
|
Someone has a manual, a post, or can explain how to set these parameters. # -1 means don't change
corefreq = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
memfreq = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
powertune = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
fanspeed = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"]; Why? It is for future improvements? This is my current performance with 4 x RX470 8G stock bios [GPU 0] T=-1C A=-1% sols=19.554 [GPU 1] T=-1C A=-1% sols=19.623 [GPU 2] T=-1C A=-1% sols=19.564 [GPU 3] T=-1C A=-1% sols=19.439 [GPU 4] T=-1C A=-1% sols=19.557 [GPU 5] T=-1C A=-1% sols=19.619 [GPU 6] T=-1C A=-1% sols=19.560 [GPU 7] T=-1C A=-1% sols=19.437 The latest updates 0.2.3 and 0.2.4 are working fairly stable, and automated payments system, also with my own T, I have to thank for that. But I would like to increase the speed of the fans to my RX470 to improve cooling. hello. my r9 280x his gives the value of `25 sol. Your card is more powerful and faster. Solve the problem. or you'll be at a loss mining. It is really true? note that is 4 GPU with two processes, ie each GPU 38sol. Someone is monitoring consumption Wh RX470? |
|
|
|
Someone has a manual, a post, or can explain how to set these parameters. # -1 means don't change
corefreq = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
memfreq = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
powertune = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
fanspeed = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"]; Why? It is for future improvements? This is my current performance with 4 x RX470 8G stock bios [GPU 0] T=-1C A=-1% sols=19.554 [GPU 1] T=-1C A=-1% sols=19.623 [GPU 2] T=-1C A=-1% sols=19.564 [GPU 3] T=-1C A=-1% sols=19.439 [GPU 4] T=-1C A=-1% sols=19.557 [GPU 5] T=-1C A=-1% sols=19.619 [GPU 6] T=-1C A=-1% sols=19.560 [GPU 7] T=-1C A=-1% sols=19.437 The latest updates 0.2.3 and 0.2.4 are working fairly stable, and automated payments system, also with my own T, I have to thank for that. But I would like to increase the speed of the fans to my RX470 to improve cooling. |
|
|
|
Someone has a manual, a post, or can explain how to set these parameters. # -1 means don't change
corefreq = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
memfreq = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
powertune = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"];
fanspeed = ["-1", "-1", "-1", "-1", "-1", "-1", "-1", "-1"]; |
|
|
|
|
any block found in the last 4 hours ...heck that all is well in the pool.
|
|
|
|
 Anyone know why the gpu voltages are not in actual mV? Is it safe to just enter a value in mV? This is Mis rx 480 4gb btw, thanks! You can enter mV values but they will be ignored. GPU core voltage is calculated at runtime in relative steps to its base voltage. What you will need is an offset either hardcoded into the bios using a hex editor ( complicated ) or a tool like Strixx or Watttool ( simple ) to load the core voltage offset at system startup. I have just started using watttool to adjust voltages, in regards to the memory i should copy the timings from 1750 strap across to the 2000mhz strap and flash that? That is right. That is what most people do. But for the ZCash mining, it is better to use the stock bios. Can I overclock in Linux for best results, with stock bios? And if this is not possible, someone can tell me a link or post that explains how to do whit this custom bios from linux? Thanks |
|
|
|
|
Something is wrong with this pool of mining, I am not receiving adequate reward in relation to the numbers of block discovered by the pool . And the rewards are not commensurate with my power of mining and generated solutions. This smells rotten. SCAM
|
|
|
|
|
@eXtremal problems continue? no updates....no new blocks found in the pool
|
|
|
|
|
Message from server: Can't receive work from ZCash wallet
Any solution for this?
|
|
|
|
|
Anyone can explain to me, if I need OpenCL + drivers for my graphics card or just OpenCL, for a Shaphire RX470, I'm installing on Ubuntu 16.04 and after installing all the drivers, after rebooting, let me not log and freezing.
Could explain the steps to follow,Thanks!
I'm also seeing how many problems have, I might advise a mining pool that is running, and how to create a wallet that no problems and can be used with this mining
Thanks
|
|
|
|
|
