Latest posts of: Neverest

Show Posts
Pages: [1] 2 3 4 5 6 7 8 »

Alternate cryptocurrencies / Tokens (Altcoins) / Re: [ANN] Honey HNY - 1hive project on xDAI Chain

on: October 23, 2020, 07:26:53 AM

Quote from: indo1 on October 22, 2020, 06:16:47 PM a good project for those who like to mine, who are converted to farms, risking the amount they will get, the farm is very trendy at this time, it's just that the fee for eth is still high because many have switched to the BNB chain, it will recover shortly again and the community will be active again in the eth network The fees for the hny.farm are about $0.0000001ct for swapping, pooling, staking, and harvesting. Together! No way that ETH will ever have such great fees. You can compound the HNY farm or switch farms daily virtually without cost, it's amazing and addictive!

Alternate cryptocurrencies / Tokens (Altcoins) / Re: [ANN] [PRE-ICO] | HEARDBEATS | THE NEXT STEP IN LIVE CONCERTS

on: October 30, 2017, 02:35:38 PM

It looks great, congratulations. Due to different timezones, will there be a storage/archive of streamed performances for those who can't see the stream live?

Alternate cryptocurrencies / Altcoin Discussion / Re: [ANN][YAC] YAC Simple Pool [LP][Testing]

on: May 10, 2013, 02:29:09 PM

Quote from: paul21 on May 10, 2013, 01:43:52 PM Share difficulty was bumped to reduce load on the server. Is this why there is no old block info on http://yac.dontmine.me/statsAuth ? How long will it take for blocks to mature/ credits to be added?

Alternate cryptocurrencies / Altcoin Discussion / Re: [ANN][YAC] YAC Simple Pool [LP][Testing]

on: May 10, 2013, 01:42:36 PM

Quote from: paul21 on May 10, 2013, 01:34:13 PM I should have fixed the dropped connections. I hadn't whitelisted my forwarders, oops! Yep, it's better now, thanks. I got it running on Win7 64 and on Ubuntu (in VMware). Both take 50% cpu and connections are good on both. Interestingly the virtual Ubuntu has double hashing speed and much higher amount of accepted shares (10-20 times more), not sure why.

Alternate cryptocurrencies / Altcoin Discussion / Re: [ANN][YAC] YAC Simple Pool [LP][Testing]

