Show Posts
|
Pages: [1] 2 3 4 »
|
Hi folks
I asked this question in PhoenixMiner thread but got no reply, I hope maybe you guys can shed some light. Does anyone know how to setup profit switching with Polaris 4G cards on zergpool using Phoenix miner command lines? This is what zergpool is suggesting (not applicable to Phoenix miner):
-a ethash -o stratum+tcp://ethash.eu.mine.zergpool.com:9999 -u ethAddress -p c=ETH,mc=CLO/DBIX/ELLA/ETHO/PIRL
The coins listed above are all sub 4GB dag
Any help is appreciated.
-pool ethash.eu.mine.zergpool.com:9999 -wal %ETHWALLET% -pass c=ETH,mc=CLO/DBIX/EGEM/ELLA/ETHO/EXP
|
|
|
Sapphire rx580 8G Samsung strap 1 rxboost 1 33,5 Mh/s 1250@2200 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi66.tinypic.com%2F2uoszfp.png&t=663&c=m6ht3uJTr5ZVhg)
|
|
|
Hey! What about Russia in country field??
|
|
|
Samsung ubermix 3.1 is way to unstable. GOOD micron is working fine.
Anyone have GOOD for samsung?
For my Strix RХ480 8Gb (Samsung memory) used PBE 1.6.7 "One click timing patch". Timings are identical to Uber 3.1. My card is stable with this modification and without further additional settings gives 29.3 MH/s. Try this timing 777000000000000022CC1C00106A5D4DD0571016B90D060C0060070014051420FA8900A00300000 01011333DC0303A17 and get 31 MH/s @ 1150/2150
|
|
|
Hi Claymore! Please, add option -minspeed as in dual miner
|
|
|
Yeah here too nanopool reports 8500hs and claymore 9400hs
Hmmm. +1 Claymore, what can you say about this?
|
|
|
anyone running this miner stable?
Yes, very stable AMD drivers 17.11.1 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi98.fastpic.ru%2Fbig%2F2017%2F1116%2Faa%2Fa3e944dd3f975b5f1599203aabf8e9aa.png&t=663&c=qjH6mfdgkLJp1Q) For your RX 470 used 1750 timing to 2000 ? Or what is best option for this very nice results? Uber-Mix Extreme v3.1 timings
|
|
|
anyone running this miner stable?
Yes, very stable AMD drivers 17.11.1 Which kind of card do you use ? RX470 ? Sapphire Nitro+ RX470 8G Samsung
|
|
|
anyone running this miner stable?
Yes, very stable AMD drivers 17.11.1 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi98.fastpic.ru%2Fbig%2F2017%2F1116%2Faa%2Fa3e944dd3f975b5f1599203aabf8e9aa.png&t=663&c=qjH6mfdgkLJp1Q)
|
|
|
So you can OC memory with Overdriventool? Someone says that it's not working. Is GPU-Z showing those memory clocks? HWinfo64 not always show the right info, but I only had problem with showing voltages there. Are you using 0.2.0? There is newer version 0.2.1.
Yes, I had version 0.2.0 installed and running with blockchain drivers (23aug). Just did the DDU, installed new driver (complete suite due to needed workload (compute) change using GUI) .. patched, restarted, changed Workload to compute for all GPU, retarted again .. OC/UV profile from OverdriveNTool are started automatically (via batch file) when the Windows starts As I said previously, no performance drop, all working just fine with 8 cards.. Going to play with it tonigh and will try to make 12 or 13 cards works on AsRock H110 PS: Also, will try to setup compute workload using regedit.. I've been suggested a solution so no AMD GUI will be needed if that works Hi, can you share you reg file for compute mode ON ? Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000] "KMD_EnableInternalLargePage"=dword:00000002 And for 0001, 0002, etc.
|
|
|
ok so i tested 1500 straps on my rx470 with 1880 memory but it s worse than 1375traps get only 689h used -h 940
its also worse on eth lose almost 1mh best is 1375traps for me
-h 1830,1900 -dmem 0
|
|
|
how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?
Read my previous messages and what straps do you use ? i tested the setting i only get 750h my memory is limited to 1870mhz currently on 1375straps i think can you check what speed you have if you put memory one 1870 ? Uber 3.1 straps for samsung and 1500 modified straps for hynix
|
|
|
how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?
Read my previous messages
|
|
|
Dear Mr. Claymore, will you fix -cvddc option in you ZCash miner on AMD Blockchain drivers? (like in Cryptonote and Dual miners)
|
|
|
v 10.2 driver 16.9.2 NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940
Max 760 h\s per card 480x Why I can reach 900 ? What I need to do ?
on eth I have 30+-
Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s... I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s? are you sure you can do better than 750h on 4Gb version ? because double thread won't work on 4gb version i have the 1375 timing if i remember with max 1870 memory (they start at 1900 when new but now had to get them down because memory errors) i tested all the traps last year that was the fastest one on monero with claymore 9.7 i think, so i have around 735h/s ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi92.fastpic.ru%2Fbig%2F2017%2F1021%2Fa3%2F323cde4a6b5c286c2e6833dded122aa3.png&t=663&c=-hcuxyGcpjWsHg)
|
|
|
v 10.2 driver 16.9.2 NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940
Max 760 h\s per card 480x Why I can reach 900 ? What I need to do ?
on eth I have 30+-
Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h
|
|
|
Dear Mr. Claymore, will you fix -cvddc option in you ZCash miner on AMD Blockchain drivers? (like in Cryptonote and Dual miners)
|
|
|
does hash faster with the "normal" AMD driver or the blockchain one?
With blockchain drivers hashrate faster. About 980h/s on RX480 8G samsung At what wattage is that? About 680W 5*RX580 "from the wall" that's really great. I just optimized a bit my RX470s 4GB and it is around 850, can't squuze more. This pulls 620W for 6 GPUs. Compared to sgminer it is better hashrate at a lower wattage. Would you share your core freq pls? 1250@960-980mV
|
|
|
5*RX 480 8G Samsung, uber 3.1 straps: default settings (-h 1800 -dmem 1): ~4920 h/s my settings (-h 1830,1900 -dmem 1): ~4970 h/s
5*RX 480 4G Samsung, uber 3.1 straps: default settings (-h 900 -dmem 1): ~4280 h/s my settings (-h 1830,1900 -dmem 0): ~4630 h/s
|
|
|
does hash faster with the "normal" AMD driver or the blockchain one?
With blockchain drivers hashrate faster. About 980h/s on RX480 8G samsung At what wattage is that? About 680W 5*RX580 "from the wall"
|
|
|
|