 Show Posts
|
|
Pages: [1] 2 3 »
|
|
lol. WHAT THE PAC?! we are really PACed!!
|
|
|
|
|
AGAIN, check your pcie and sata cables, every part of it and see if there are some burn............................................................always
this is one of the main reason of CRASHING..................................
|
|
|
|
|
trully like the marketing roadmap of flashcoin
ROLLOUT PLAN
-Remittances -UAE --> INDIA, PH, etc..
I will support this plan as I know how many expats here in UAE sending money to their countries like India and Philippines. (I am one of those)
|
|
|
|
|
the more exposure, the better, spread the word mates!!!
|
|
|
|
now I know why the value is spiking like this  Tonight – December 3, 2017 – the full moon is what we in the Northern Hemisphere call a Cold Moon, Moon Before Yule, or Long Night Moon. It’s also the year’s one and only full supermoon. In other words, it comes close enough to Earth (222,443 miles or 357,987 km) to enjoy supermoon status. The astrologer Richard Nolle, who is credited with coining the term, defines a supermoon as: |
|
|
|
Hello, I dont know if you can help me but I have a problem with my RX 580 radeon pulse under window 10. When I launch claymore I have 22 Mhs with a memory clock of 2000Mhz. However when I overlock the 580 with afterburner to 2100Mhz or higher the Mhs does not change and stay at 22. it is really strange because I can overlock my 1060 with not problems. Do you know what the issue could be? Or do you know where I can find the answer? Thanks a lot in advance  backread, review everything like bios mod and your rx 580 driver. |
|
|
|
|
I have been reading the post since the mainnet live starts and hahaha. I guess its better if we give it a try, I mean who gives a ***K if we waste "lets say a day or so" for mining, atleast we tried. If bitfools is right, then thanks a lot mate for passing the concept to us!
Jack Ma said
"It doesn't matter if I failed. At least I passed the concept on to others. Even if I don't succeed, someone will succeed."
hell i dont know who is Jack Liao and Jerry hahaha, Jack Ma just came into my mind!
Good luck!
|
|
|
|
Hey all!! If you want to help support Pirl, how about adding a signature?? Having some issues with the hero/legendary signature. Will update!Member: █▀▀▀█░█░█▀▀▀█░█░░░░ ► * No ICO | Fair Launch | Bounties ◄ * Discord█▄▄▄█░█░█░▄▀░░█░░░░ ► * PoW | Masternodes Coming Soon! ◄ * Forums█░░░░░█░█░░▀▄░█▄▄▄█ ► * ASIC-Resistant | Ethash GPU Mining ◄ * Twitter[url=https://pirl.io]█▀▀▀█░█░█▀▀▀█░█░░░░[/url] ► * No ICO | Fair Launch | Bounties ◄ * [url=https://discord.gg/z4faFxD]Discord[/url]
[url=https://pirl.io]█▄▄▄█░█░█░▄▀░░█░░░░[/url] ► * PoW | Masternodes Coming Soon! ◄ * [url=https://forum.pirl.io/]Forums[/url]
[url=https://pirl.io]█░░░░░█░█░░▀▄░█▄▄▄█[/url] ► * ASIC-Resistant | Ethash GPU Mining ◄ * [url=https://twitter.com/PirlOfficial]Twitter[/url] Full/Sr: █▀▀▀█░█░█▀▀▀█░█░░░░ ► * No ICO | Fair Launch | Bounties ◄ * Discord█▄▄▄█░█░█░▄▀░░█░░░░ ► * PoW | Masternodes Coming Soon! ◄ * Forums█░░░░░█░█░░▀▄░█▄▄▄█ ► * ASIC-Resistant | Ethash GPU Mining ◄ * Twitter[url=https://pirl.io][color=green]█▀▀▀█[/color][color=transparent]░[/color][color=green]█[/color][color=transparent]░[/color][color=green]█▀▀▀█[/color][color=transparent]░[/color][color=green]█[/color][color=transparent]░░░░[/color][/url] ► [b][color=red]* No ICO | Fair Launch | Bounties[/color][/b] ◄ [url=https://discord.gg/z4faFxD][color=green]* Discord[/color][/url]
[url=https://pirl.io][color=green]█▄▄▄█[/color][color=transparent]░[/color][color=green]█[/color][color=transparent]░[/color][color=green]█[/color][color=transparent]░[/color][color=green]▄▀[/color][color=transparent]░░[/color][color=green]█[/color][color=transparent]░░░░[/color][/url] ► [b][color=green]* PoW | Masternodes Coming Soon! [/color][/b] ◄ [url=https://forum.pirl.io/][color=blue]* Forums[/color][/url]