on: May 10, 2013, 01:25:39 PM

Quote from: paul21 on May 10, 2013, 01:14:52 PM Quote from: Rannasha on May 10, 2013, 01:12:44 PM Also getting a high reject-count (roughly 25% on both machines) coupled with periodic disconnect messages. Running on Ubuntu (both native & in a Win7 VM). Tried several of the servers. accepted: 8138/8319 (97.82%) for me on the local connection, so I think 502 is related to yac.dontmine.me and mineyac.dontmine.me , try mineyac3 it's not cloudflare Nope, similar results: [2013-05-10 10:19:29] 8 miner threads started, using 'scrypt-jane' algorithm. [2013-05-10 10:19:51] HTTP request failed: Failed connect to mineyac3.dontmine.m e:8080; No error [2013-05-10 10:19:51] json_rpc_call failed, retry after 30 seconds [2013-05-10 10:20:34] Long-polling activated for http://mineyac3.dontmine.me:808 0/LP [2013-05-10 10:20:34] thread 3: 4096 hashes, 12.96 khash/s [2013-05-10 10:20:34] thread 1: 4096 hashes, 12.05 khash/s [2013-05-10 10:20:34] thread 6: 4096 hashes, 10.29 khash/s [2013-05-10 10:20:34] thread 0: 4096 hashes, 10.67 khash/s [2013-05-10 10:20:34] thread 4: 4096 hashes, 12.84 khash/s [2013-05-10 10:20:34] thread 7: 4096 hashes, 10.45 khash/s [2013-05-10 10:20:34] thread 5: 4096 hashes, 9.06 khash/s [2013-05-10 10:20:34] thread 2: 4096 hashes, 9.64 khash/s [2013-05-10 10:20:39] thread 6: 64481 hashes, 13.02 khash/s [2013-05-10 10:20:57] LONGPOLL detected new block [2013-05-10 10:21:04] thread 7: 362667 hashes, 12.28 khash/s [2013-05-10 10:21:04] thread 6: 20 hashes, 10.00 khash/s [2013-05-10 10:21:04] thread 3: 194475 hashes, 6.55 khash/s [2013-05-10 10:21:04] thread 4: 13945 hashes, 0.47 khash/s [2013-05-10 10:21:04] accepted: 0/1 (0.00%), 60.63 khash/s (booooo) [2013-05-10 10:21:06] thread 4: 28324 hashes, 12.47 khash/s <snip> [2013-05-10 10:22:02] thread 0: 32646 hashes, 8.28 khash/s [2013-05-10 10:22:03] thread 7: 269427 hashes, 8.98 khash/s [2013-05-10 10:22:05] LONGPOLL detected new block [2013-05-10 10:22:09] thread 5: 73403 hashes, 3.95 khash/s [2013-05-10 10:22:26] HTTP request failed: Failed connect to mineyac3.dontmine.m e:8080; No error [2013-05-10 10:22:26] submit_upstream_work json_rpc_call failed [2013-05-10 10:22:26] ...retry after 30 seconds [2013-05-10 10:22:27] thread 4: 40262 hashes, 1.40 khash/s [2013-05-10 10:22:31] thread 6: 279067 hashes, 10.33 khash/s [2013-05-10 10:22:34] thread 1: 719558 hashes, 12.22 khash/s [2013-05-10 10:22:38] thread 3: 626870 hashes, 9.65 khash/s [2013-05-10 10:22:48] thread 2: 785565 hashes, 10.57 khash/s [2013-05-10 10:23:18] HTTP request failed: Failed connect to mineyac3.dontmine.m e:8080; No error [2013-05-10 10:23:18] submit_upstream_work json_rpc_call failed [2013-05-10 10:23:18] ...retry after 30 seconds [2013-05-10 10:24:09] HTTP request failed: Failed connect to mineyac3.dontmine.m e:8080; No error [2013-05-10 10:24:09] submit_upstream_work json_rpc_call failed [2013-05-10 10:24:09] ...retry after 30 seconds etc.

Alternate cryptocurrencies / Altcoin Discussion / Re: [ANN][YAC] YAC Simple Pool [LP][Testing]

