 Show Posts
|
|
Pages: [1] 2 3 4 »
|
Hi, PC crashed while wallet was open and staking... After restart, the wallet was not starting, with fatal error msg (windows 10). I deleted all the files except wallet.dat and restarted the wallet-qt. It starts to sync, but after 1-2 minutes it stops. Here is what is shown in the db.log file wallet.dat has LSN 1/1337702, past end of log at 1/476
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
DB_ENV->log_flush: LSN of 1/1337702 past current end-of-log of 1/476
Database environment corrupt; the wrong log files may have been removed or incompatible database files imported from another environment
PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
wallet.dat: unable to flush page: 9
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
any idea how I can fix it? Regards |
|
|
|
hey guys similar error but i actually have the correct Ether wallet from myetherwallet site directly can someone help me out and let me know why it is not working I got nicehash working so not sure why this is not ill post my code and the error i get for you guys to see thanks
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32/ orc
THIS IS THE ERROR I GET _______________________________________________________________
This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-eu2.nanopool.org removed from the list
This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-east1.nanopool.org removed from the list
This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-west1.nanopool.org removed from the list
This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-asia1.nanopool.org removed from the list
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 4 pools are specified
Main Decred pool is pasc-eu2.nanopool.org:15555
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2
Total cards: 1
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Stratum - connecting to 'pasc-eu2.nanopool.org' <198.251.88.21> port 15555
DCR: Stratum - Connected (pasc-eu2.nanopool.org:15555)
DCR: Authorized
DCR: 10/18/17-16:18:03 - New job from pasc-eu2.nanopool.org:15555
DCR: 10/18/17-16:18:07 - New job from pasc-eu2.nanopool.org:15555
DCR: 10/18/17-16:18:09 - New job from pasc-eu2.nanopool.org:15555
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=73C fan=70%
Correct format: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32.YOURWORKER -epsw x |
|
|
|
|
The X is a mark that an ASIC chip on that PCB board is dead/faulty/not_responding.
Each row is a PCB board, and the O/X is the ASIC chip status
|
|
|
|
|
Hi,
It seems that my wallet is stuck at "creating wallet... processing blocks... Height #0"
No files have been created in appdata sumo dir...
any ideas?
|
|
|
|
|
Still cheaper than the wire transfer fee.
You can use the chat on the site to get more info on rates. Maybe the fee is for credit cards and not debit cards.
|
|
|
|
Hi, The easiest way is to use https://spectrocoin.com/en/signup.html?referralId=2508987656You can link your debit/credit card and deposit GBP, USD, EUR. I think that you are not chatged any fees since it apears as a POS buy. Then convert it to BTC using their exhange at current rates. You can also get a cash card from them to use it for purchases/payments using bitcoins. |
|
|
|
Hello Bitcoin Forum!
i got issues with my mining rig.
my system:
ASROCK FM2A78M PRO3+
AMD A6 6400K Dual-Core Processor
Platimax 80PLUS 1350
8GB DDR3
so i got 3 GPU“s
first one is a R9380 STRIX . works all fine on solo mining
the another 2 are R9390 WINDFORCE if i try to solo mine with them they work for 5-15 min after them i got a blackscreen and can only restart the system...
if i dual mine its the same issue with the blackscreen
what i try to fix the problem.
15.12 driver - failed
newest driver failed
riser changed - failed
another psu - failed
more virtuall RAM - failed
if i underclock the r9390 windforce and set the setting from the miner after 100 to 80% it works longer but again with blackscreen...
what i can do..
i set already the underclock on Mem clock 950 and gpu clock to 700 and again the issue..
i changed the power limit from the power limit (%) to +50 .. again blackscreen its wayne if i give him -50 +50 or 0 ...
i dont know what to do guys please support me ... i only want that this thing work.. i dont want the 390 sols if i can only 200 is enoguh.. only should to work one day without blackscreen...
another info.
but if i try on a another PC to play games with the r9390 windforce it works fine..
i played 5 games overwatch and no lag no blackscreen..
sorry for my bad english !
and all things in your mind are here welcome
1. Check the power settings in windows and make sure the system is not going to "sleep mode" after X minutes. (Set it to ALWAYS ON 2. Have you enabled the 4G decoding in bios? If yes, make sure you have the latest AMD drivers installed |
|
|
|
|
Hi,
yes, delete the folder "database" and then re-open the wallet and let it sync
|
|
|
|
|
Hi
Just delete the blockchain database and reopen the wallet to re-sync.
Don't delete the .dat file!!! This is your wallet!
|
|
|
|
|
If I remember correctly, you can get the manual at bitmains support page
|
|
|
|
|
As far as I know, the data are stored encrypted, into multiple peers (20 or more) in chuncks.
