change

-ewal 0x98364f098e2cd698e93c84bc25c4e37425dee027.salam1

to

-ewal 0x98364f098e2cd698e93c84bc25c4e37425dee027.$rigName

Thanks for the Hint.

on This Board i havent the possibility about gen1 and gen2.

have tested it also on a BIOSTAR TB85... Have 2 Splitters. i just got it to work 1 Time on the UD5 to detect 6 Cards. Stucked in OC, after that no more chance to get it up Also tryed all different Ports bla bla bla..... Funny thing is, i get different Errors

but i think the GA-990FXA is simply to old now for this fancy new things

I will ry it also on the Asrock Z97... perhaps it will work here.

But i will not fight till fix already have ordered 2 of the Z270 ^^ including 18 x RX 470

ANT EDIT: my Hashrate --> Claymore Dual with SIA, 5x XFX RX 470 Black Edition Elpida --> BIOS MOD

ETH - Total Speed: 135.225 Mh/s, Total Shares: 276, Rejected: 0, Time: 01:04
ETH: GPU0 27.850 Mh/s, GPU1 24.005 Mh/s, GPU2 27.930 Mh/s, GPU3 27.908 Mh/s, GPU4 27.533 Mh/s
SC - Total Speed: 1081.798 Mh/s, Total Shares: 247, Rejected: 3
SC: GPU0 222.798 Mh/s, GPU1 192.036 Mh/s, GPU2 223.439 Mh/s, GPU3 223.265 Mh/s, GPU4 220.260 Mh/s


Claymore Dual with SIA, 6x R9 290x Sapphire

ETH: 04/13/17-09:37:55 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 178.659 Mh/s, Total Shares: 354, Rejected: 0, Time: 01:10
ETH: GPU0 30.128 Mh/s, GPU1 30.134 Mh/s, GPU2 29.591 Mh/s, GPU3 29.603 Mh/s, GPU4 29.602 Mh/s, GPU5 29.601 Mh/s
SC - Total Speed: 1429.265 Mh/s, Total Shares: 355, Rejected: 0
SC: GPU0 241.027 Mh/s, GPU1 241.068 Mh/s, GPU2 236.729 Mh/s, GPU3 236.820 Mh/s, GPU4 236.816 Mh/s, GPU5 236.805 Mh/s


Claymore Dual with SIA, 3x HIS RX 470 Elpida BIOS MOD + 1x XFX RX 470 Black Edition Elpida BIOS MOD

ETH: 04/13/17-09:39:05 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 102.192 Mh/s, Total Shares: 2127, Rejected: 1, Time: 12:50
ETH: GPU0 23.102 Mh/s, GPU1 26.434 Mh/s, GPU2 24.687 Mh/s, GPU3 27.969 Mh/s
SC - Total Speed: 817.533 Mh/s, Total Shares: 3959, Rejected: 21
SC: GPU0 184.814 Mh/s, GPU1 211.471 Mh/s, GPU2 197.494 Mh/s, GPU3 223.754 Mh/s

HELL YEAH.

I try since days to get the 1 to 3 Splitter getting working. If i unplug all and just the splitter with 1 cardc is inside, ,im stucking in a Boot-Loop and it kills his selfe with Kernel Panic.

Doenst matter if RX or R version.

could you give me some hints / Tips?

Board: GA-990FXA UD5 rev. 3

Hey,

look @ your BIOS.

UEFI settings have to be changed to "LEGACY Only", Also AHCI and EHCI have to be enabled, and if you have the setting in your BIOS the IMMOU Emulator.

this fixed tthe issue on my side.

Since a view days 1 rack with rx 470 is making troubles.

Hangs in OpenCL Fall (always same GPU) after reboot it stuck offen in Boot cause a network-job is waiting. After 5:30 minute counter it boots up, but it cant Connecticut to the pool and is still offline in dashboard.

After fixingit with hardshutdown, wait 5 Minuten and changing lanport it boots AS usual.

But now there are New lines i never habe Seen. See picture below

Thanks man for sharing your experience in Detail. Helps alot for thoughts. Still have to wait for arriving.

In Summery we have to time 6x R9 290x & 10 RX 470 (Brand mixed for study. To time running in 3 boards. Want to decrease the need oft boards.

Wie are expecting the New awesome dashboard. Hope it gets released soon.

Guntis (owner of mineshop) told me he is running 9 cards per board under windows.

Linux support is unknown Form his side.

I habe 2 Gigabyte fx990 ud5 rev. 3. Just can run 5 cards, Windows and linux. Want per board 7 or 9 cards. Besteht case would be every port witha Splitter. So theoretical 15  cards.

you already know this article? https://bitcointalk.org/index.php?topic=64450.0

600 USD from his source, or near double - so 1200 USD directly by trentonsystems..... i think the starting invest just for a board is to high. for 100 USD each i get a 5 - 6 GPU supporting Board. so with 500 - 600 USD i will get 25 - 36 GPUS.

Just CPU and RAM you will save a little.

I have Ordered 4 of these: https://mineshop.eu/cables/pcie-adapter-1-to-3-slots-detail

still waiting for testing if they are supported by SMOS. I have already made my Rigs with a 1700 - 2000 Watt PSU system. so it would be great if these extenders would work. Unser Windows they are already running. but still dont know about linux support.

What miningsoftware are you using?


TRY:

Claymore-ETH 8.1 Custom

i dont know the pool now, but one hint i have:

set on Pool Worker same as Rig-Names on SMOS.

than:  -s pool.alpereum.ch:3001 -u 0x2e577Eb55514b083825cfF4Fa51db598621A1F8a.$rigName

Check Again the Config.txt on your flashed drive! it just can be a TYPO, or your router is blocking, but if you still connected to a pool..... the router isnt responsible for issue.

it should look like this:


keep care there is no space.

Welcome Community and SMOS enthusiasts.

1. GENIUS WORK!

2. Future-Dashboard
it looks Very nice indeed!!!!!!

is it imagined from you, that you can controll every single rack? so i have in my Dashboard rig001 rig002 rig002

rig001 = claymore zcash = wallet 1

rig002= silenarmy = wallet 2

rig003 = claymore zcash = wallet 2

with detailed stats? Cause this is what i would need.

I manage some Rigs of a Group of 5 People. So its hard tioll now with SMOS to do so, cause i must use 1 Miner and 1 Wallet... just can do different workes, but cant get the stats out how much work each rack have maded.


3. Back to Topic:

Update runs Fucking stable.

i Use XFX 470 4GB Black Edition.

After BIOS-Mod under Windows, and OC in SMOS, i reach 28.8 MH/S each card. havent looked till now on energy consuption, cause i havent to mind it

EDIT: started a new Rig with 3x HIS RX 470 OC and 1 x XFX RX470 Black Edition. Have to use different coreclock. HIS rx470 run stable at 28,4 MH/s

btw. All cards are Elpida Bios