on: May 10, 2013, 01:10:19 PM

I am also getting lots of stales (running under windows): Biggest problem is connection, it seems? Quote [2013-05-10 09:53:10] thread 3: 73641 hashes, 4.50 khash/s [2013-05-10 09:53:10] thread 2: 226694 hashes, 12.62 khash/s [2013-05-10 09:53:23] HTTP request failed: Operation timed out after 30997 milli seconds with 0 out of -1 bytes received [2013-05-10 09:53:23] submit_upstream_work json_rpc_call failed [2013-05-10 09:53:23] ...retry after 30 seconds [2013-05-10 09:54:09] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 09:54:09] submit_upstream_work json_rpc_call failed [2013-05-10 09:54:09] ...retry after 30 seconds [2013-05-10 09:54:54] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 09:54:54] submit_upstream_work json_rpc_call failed [2013-05-10 09:54:54] ...retry after 30 seconds [2013-05-10 09:55:40] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 09:55:40] submit_upstream_work json_rpc_call failed [2013-05-10 09:55:40] ...retry after 30 seconds [2013-05-10 09:56:25] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 09:56:25] submit_upstream_work json_rpc_call failed [2013-05-10 09:56:25] ...retry after 30 seconds [2013-05-10 09:57:11] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 09:57:11] submit_upstream_work json_rpc_call failed [2013-05-10 09:57:11] ...retry after 30 seconds [2013-05-10 09:57:56] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 09:57:56] submit_upstream_work json_rpc_call failed [2013-05-10 09:57:56] ...retry after 30 seconds [2013-05-10 09:58:27] accepted: 1/2 (50.00%), 62.64 khash/s (booooo) [2013-05-10 09:58:28] accepted: 1/3 (33.33%), 62.64 khash/s (booooo) [2013-05-10 09:58:28] Long-polling activated for http://mineyac.dontmine.me:8080 /LP [2013-05-10 09:58:29] thread 7: 15488 hashes, 12.84 khash/s [2013-05-10 09:58:32] thread 4: 49551 hashes, 12.89 khash/s [2013-05-10 09:58:33] thread 2: 59501 hashes, 12.36 khash/s [2013-05-10 09:58:39] accepted: 2/4 (50.00%), 86.34 khash/s (yay!!!) [2013-05-10 09:58:40] accepted: 3/5 (60.00%), 86.34 khash/s (yay!!!) [2013-05-10 09:58:43] LONGPOLL detected new block [2013-05-10 09:58:43] thread 1: 143056 hashes, 9.54 khash/s [2013-05-10 09:58:43] thread 3: 175437 hashes, 11.73 khash/s [2013-05-10 09:58:43] thread 4: 61098 hashes, 13.12 khash/s [2013-05-10 09:58:43] thread 0: 62878 hashes, 4.19 khash/s [2013-05-10 09:58:43] thread 6: 19530 hashes, 1.31 khash/s [2013-05-10 09:58:43] thread 2: 20946 hashes, 6.34 khash/s [2013-05-10 09:58:43] thread 5: 167487 hashes, 11.17 khash/s [2013-05-10 09:58:48] LONGPOLL detected new block [2013-05-10 09:58:48] thread 4: 64145 hashes, 12.74 khash/s [2013-05-10 09:58:43] thread 7: 14634 hashes, 3.14 khash/s [2013-05-10 09:58:49] thread 0: 67879 hashes, 12.96 khash/s [2013-05-10 09:58:49] thread 5: 248 hashes, 13.78 khash/s [2013-05-10 09:58:49] thread 1: 68157 hashes, 12.78 khash/s [2013-05-10 09:58:49] thread 3: 66818 hashes, 12.54 khash/s [2013-05-10 09:58:49] thread 6: 8049 hashes, 3.38 khash/s [2013-05-10 09:58:49] thread 2: 283 hashes, 13.48 khash/s [2013-05-10 09:58:50] thread 4: 12376 hashes, 10.36 khash/s [2013-05-10 09:58:55] thread 5: 77115 hashes, 12.25 khash/s [2013-05-10 09:59:07] thread 0: 223817 hashes, 12.16 khash/s [2013-05-10 09:59:11] thread 4: 69679 hashes, 3.39 khash/s [2013-05-10 09:59:19] thread 1: 366488 hashes, 12.21 khash/s [2013-05-10 09:59:21] HTTP request failed: Operation timed out after 30046 milli seconds with 0 out of -1 bytes received [2013-05-10 09:59:21] submit_upstream_work json_rpc_call failed [2013-05-10 09:59:21] ...retry after 30 seconds [2013-05-10 09:59:27] thread 7: 188370 hashes, 4.93 khash/s [2013-05-10 09:59:42] thread 6: 199715 hashes, 3.78 khash/s [2013-05-10 09:59:42] thread 3: 407517 hashes, 7.66 khash/s [2013-05-10 09:59:47] thread 5: 661684 hashes, 12.65 khash/s [2013-05-10 09:59:53] thread 2: 795058 hashes, 12.50 khash/s [2013-05-10 09:59:54] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 10:00:06] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 10:00:06] submit_upstream_work json_rpc_call failed [2013-05-10 10:00:06] ...retry after 30 seconds [2013-05-10 10:00:52] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 10:00:52] submit_upstream_work json_rpc_call failed [2013-05-10 10:00:52] ...retry after 30 seconds [2013-05-10 10:01:37] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 10:01:37] submit_upstream_work json_rpc_call failed [2013-05-10 10:01:37] ...retry after 30 seconds [2013-05-10 10:02:23] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 10:02:23] submit_upstream_work json_rpc_call failed [2013-05-10 10:02:23] ...retry after 30 seconds [2013-05-10 10:03:08] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 10:03:08] submit_upstream_work json_rpc_call failed [2013-05-10 10:03:08] ...retry after 30 seconds [2013-05-10 10:03:54] HTTP request failed: The requested URL returned error: 502 Bad Gateway [2013-05-10 10:03:54] submit_upstream_work json_rpc_call failed [2013-05-10 10:03:54] ...retry after 30 seconds Etc. It this because of ddos?