[url=https://pirl.io][color=green]█[/color][color=transparent]░░░░░[/color][color=green]█[/color][color=transparent]░[/color][color=green]█[/color][color=transparent]░░[/color][color=green]▀▄[/color][color=transparent]░[/color][color=green]█▄▄▄█[/color][/url] ► [b][color=blue]* ASIC-Resistant | Ethash GPU Mining[/color][/b] ◄ [url=https://twitter.com/PirlOfficial][color=red]* Twitter[/color][/url] Nice, thank you :-) I also wanted this Sig but I got only 150 max characters limit  |
|
|
|
@ Masterdubs, CHRIS, Guru and all Devs, I would somehow advise to create Official Facebook Page for Pirl as way of promoting our coin keep us updated. More power! Wilb |
|
|
|
GOOD JOB GURU! FROM EARTH TO THE MOON! I CANT IMAGINE IF IT HITS PLUTO! Winter is really coming! All we need to do now is to support this coin as its potential is so apparent and happening!! |
|
|
|
I can't get this to work on my PC. It crashes after about 10-15 seconds on startup
Under clock. Or change the riser. The miner actually doesn't start. CMD closes after that amount of time. Can't even get logging to work to figure out what's wrong. Check your Power Supply Unit and cables, check if there are burnt cables one by one This solved my issue before. Good luck! Wilb |
|
|
|
Im still having problem with the freeze issue ......
I can confirm I can have the same issue with Claymore freezing along with windows
These look exactly like the problem I had. Sorry that my solution did not work for you guys as well. It is possible that I have misunderstood the solution in my case. Maybe I did something else (except from lowering -cvddc) that fixed the problem and I missed that. I will be thinking of it through the day, trying to recall my actions during my tests. One thing I can think of straight away is this: initially I lowered my -cclock from 1140 to 1130. After I did that, my next step was to lower my -cvddc from 875 to 850 (which I took as a solution) Those things may seem insignificant for you, but I will say something that may ring a bell for you: I have noticed that Claymore v.10.0 sometimes has some sort of "delayed effect". Changing a setting (lets say -cclock or cvddc) will not take affect the first time you start the miner!This has happened to me more than once. I have set a new value on a parameter, I run the miner, I did not notice the change I would expect, I restarted the miner and then the desired changes appeared. This problem may have the same cause as this one: Sometimes miner can't reach maximum speed. I open the miner, clocks and voltages are being set properly but hashrate lies in the 225mh/s area. A simple miner restart resolves the issue
which is a problem I have not yet resolved. A simple -minspeed will save me from trouble in this case, so I will not be spending much time on this one So whatever you try as a "fix", restart your miner a couple of times to be sure I guess I have seen the problem  Im so sorry if i neglect the PSU and its cable thing.  Thanks a lot guys, i hope it will keep mining afterthen. |
|
|
|
|
Im still having problem with the freeze issue after doing some changing slot and replacing risers, changing drivers from 15.3 to the latest(cant control the fan), changing CM version from v6 to v10, checked the cables but there is nothing wrong, trying 4 cards from previous 5 cards running still freezes, doing GEN 1 from GEN 2 but all of them seems doesnt fix it. it still freezes. I removed the PSU thing since I have 1800w supply.
One thing I did not do it yet is reinstalling the OS because it would be my last resort and hope would fix it.
Also I noticed, after a couple of minutes when the CM runs, there is a cmd showing then it disappeared, several minutes afterthen the rig would freeze. Im really so confused because everything just started 3days ago, this R9 rig is running without any issue and I dont have any problem with it.
What I do now is Im trying to run it under SMOS and its running for 30minutes now, I will update this one later.
