Show Posts
|
Pages: [1]
|
anyone test, with 1080Ti?
 Can you please share yours tdp, gpu and memory settings ?
|
|
|
I have a question. Do these cards have ball bearing or sleeve bearing fans?
ASUS ROG STRIX GAMING GeForce GTX 1080Ti 11GB ASUS ROG STRIX GAMING GeForce GTX 1080Ti OC 11GB
|
|
|
Have you 90mm from middle to middle of the card ?
|
|
|
I think Claymores ZCash Miner is possible to be used because you can use unencrypted communications with higher DevFee.
|
|
|
The sha256 sum is different. This is not original. Something has changed.
|
|
|
I would go for riser 2 because the voltage regulator much better for the rx470 and rx480
If you are using a other card you can go with riser 1 doesnt matter so much.
Can you explain me why is the riser 2 better for rx470 and rx480 ? I think the difference is that version 2 is using power supply 12V only (you can use independent 12V power supply) and other versions need 12V and 5V. The disadvantage is that linear regulator heating more than other versions, due to higher voltage drop.
|
|
|
I have riser number 2 and the voltage regulator is little bit hot. Is it normal ?
|
|
|
Here is my setup I have...  New cards!!! 2x R9 290 Still using the R9 390 in the setup took out the 7850 locked in 95MH. Picked up the 2 R9 290's for $270 . Im only 13 don't judge. Do you have 12V HP power supply for graphics card and risers powering ? Main power source powering main board and the 12V HP power of graphics cards ?
|
|
|
The maximum that I have seen on my 280x and 7970 was 250 h/s. How can I get 290 h/s? Do a modified BIOS provides significant increase?
on stock bios max is 260H/s on 7970 and 280x. If you want to near 290H/s from tahiti, hack bios, but don't forget to make a backup   I have 2x ASUS R9280X-DC2T-3GD5 and 1x Sapphire R9 280X TOXIC 3GB GDDR5. All of them has Hynix memory. How can I modify bios to significant increase hash rate ? Do you have any tutorial ? Thank you.
|
|
|
Are you mining to a wallet or an exchange? What is the reason to send to btc and then another btc address?
Yes, there are transaction fee's involved so you must account for those when sending to different address. I mine under one address on an exchange there are no charges involved for this, only pool side fee's.
My advise is to keep to one address.
I am mining to a freewallet.org wallet. Then I sent ZEC to BTC. And now I would like to send BTC to poloniex BTC account. Is better to mine to poloniex address or leave ZEC in the wallet and send when I will have higher amount ? I do not known diference between mining to wallet and to exchange. Mining to wallet is freewallet.org and mining to exchange is poloniex ? Thank you.
|
|
|
Hello, I mined about 0.05 ZEC per day usually. I send it to the BTC address. I am going to send it to another BTC address but I have to pay high fee because I have to consolidate a lot of small amounts. How do you do it with yours ZEC ? Thank you. TOM
|
|
|
if you are in Europe - how much they write on invoice? (because high VAT...)
If you have a company, are from europa and own a vat number, it'll be an intra-community delivery. In other words, no tax. Greetings I am from europe and i have VAT. Can you tell me price and where to buy one please ? Thank you.
|
|
|
where to get menoro wallet address. I have tried poloniex and mymenoro's waller address but every time i got error message saying invalid address  try this: https://moneroaddress.org/
|
|
|
whats the min. payout from dwarfpool, if using exchange address? Is it 5.0 or 0.2 xmr? Website is confusing. 5 xmr would need at least 40 480's
its 1 like this:  I have the address from https://moneroaddress.org/ Do I have exchange address or any other? What is the minimal payout from dwarfpool ? Thank you.
|
|
|
What is the best driver version to mine etc or eth in AMD 7950? I am asking the question in different thread but no one replied.
The one that gives you undervolting capability with Afterburner or Trix. 15.7.1 works for me. How to undervolt and is it safe for my gpu? What should i expect from a single and 7950 gpu in eth mining now? Undervolting is totally safe and it even brings down the heat and power usage. I am getting 15Mh from a 280X, I think you can expect anywhere near that since it's the same chip. I have R9 280x. How much can I undervolt ? You can run at 950 mV and 850 MHz. It depends on the quality of the card. That is more or less ballpark figure. 850 MHz with GPU Clock or Memory Clock ? I have 1070/1600MHz default values.
|
|
|
What is the best driver version to mine etc or eth in AMD 7950? I am asking the question in different thread but no one replied.
The one that gives you undervolting capability with Afterburner or Trix. 15.7.1 works for me. How to undervolt and is it safe for my gpu? What should i expect from a single and 7950 gpu in eth mining now? Undervolting is totally safe and it even brings down the heat and power usage. I am getting 15Mh from a 280X, I think you can expect anywhere near that since it's the same chip. I have R9 280x. How much can I undervolt ?
|
|
|
Very nice. Where did you buy this case ?
|
|
|
Anyone mining with r9 380? How many h/s per card? thanks
|
|
|
Can you tell me how to delete rig from the list of my rigs ? Thank you.
|
|
|
|