Alternate cryptocurrencies / Altcoin Discussion / Re: [GIVEAWAY]FREE BitBar! 0.005 BTB per Person

on: May 10, 2013, 01:01:38 PM

BKMhjtaRWxALLfgmMgBAETrmMdx1r8yczs Thanks!

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 12:10:47 PM

Quote from: kalgecin on May 10, 2013, 11:07:42 AM Quote from: Neverest on May 10, 2013, 10:56:01 AM Quote from: kalgecin on May 10, 2013, 10:46:42 AM try ./yacoind listtransactions to see what you've got so far.... Thanks, but it was the first in the list above and it is empty. Then you haven't got a thing not even an orphan Hooray, I got something! And it's an .... orphan { "account" : "", "category" : "orphan", "amount" : 24.87000000, "confirmations" : 0, "generated" : true, "txid" : "82c018a5eb36ef792886520de4b929186fe92b2940510b21409d95f94560cf78", "time" : 1368185369, "timereceived" : 1368185371 } At least it seems I can keep it running as it seems to do something...

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 10:56:01 AM

Quote from: kalgecin on May 10, 2013, 10:46:42 AM try ./yacoind listtransactions to see what you've got so far.... Thanks, but it was the first in the list above and it is empty.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 10:43:28 AM

Quote from: kalgecin on May 10, 2013, 07:53:00 AM people should come on the linux side seems to have more support now and faster performance At least more support here , but still a major pain in the behind imho. Anyway, had it run for 8 hours on 4 cores, no transactions (no blocks and no orphans). Here is my info and stats/speed, does this seem right, i.e. am I actually mining something? (CPU is definitely used for it). Quote ] me@ubuntu:~/yacoin/src$ ./yacoind listtransactions [ ] me@ubuntu:~/yacoin/src$ ./yacoind getmininginfo { "blocks" : 44245, "currentblocksize" : 1000, "currentblocktx" : 0, "difficulty" : 0.96318342, "errors" : "", "generate" : true, "genproclimit" : -1, "hashespersec" : 190230, "pooledtx" : 0, "testnet" : false } me@ubuntu:~/yacoin/src$ ./yacoind getinfo { "version" : "v0.4.0-nvc-9-g42c2a67-beta", "protocolversion" : 60005, "walletversion" : 60000, "balance" : 0.00000000, "newmint" : 0.00000000, "stake" : 0.00000000, "blocks" : 44246, "moneysupply" : 2362888.41000000, "connections" : 8, "proxy" : "", "ip" : "101.120.190.209", "difficulty" : 0.96336749, "testnet" : false, "keypoololdest" : 1368151445, "keypoolsize" : 104, "paytxfee" : 0.01000000, "errors" : "" } me@ubuntu:~/yacoin/src$ ./yacoind gethashespersec 189215 me@ubuntu:~/yacoin/src$ ./yacoind gethashespersec 311561 me@ubuntu:~/yacoin/src$ ./yacoind gethashespersec 216463 me@ubuntu:~/yacoin/src$ ./yacoind gethashespersec 227699 ?

