Hello,

I have two scenarios, where I don't have a solution. And I'm not able to search only in this entire thread, is that possible?

Maxximus007_AUTO_TEMPERATURE_CONTROL is disabled
Config is set to REMOTE

1) Sometimes the miner get stuck. This means, that I can still open the session (screen -r miner), but I cannot kill it (pkill -e miner).
If I happen to be in that situation, how do I kill the miner? Sending a pkill -9 -e miner also doesn't help.

2) After the miner gets killed (via pkill -e miner), there is no screen session opened again (screen -ls returns nothing). How can I manually start the 1bash script again, so that it starts the corresponding and correct screen session?

Thanks very much in advance.
Kind regards

Sorry but that's not really related to my question. It's no problem how loud the graphic cards are, they should just run at 100%. The cooler the card, the longer the lifespan. And at the moments in the room I really need them to run at 100%. They get 70 degree at 50% which is too much.

Hello,

first I want to say thank you very much for the amount of effort and work that you put into this software image.
I am also using v0018, but unfortunately the fan speed is not set correctly (I want to set it to 100%).

I have modified the following values in the script:


Additionally I can see upon startup, that nvidia-cli is setting the fan speed correctly. But however, Claymore is only showing a fan speed of 50%. Furthermore, the temperature is 70 C°, which states that the max temperature setting in the script is also not working as intended.

My hardware:

MB: Asrock Z170 Pro 4
GPU: 5x MSI GTX 1050Ti

Thanks very much in advance.
Kind regards.

Hello,

I am desperately trying to increase the hash rate of my XFX RX 480 (RX-480M8BFA6), but no matter which Bios I try, none is better than the stock bios.

In fact, every bios results in a lower hash rate than the stock bios.

Stock: 21 MHs (which is not much either)
Other ones: 8 - 18 MHs

Also in specific, with the 480LowEnergyOK.rom I only get 8 MHs. Some of the ROMs I also tried (but none gave me a higher hash rate than 18 MHs):

Several from Anorack (memshift, overclock)
low-pwr-29MH-Boysie.rom
3x3LowPwr.rom
WIN-RX480-31.25-Boysie_v2.rom

I also tried copying the 1750MHz strap to the 2000MHz strap of my stock bios, but that let's my computer crash.

Do you have any idea what could be the reason that no other ROM gives me a higher hash rate?

Thanks very much. Kind regards

Do you have a working link for a BIOS version for the XFX RX 480 8GB?

I already tried Boysie's RX480 BIOS, but it's not giving me more hashing power.

I am mining with the Zcash Claymore v8.0.

Unfortunately, the link on the start page (as stated from several other ones before) is broken: https://bitcointalk.org/index.php?topic=1584617.980

Thanks. Kind regards

Thanks for the input.
Just did a safe reboot DDU, then installed Crimson 16.10.2 and executed 6gpu_mod (including Force, Modify Registry and Restart).

The result unfortunately is the same:



Any help would be appreciated.
Otherwise I have to also try Winsrv2016.

Thanks

Thanks for the hint. Do I have to take anything special into account?
Or is it just installing Windows Server 2016 GUI-Version, installing the newest AMD driver for the RX 480, running the 6xGPU Mod and then it should work?

Did you already test Windows Server 2016? Because I tried WinSrv2012R2 but I wasn't able to install any of the AMD drivers. It always failed due to the message "Application install: install package failure". I installed all the c++ redistributables, but couldn't get it working, therefore I switched to Win8.1.

Thanks

Hello,

I have the following setup running:

6x XFX RX 480
Asrock Pro BTC
Windows 8.1

The problem is, the driver 15.12 is not working for RX 480 anymore, therefore I have to use the newest driver, which at the moment is Crimson 16.11.5.
Five GPUs are working fine, but I can't get the sixth GPU recognized from the system.

I also tried 6xGPU Mod with 16.11.5, but it's not working. It's not an issue related to a clean uninstall, because I've successfully used DDU with a safe restart.

I also tried the drivers 14.4 and 16.1.1, but they are also not able to be installed on the RX 480.
The problem always is, that only the two options "HDMI Audio Driver" and "AMD Install Manager" can be selected, but after clicking the Install button, the installation is finished within a few seconds and ONLY those two items have been installed but no display drivers.

Do you know any fix for getting the sixth GPU to work with the 16.11.5 driver version?

Thanks very much in advance.

Kind regards,
- hwlgraka