So hacking one node will get you useless encrypted data.
|
|
|
|
I was wondering if I could use my gaming PC to mine either ETH or ETC.
Could anyone help me with an estimate of how much of each I could mine per week/month/etc?
Would I be able to use the PC at all while it is mining?
Thanks
For profit calculator (estimated) try one of the following (or both): https://www.nicehash.com/?p=calchttps://whattomine.com/You can use your PC while it is mining (for light stuff like browse the web, read e-mails, etc) but you cannot play games (since the GPU is used at 100% for mining) |
|
|
|
I'd reinstall ethos, creat a brand new account for your config or just use config maker. Change ethos ssh and root passwords.
Yes Sir . Maybe I can try this. Done with SSH and root passwords changing. The safest way is to reinstall everything, set it up with new passwords, and make sure not needed ports are close on the machine (not familiar with EthOS but I guess it is a Linux). If the machine is already infected with some kind of trojan horse, then changing the passwords won't help you... format and re-install everything from scratch, and never use same passwords again (or similar ones) |
|
|
|
Thank for the reply.
Yes six risers. All powered by by main PSU. Risers attached to motherboard thorough 1x PCIE which came along with the riser. its the blue USB cable connecting. Connections are okay because 3 are working and hashing.
Hi, The riser of each card needs to be powered with the same PSU as the card. example: PSU1: motherboards, CPU, HDD, risers 1,2,3 and the GPUs 1,2,3 (sitting on risers 1,2,3) PSU2: risers 4,5,6 and GPU's 4,5,6 (connected to risers 4,5,6) DO NOT mix risers and GPU's on different PSUs! Also if you are powering up the 2nd PSU manually, make sure it is powered up 1st! and then power the motherboard! |
|
|
|
received my PI. Nice that's mean dev still here even if we don't hear nothing from him!
Hope the best for PI! need just some updates! and WOOOW!
How does the drop work? I did the signature campaign but nowhere did i have to put my wallet adres You send a PM to the dev with your forum rank and address for the airdrop |
|
|
|
I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..
I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out.
C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x
╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5 ║
╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444
Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...
AMD Cards available: 1
GPU #0: Fiji, 4096 MB available, 64 compute units
GPU #0 recognized as Fury X/Nano
POOL/SOLO version
GPU #0: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
ETH: Stratum - Connected (us1.ethermine.org:4444)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETH: Stratum - Connected (us1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
If i leave it running, it will just keep rejecting shares.. What do I do here?
Hi, fix your wallet address in the .bat file!!! replace 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 with 0x8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 (note the 0x in front) |
|
|
|
Hello what to mine through the CPU, what will have a sence. Is some coin which is designed to be not effective not only on the ASIC as is Ethereum, but also on the GPU? Something what is tradeable and exist Android local Wallet app for it? Without it its little usefull for me as currency. What about DigitalNote (XDN) or anything? I just wanna use my spare desktop(Ubuntu) /Android/VPS(FreeBSD) time for anything usefull  . Any idea to have fun and have possible sence for future? Edit: What about Monero? Go to https://minergate.com/Create account (free) and download the MinerGate software. It will mine the most profitable coin (at the moment) with your CPU and GPU Same goes with NiceHash miner software https://www.nicehash.com/?p=nhmintro, but not that many options there. Difference is that with Minergate you get the coins that you mine (BCN,XMR,ETH,etc etc), and with nicehash you are getting bitcoins for the coins that you mine. |
|
|
|
Hey guys, first time posting and just trying to get into the whole mining thing.
I have a strix rx 480 8G doing about 24mhs for ethereum and 700mhs for sia using claymore.
I keep reading of people getting at least 28 mhs by flashing with copying the 1750 strap to 2000. I've tried this but it made no difference for me, I've been playing with mem and core frequency. I can't get higher than 24 for ethereum and 720 for sia. It only goes down with different settings.
I've also been messing with the -i command for claymore and that too doesn't get me past 24mhs.
Any help would be appreciated.
Thank you!
As I have stated in other hashrate tweaking posts... When you are trying to get the best out of your card and see how fast it can mine, you don't use dual mining. You have to test the card with ETH only and see the maximum hashrate it can get (with bios mod, and core speed-voltage, memory speed etc) Once you are satisfied with the results, then you jump into dual mining. The ETH-SIA combination is dropping the ETH hashrate a lot. If you try ETH-DCR you will see higher ETH speeds. Again... tweak,mod,push your card using 1 coin only (ETH for your card) and when you are happy, switch to whatever dual combination you are happy with. |
|
|
|
Hi, Go to http://www.whattomine.comselect the number of 1080 cards you have (if you have multiple) type in the price of your electricity per kwh (kilowatt hour) Hit calculate... check the results! |
|
|
|
|