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 04:30:14 AM

Quote from: Neverest on May 10, 2013, 04:27:54 AM Thanks. Strange, I freshly downloaded vmware player and installed it 3 hours ago, but it is version 5.0.2 build-1031769 ?! Got it from https://my.vmware.com/web/vmware/free#desktop_end_user_computing/vmware_player/5_0 , where did you get the 9.0.2 version? Nevermind, I noticed that the free player version is version 5, the $119 upgrade will get me the workstation 9 version. Now how many Yacs do I need to spend $119 ;-)

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 04:27:54 AM

Quote from: PoolMinor on May 10, 2013, 04:08:04 AM Quote from: Neverest on May 10, 2013, 04:05:13 AM Ha. I found out that the VMware vitrual Machine has a standard setting that uses only one CPU core... When trying to raise this to 6, it tells me that I need to upgrade. I can change it to 4, and it seems to re-initiate. But no difference in CPU usage. Only after completely rebooting Virtual Machine and Ubuntu in it, I could use 4 (out of cores and can now mine with 50% CPU Still not sure if I am actually mining correctly. Hope this helps someone... Which VMWare version are you using? I am using 9.0.2 build-1031769 it supports all 8 cores, I advise upgrading it. Thanks. Strange, I freshly downloaded vmware player and installed it 3 hours ago, but it is version 5.0.2 build-1031769 ?! Got it from https://my.vmware.com/web/vmware/free#desktop_end_user_computing/vmware_player/5_0 , where did you get the 9.0.2 version?

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 04:05:13 AM

Quote from: PoolMinor on May 10, 2013, 03:21:12 AM Quote from: Neverest on May 10, 2013, 03:11:20 AM Quote from: PoolMinor on May 10, 2013, 03:01:56 AM Quote from: kalgecin on May 10, 2013, 02:57:43 AM Quote from: Neverest on May 10, 2013, 02:54:11 AM Thanks! Ah, that makes sense in a weird, Linux kind of way ;-) I have a hashcount but it seems only one core is hashing (of my 2600k I7, which has 4cores/8threads. I only have 12-13% CPU usage. Are the number of cores used hardcoded somewhere? Or can I change it in the yacoin.conf? EDIT: I tried adding genproclimit=7 to the yacoin.conf file, but no difference after restarting. Also tried by restarting with me@ubuntu:~/yacoin/src$ ./yacoind -daemon -gen -genproclimit=7 -addnode=82.211.30.212 me@ubuntu:~/yacoin/src$ YaCoin server starting But still only 12-13% CPU usage and about 65khash/sec? did the wallet sync all the blocks? you can make a gui version of the wallet too Try genproclimit=-1 Thanks, I tried genproclimit=-1, both in .conf as well as in the command, but no difference (12-13% usage only)? I am not sure if all the blocks have been synched, how do I find out? Getpeerinfo gives me 8 peers; Checkwallet gives "true", but no other info. And yes, a GUI version would be most welcome, how would I do that? Thanks ./yacoind getinfo ./yacoind getmininginfo ./yacoind listtransactions ./yacoind gethashespersec Ha. I found out that the VMware vitrual Machine has a standard setting that uses only one CPU core... When trying to raise this to 6, it tells me that I need to upgrade. I can change it to 4, and it seems to re-initiate. But no difference in CPU usage. Only after completely rebooting Virtual Machine and Ubuntu in it, I could use 4 (out of cores and can now mine with 50% CPU Still not sure if I am actually mining correctly. Hope this helps someone...

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 03:11:20 AM

Quote from: PoolMinor on May 10, 2013, 03:01:56 AM Quote from: kalgecin on May 10, 2013, 02:57:43 AM Quote from: Neverest on May 10, 2013, 02:54:11 AM Thanks! Ah, that makes sense in a weird, Linux kind of way ;-) I have a hashcount but it seems only one core is hashing (of my 2600k I7, which has 4cores/8threads. I only have 12-13% CPU usage. Are the number of cores used hardcoded somewhere? Or can I change it in the yacoin.conf? EDIT: I tried adding genproclimit=7 to the yacoin.conf file, but no difference after restarting. Also tried by restarting with me@ubuntu:~/yacoin/src$ ./yacoind -daemon -gen -genproclimit=7 -addnode=82.211.30.212 me@ubuntu:~/yacoin/src$ YaCoin server starting But still only 12-13% CPU usage and about 65khash/sec? did the wallet sync all the blocks? you can make a gui version of the wallet too Try genproclimit=-1 Thanks, I tried genproclimit=-1, both in .conf as well as in the command, but no difference (12-13% usage only)? I am not sure if all the blocks have been synched, how do I find out? Getpeerinfo gives me 8 peers; Checkwallet gives "true", but no other info. And yes, a GUI version would be most welcome, how would I do that? Thanks