WIN10
MOBO z87 Deluxe
4x r9 290
1x r9 390
PSU 1050w + 750w
RAM 16gb
|
|
|
|
I've been struggling to get my rig to work for two weeks. It was mining fine 24/7 for days at a time. Then it froze, and ever since then it'll mine for a minute, two cards will go to zero hash rate, and Windows freezes. Tried reinstalling drivers. Connecting them in various orders. No one card seems to be causing the problem. I'm at a loss here and this thing is sucking up all my time.
Win10, rx580s (one 480). 1000W evga psu. Biostar mobo.
hi there, just wanna ask, did you fix your problem? windows freeze? I got the same issue, my rig was working great two days ago but yesterday it just started to freeze. i know this is not the mobo, gpu, riser thing because I have been doing the troubleshoot since the problem starts, (changing of risers, exchanging pcie slots, changing the CM versions from v10 down to v6 but still no luck. I hope we could help other here. WIN10 MOBO z87 Deluxe 4x r9 290 1x r9 390 PSU 1050w + 750w RAM 16gb |
|
|
|
|
Hello there Chris,
I hope soon you will also provide pools for the 2nd coin like Pascal, Siacoin, and Decred for the dual mining.
|
|
|
|
|
hello dev, i hope you will not push the update dagfix in the system right now as it will give us power consumption issue. I am enjoying the latest update as the "pci=noaer" is fixed. Also, soon if possible, you would add an option in the RIGs List if which driver should we use so we can choose the best settings for the mining. I dont know if thats possible hehehe, atleast i suggest. Once again, thanks a lot for the update.
|
|
|
|
At the moment we are still in need of Expanse Miners HMMM i will give it a try Impress me with your pool... Hahaha, hope we can, but our variance seems to be very good at the moment.  I can put my another rig to it, meanwhile the other one is running on it. Im still obrserving the profit til it reaches 24hrs of mining. If Im gonna have 300mh/s, how much would i have per day? How is it running? running for 5 days now and great compare to suprnova. Im happy with this and I hope it will keep going. Thanks |
|
|
|
Ok so I did the my first successful 1500 strapping on my two rx 470 4g. One is at 23 mh/s and the other 22. Up from around 19.5. Is that good? What can I do next for more performance!
1150 MHz core clock, 2000 - 2100 MHz memory clock should get you to ~29 MH/s stable with a good timing strap bios mod. Also run HWinfo 'sensors only' to check for memory errors and reduce the memory clock by 25-50 MHz until there are no errors. Im up to 26 mh/ each now. at 1150 1950 -70 voltage. Past 1950 is black screen. Not bad for 470 4g It should be higher. Try increasing the -ethi to 8. My eight card mixed RX 570/570 4GB/8GB rig is getting 28.5 to almost 30 MH/s dual mining UBQ.  If you are on Windows mining ETH make sure you have the blockchain drivers with the epoch Dag fix patch. you got that 28.5-30 mh/s owing to low epoch of Ubiq I believe. try to mine etc at epoch 144 and you will see. |
|
|
|
At the moment we are still in need of Expanse Miners HMMM i will give it a try Impress me with your pool... Hahaha, hope we can, but our variance seems to be very good at the moment. I can put my another rig to it, meanwhile the other one is running on it. Im still obrserving the profit til it reaches 24hrs of mining. If Im gonna have 300mh/s, how much would i have per day? |
|
|
|
I am disappointed with Expanse.
I tried mining this afternoon as whattomine says its currently more profitable than ETH (plus I want to explore my options should ETH not be profitable anymore) and 9 hours later, my balance is showing almost 25% less of what's calculated in whattomine.
I know, i know that those aren't exact values that i'll get due to difficulty, fluctuation, etc - I get it. But seriously, 25% less?? Who's stupid enough to want that?
If I didn't diverted from ETH, i'd still be getting what i'm getting per day, regardless if ETH dips down or gets back up.
Just waiting for my EXP to hit 1.00 and after payout, I might not be back ever again.
Or you know, until dwarfpool or suprnova sorts their stuff out.
yes, whatomine shows me i would have 2 exp/day, but when after 24hrs of mining, the suprnova only gave me 1 exp. |
|
|
|
|
