Claymore's CryptoNote AMD GPU Miner v11.3

[carlo_0000]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

and what straps do you use ?
i tested the setting i only get 750h  my memory is limited to 1870mhz currently on 1375straps i think
can you check what speed you have if you put memory one 1870 ?

[IojkinKot]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

and what straps do you use ?
i tested the setting i only get 750h  my memory is limited to 1870mhz currently on 1375straps i think
can you check what speed you have if you put memory one 1870 ?

Uber 3.1 straps for samsung and 1500 modified straps for hynix

[adlian]

My first post here ,

does it works with nanopool.org , pls help me to config the bath file (Bulgaria , Europe) AMD cards 470 , 480 , 8 Gb

[Call_Me_Bambi]

My first post here ,

does it works with nanopool.org , pls help me to config the bath file (Bulgaria , Europe) AMD cards 470 , 480 , 8 Gb

There is a help page on Nanopool that shows what you need to do for configuring Claymore to work with Nanopool;
https://xmr.nanopool.org/help

Example Nanopool .bat settings.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

(to mine to your own wallet)
NsGpuCNMiner.exe -xpool ssl://xmr-eu1.nanopool.org:14433 -xwal ADDRESS.WORKER -xpsw x -ftime 10 -h 0 -dmem -1

(to mine to an exchange)
NsGpuCNMiner.exe -xpool ssl://xmr-eu1.nanopool.org:14433 -xwal ADDRESS.PAYMENT-ID.WORKER -xpsw x -ftime 10 -h 0 -dmem -1

..but I would recommend using Mining Pool Hub (MPH) https://miningpoolhub.com/ there is a lot of support available for MPH at https://bitcointalk.org/index.php?topic=472510.0

This is my Claymore .bat file configuration for MPH to mine Monero.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal USERNAME.WORKERNAME -xpsw x  -ftime 10 -h 0 -dmem -1

[Eisenkopf89]

@Claymore, Hi! Is it possible to add support for older cards? HD Series 69xx

v10 supports only ASM mode, so old cards are not supported, also RX550 is not supported currently.
I can add non-ASM mode but it will work slowly, so it's better to use v9.7 for cards that are not supported by v10.

It would be nice if the new version works with the RX550

[carlo_0000]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

and what straps do you use ?
i tested the setting i only get 750h  my memory is limited to 1870mhz currently on 1375straps i think
can you check what speed you have if you put memory one 1870 ?

Uber 3.1 straps for samsung and 1500 modified straps for hynix

ok thanks i will try 1500 trap

[Grinner888]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

I can't find  any related to RX470. anyway I am using the bios I modded using 1500 straps for my hynix cards. I am getting 28 mh/s from them with ETH. with XMR running them at 1100 core / 2000 mem

[Beyerd17]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s...

I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s?

I believe it will work for both 4gb and 8gb Cards, I have 4gb Cards myself and have never had any problems with those.

[NewbieMiner17]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s...

I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s?

I believe it will work for both 4gb and 8gb Cards, I have 4gb Cards myself and have never had any problems with those.

But what did you do? Put 1:500 Straps on rest of options? What does the 1:or2: even represent in this case?

[nowaltcoin]

Hi Mister Claymore,

my wishlist for Version 10.x 

Support for HD 7790 (Bonaire)
Problem solved for HD 7850/R9 270 (Pitcairn) a lot of wrong shares
and at least slighter less power usage.........

At the moment i'am living with version 9.7 but i can see in version 10.2 there is room for improvement!

(sgminer is slighter faster with less power but less stable)
(XMR-stak-amd is also faster but not working in all configuration/all cards)

so 10.x will be the winner, hopefully!

Thanks for your work and i'am looking forward to the new version

[adlian]

Thanks a lot - your help worked out
pls help me to config the .bath file for CPU mining in MPH : 8320 amd 8 cores ; till now it worked in 'the nanopool >
NsCpuCNMiner64.exe -o stratum+tcp://xmr-eu1.nanopool.org:14444 -u deposit address.payment ID.worker -cpu -p x -t 6
(Claymore CryptoNote CPU Miner v3.5 Beta - POOL)

This is my Claymore .bat file configuration for MPH to mine Monero.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal USERNAME.WORKERNAME -xpsw x  -ftime 10 -h 0 -dmem -1

[Call_Me_Bambi]

Thanks a lot - your help worked out
pls help me to config the .bath file for CPU mining in MPH : 8320 amd 8 cores ; till now it worked in 'the nanopool >
NsCpuCNMiner64.exe -o stratum+tcp://xmr-eu1.nanopool.org:14444 -u deposit address.payment ID.worker -cpu -p x -t 6
(Claymore CryptoNote CPU Miner v3.5 Beta - POOL)

This is my Claymore .bat file configuration for MPH to mine Monero.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal USERNAME.WORKERNAME -xpsw x  -ftime 10 -h 0 -dmem -1

I don't use CPUs to mine and so I have not bothered to find out how to set up a miner to mine with a CPU.
There are different miners for use with CPUs, just Google "CPU miner Monero".

[carlo_0000]

ok so i tested 1500 straps on my rx470  with 1880 memory  but it s worse than 1375traps  get only 689h
used -h 940

its also worse on eth lose almost 1mh  best is 1375traps for me

[IojkinKot]

ok so i tested 1500 straps on my rx470  with 1880 memory  but it s worse than 1375traps  get only 689h
used -h 940

its also worse on eth lose almost 1mh  best is 1375traps for me

-h 1830,1900 -dmem 0

[carlo_0000]

ok so i tested 1500 straps on my rx470  with 1880 memory  but it s worse than 1375traps  get only 689h
used -h 940

its also worse on eth lose almost 1mh  best is 1375traps for me

-h 1830,1900 -dmem 0

ok thanks

forgot to try -dmem0    i get 805 on the 1375 strap,  test 1 gpu with 1500 strap but got only 724

i don't understand why me straps 1375 are faster  does it have to do that people have 2000+ ram on 1500 strap ?  did they test 1375trap ? maybe it s even faster

[marcos5872]

ok so i tested 1500 straps on my rx470  with 1880 memory  but it s worse than 1375traps  get only 689h
used -h 940

its also worse on eth lose almost 1mh  best is 1375traps for me

-h 1830,1900 -dmem 0

Thanks for you coments, I reached 900 h/s on my rx 580 4 gb.

[xeridea]

Anyone tried the new AMD driver to see if you can do HBCC on more than 4 vegas?

[bossbamboo]

thank for the miner
It's the best miner that I ever used.
I got  770 h/s on rx 570 @core 1150 MHz ,mem 1950Mhz and 730 on rx470 @core 1200 MHz ,mem 1750Mhz.

[djdion]

when this miner optimize for VEGA series?

[garytheasshole]

when this miner optimize for VEGA series?

https://bitcointalk.org/index.php?topic=2256917.140 New player in town, allegedly ripped off xmr-stark-amd.