Alternate cryptocurrencies / Altcoin Discussion / Re: YACoin - cpuminer released. Very soon pools will be availaible for this coin

on: May 10, 2013, 03:02:13 AM

Quote from: ghostlander on May 10, 2013, 02:11:28 AM Quote from: limitless on May 10, 2013, 02:03:13 AM sudo apt-get install libcurl4-openssl-dev Damn, linux is hard isn't it? Yep, damn hard to figure it out. Autoconf and automake to follow. Downloading and compiling source tarballs must be a rocket science for average user these days. Thanks Limitless, but "libcurl4-openssl-dev is already the newest version" , so that doesn't explain the errors. And no, I would not consider myself an average user, as I was already working for the first Crypto currency company in 1996, and have built and ran many websites past 15 years on Linux servers, but PHP etc make a lot more sense to me than the confusing linux commands. As long as that does not change, even the wonderful (really!) Ubuntu will play 3rd fiddle after Win and (heaven's forbid) OSX.. Anyway, any help is appareciated, whether it is my low intelligence or the rocket science level

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 02:54:11 AM

Quote from: kalgecin on May 10, 2013, 02:42:27 AM Quote from: Neverest on May 10, 2013, 02:38:44 AM Thanks. I got permission, but noticed that there are a bunch of hidden folders that I need to show, including .yacoin... Anyway, I created the yacoin.conf file with added instructions as on www.yacoin.org, thanks for the link. Now I started it (?) with ./yacoind -daemon -gen -addnode=82.211.30.212 and it says: "YaCoin server starting", nothing more, nothing less. - I assume it will need to download the block chain? - How will I know if it is mining and how do I know when a block is found - I have not entered my YaCoin address anywhere, how would it know where to deposit it? (I have it running under windows, but I assume I have a separate wallet unde Ubuntu.) If it uses my address automatically, how do I access the Ubuntu wallet to see the balance and to transfer them? Sorry for all the questions, but I assume I am not the only one. Many thanks. cd ~/yacoin/src/ ./yacoind help that will list all the commands you can send to the yacoin wallet. ./yacoind gethashespersec will show you your speed ./yacoind listtransactions will display all your transactions Thanks! Ah, that makes sense in a weird, Linux kind of way ;-) I have a hashcount but it seems only one core is hashing (of my 2600k I7, which has 4cores/8threads. I only have 12-13% CPU usage. Are the number of cores used hardcoded somewhere? Or can I change it in the yacoin.conf? EDIT: I tried adding genproclimit=7 to the yacoin.conf file, but no difference after restarting. Also tried by restarting with me@ubuntu:~/yacoin/src$ ./yacoind -daemon -gen -genproclimit=7 -addnode=82.211.30.212 me@ubuntu:~/yacoin/src$ YaCoin server starting But still only 12-13% CPU usage and about 65khash/sec?

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 02:38:44 AM

Quote from: limitless on May 10, 2013, 02:23:40 AM Quote from: kalgecin on May 10, 2013, 02:19:17 AM Quote from: limitless on May 10, 2013, 02:17:17 AM The conf file needs to be in ~/root/.yacoin/yacoin.conf That is, if you login as root. it has to be in ~/.yacoin/yacoin.conf read http://www.yacoin.org/ I always login as root so the home dir is /root/ Thanks. I got permission, but noticed that there are a bunch of hidden folders that I need to show, including .yacoin... Anyway, I created the yacoin.conf file with added instructions as on www.yacoin.org, thanks for the link. Now I started it (?) with ./yacoind -daemon -gen -addnode=82.211.30.212 and it says: "YaCoin server starting", nothing more, nothing less. - I assume it will need to download the block chain? - How will I know if it is mining and how do I know when a block is found - I have not entered my YaCoin address anywhere, how would it know where to deposit it? (I have it running under windows, but I assume I have a separate wallet unde Ubuntu.) If it uses my address automatically, how do I access the Ubuntu wallet to see the balance and to transfer them? I.E: where is the client? Sorry for all the questions, but I assume I am not the only one. Many thanks.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 02:16:07 AM

Quote from: kalgecin on May 10, 2013, 01:52:57 AM Quote from: Neverest on May 10, 2013, 01:51:02 AM run sudo chown yourusername:yourusername * -R again. seems you misused sudo once (or several times) ;-) Hehe, I probably sudo'd myself to linux-hell. Anyway, chown-ed again, same result: me@ubuntu:~/yacoin/src$ make -f makefile.unix results in: ......................... boost_program_options -l boost_thread -l db_cxx -l ssl -l crypto -l miniupnpc -Wl,-Bdynamic -l z -l dl -l pthread /usr/bin/ld: cannot open output file yacoind: Permission denied collect2: ld returned 1 exit status make: *** [yacoind] Error 1 When trying with me@ubuntu:~/yacoin/src$ sudo chown me:me * -R me@ubuntu:~/yacoin/src$ sudo make -f makefile.unix I get /bin/sh ../share/genbuild.sh obj/build.h .............................. boost_program_options -l boost_thread -l db_cxx -l ssl -l crypto -l miniupnpc -Wl,-Bdynamic -l z -l dl -l pthread /usr/bin/ld: cannot find -lboost_filesystem /usr/bin/ld: cannot find -lboost_program_options /usr/bin/ld: cannot find -lboost_thread collect2: ld returned 1 exit status make: *** [yacoind] Error 1 This is getting annoying, appreciate your assistance. try sudo apt-get install libboost-all-dev That seems to have worked, as it finished without errors. Yacoin server started, Ubuntu won't let me make a yacoin.conf file in the Yacoin folder (I can make it outside). - How come I don't have the permissions and how do I get them? - WHat else (besides the random RPC user/pass) do I need to put in the .conf file? Thanks again!

Alternate cryptocurrencies / Altcoin Discussion / Re: YACoin - cpuminer released. Very soon pools will be availaible for this coin

on: May 10, 2013, 02:02:02 AM

Quote from: limitless on May 09, 2013, 02:56:47 PM So it's simple. If you're using linux, first make sure you have libcurl install, you can get this by installing Quote apt-get install libcurl-dev for ubuntu and debian users yum install curl-devel for the rest For compiling in linux, the steps are: Quote git clone https://github.com/ali1234/cpuminer cd cpuminer ./autogen.sh ./configure CFLAGS="-O3" make make install Then to run it, you need to have the daemon running. An example of ~/root/.yacoin/yacoin.conf: Quote rpcuser=randomuser rpcpassword=yourgivenpassword addnode=82.211.30.212 addnode=78.21.9.49 addnode=88.204.169.242 rpcallowip=127.0.0.1 rpcallowip=[any ip that will be mining on your server] rpcport=9323 port=7688 daemon=1 server=1 gen=0 To mine on the machine that has the daemon server running, simply type: Quote ./minerd -o http://yourdaemonmachine.com:9323 -u randomuser -p yourgivenpassword -a scrypt-jane Quote ./minerd -o http://127.0.0.1:9323 -u randomuser -p yourgivenpassword -a scrypt-jane Hopefully someone can add this together to make a complete Yacoin mining guide. I get stuck: "me@ubuntu:~$ sudo apt-get install libcurl-dev [sudo] password for me: Reading package lists... Done Building dependency tree Reading state information... Done Package libcurl-dev is a virtual package provided by: libcurl4-openssl-dev 7.22.0-3ubuntu4.1 libcurl4-nss-dev 7.22.0-3ubuntu4.1 libcurl4-gnutls-dev 7.22.0-3ubuntu4.1 You should explicitly select one to install. E: Package 'libcurl-dev' has no installation candidate" How do I explicitly select one? When ignoring and continuing I get: me@ubuntu:~$ git clone https://github.com/ali1234/cpuminer Cloning into 'cpuminer'... remote: Counting objects: 1136, done. remote: Compressing objects: 100% (676/676), done. remote: Total 1136 (delta 548), reused 1028 (delta 456) Receiving objects: 100% (1136/1136), 827.16 KiB \| 104 KiB/s, done. Resolving deltas: 100% (548/548), done. So that seems to work. Then: me@ubuntu:~$ cd cpuminer me@ubuntu:~/cpuminer$ ./autogen.sh ./autogen.sh: 8: ./autogen.sh: aclocal: not found me@ubuntu:~/cpuminer$ ./configure CFLAGS="-O3" bash: ./configure: No such file or directory Why? Next error: me@ubuntu:~/cpuminer$ make make: *** No targets specified and no makefile found. Stop. Running Ubunto on a VMware on Win 7 64bits. Any help appreciated!

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][YAC] yacoin: yet another altcoin. START is now.

on: May 10, 2013, 01:51:02 AM

Quote from: kalgecin on May 10, 2013, 01:45:37 AM Quote from: Neverest on May 10, 2013, 01:43:52 AM Quote from: kalgecin on May 10, 2013, 01:34:42 AM Quote from: Neverest on May 10, 2013, 01:32:15 AM Quote from: kalgecin on May 10, 2013, 01:29:34 AM Quote from: Neverest on May 10, 2013, 01:28:03 AM Thanks! I added: sudo apt-get install libssl-dev But now I get "make -f makefile.unix g++ -c -O2 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/home/me/yacoin/src -I/home/me/yacoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp alert.cpp:244:1: fatal error: opening dependency file obj/alert.d: Permission denied compilation terminated. make: *** [obj/alert.o] Error 1" Any tips. Sorry, but still Linux noob here, but learning fast. sudo chown yourusername:yourusername * -R Thanks. One step further: make -f makefile.unix /bin/sh ../share/genbuild.sh obj/build.h g++ -c -O2 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/home/harry/yacoin/src -I/home/me/yacoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/checkpoints.d -o obj/checkpoints.o checkpoints.cpp In file included from checkpoints.cpp:10:0: db.h:14:20: fatal error: db_cxx.h: No such file or directory What next? sudo apt-get install libdb++-dev Thanks a lot guys, much appreciated. It made a lot of stuff, but still got an error at the end: "/usr/bin/ld: cannot open output file yacoind: Permission denied collect2: ld returned 1 exit status make: *** [yacoind] Error 1 " I thought I already had all permissions needed? run sudo chown yourusername:yourusername * -R again. seems you misused sudo once (or several times) ;-) Hehe, I probably sudo'd myself to linux-hell. Anyway, chown-ed again, same result: me@ubuntu:~/yacoin/src$ make -f makefile.unix results in: ......................... boost_program_options -l boost_thread -l db_cxx -l ssl -l crypto -l miniupnpc -Wl,-Bdynamic -l z -l dl -l pthread /usr/bin/ld: cannot open output file yacoind: Permission denied collect2: ld returned 1 exit status make: *** [yacoind] Error 1 When trying with me@ubuntu:~/yacoin/src$ sudo chown me:me * -R me@ubuntu:~/yacoin/src$ sudo make -f makefile.unix I get /bin/sh ../share/genbuild.sh obj/build.h .............................. boost_program_options -l boost_thread -l db_cxx -l ssl -l crypto -l miniupnpc -Wl,-Bdynamic -l z -l dl -l pthread /usr/bin/ld: cannot find -lboost_filesystem /usr/bin/ld: cannot find -lboost_program_options /usr/bin/ld: cannot find -lboost_thread collect2: ld returned 1 exit status make: *** [yacoind] Error 1 This is getting annoying, appreciate your assistance.

Pages: [1] 2 3 4 5 6 7 8 »