 Show Posts
|
|
Pages: « 1 2 [3] 4 »
|
|
Hi All
I use Multibit as my main storage for BTC, i always backup the files as required when i add another encrypted wallet when i reach reach a set amount of coins.
What have NEVER done is run Multibit on another new laptop and recovered my wallets using the saved details.
My thinking is having multibit running on a second pc will give me instant access if my main pc is faulty.
So i willl be basically setting it up on a second pc if possible.
Can this be done and if so how, i always save EVERY backup file .
Thanks
|
|
|
|
|
Hi
I had 1Th Dragon miner and the PSU was faulty on it soi purchased a 1300w EVGA Gold PSU to replce it.
My 9 other miners all run at 1Th CONSTANTLY except for this one ??
Could it be because i have used the wrong PCI outlets (has 6)?
If goto the miners address and then into 'Real Time Monitoring' of the machine it is a constantly over 1 Th (over 256Gh per blade) ?
Any ideas what is going on here, difficulty is set to 256k.
Thanks
|
|
|
|
Hi All I have around 10 BTC in one encrypted wallet and want to back it up and open another encrypted wallet and send my coins to the new one. Is it just a case using the 'Export private Keys'  I can not see ANYwhere an option to 'back up your wallet' ?? I plan to back it up to the PC i am using plus couple of memory sticks each timei hit 10 BTC. ALso when i create a new wallet will it create a new BTC address ?? Cheers |
|
|
|
Hi All For some reason CEX.IO had stopeed doing auto withdrawals so i just done a manual withrawal to my Multibit Wallet, i just watched the ransfer being confirmed and BUT my balance has not increased I have reset the Blockchain etc ?? Whats happened here, it shows in Blockcahin also Anyone Cheers |
|
|
|
|
Hi All
The miners show on GHASH.IO although the speeds are WAY down on the LCD display and the couple that i can connect to.
Why can i not connect to some ?? I have in the past ??
I have also scanned with Angry IP Scanner and they show there ??
Anyone help please???
Thanks
|
|
|
|
|
Hi All
In the instructions for these miners its states that they need to be on a 192.168.1.XXX which is mine on my router BUT my friend Virgin Superhub is 192.168.0.1.
I played with the router settings for HOURS and could get it to see the Miner on 192.168.1.XXX BUT it would not mine/connect to pool.
Could i just not change the IP address of the miner on my router to 192.168.0.XXX and then take it to my friends house ?
Would this be OK ??
Thanks
|
|
|
|
Hi All I was purchasing a small item of a seller on here and was using his Skype/his skype name,SOMEHOWthat name had changed slighlty and i was dealing with wrong person (i did not know). I sent him 0.6 BTC and he kept sending me .pdf.scr receipts which i could not open When i right cicked it,showed as adobe pdf file it only had RUN so i did this. I have now lost over 5 BTC and have just watched another transaction being taken out as soon as its deposited..... This is from a 14 digit aplha numeric password created by Norton password craetor .. What do i do know,i have changed the password again on wallet but still do not feel safe !!!!! HELP PLEASE !!!!  |
|
|
|
Hi All I am aware that these need the third number to be 1 eg 192.168. 1.101 ...... I have a Virgin superhub router which is linked which default address is 192.168. 0.1. I have the EXACT miners address - 192.168.1.181 BUT it will NOT connect to it.... So i then changed the Virgin superhub address to 192.168.1.101 I could then connect to the miner and add the pool details as usual and the blades stopped flashing and it' s displayed running BUT i still get NO SPEED displayed Plus it does not show on the pool??? I have just taken the miner WITHOUT altering anything to a makes house with the old type Virgin Router, which is connected to a Liksys router with local ip addy of 192.168.1.1. Withing 1 minute its at 1Th. Anyone helpas i need this running on Virgin superhub, with a ethernet port connected to it... Thanks |
|
|
|
Hi Just assigned a miner to above pool, it shows in the BTC tab BUT in FAQ is says to alter above i have to goto please go to the account preferences of GHash.IO in the top right corner and scroll down to the “Shareholders” section. You can add bitcoin wallets as shareholders. I have no options ANy help Thansk |
|
|
|
|
Hi All
Have two miners, and both had broke variable fans and one unit even had the blades comes loose as they had used the wrong size scres to secure the blade to the case (they used the smaller case cover screws !!).
Both the fans were the variable speed ones, so i first replaced them BUT still no green led or any power light on Raspberry Pi unit ?
I checked the pi units by powering via a micro usb 5v/Ethernet cable and they powered up fine and i could connect to them via ip address.
My only option then is that it MUST be the main PCB, i have been sent two of these and STILLhave no green led with EVERYTHING connected as it should -no greeen leds on blades, both fans running, no power to pi unit ??
Anyone got any ideas what is going on here, the blades are connected as standard to the correct ports on the main board ?
What conditions need to be made to get the green led ?
Cheers
|
|
|
|
|
Hi
I have a 1 Th machine and anothe two unit son their way, so will be 3Th in total.
What pool should i use as primary ??
BTC Guild or Elgius ??
Also what about the third back up pool ??
Cheers
|
|
|
|
|
Hi All
Just had delivery of this and and i have connected to the ip addy displayed on the lcd panel, i have also changed the ip addy addy as it will conflict with other items on my network.
I have also joined BTC Guild
and have put in the -
POOL 1 ADD - eu-stratum.btcguild.com:3333
POOL 1 LOGIN - worker username
POOL 1PASSWORD - 123
How do i save these settings ?
Cheers
|
|
|
|
|
Hi All
Got all my coins just sitting in my Cryptsy account and want to move them to somewhere secure.
Like the look of Coinbase after researching.
Anyone recommend or comment on this ??
Thanks
|
|
|
|
Hi All Looking to but my first ASIC miner and the array of goods out there is unreal !!!! I have been mining scrypt for months and want a neater/clean, less heat more reliable Asic set-up, that i can easily expand on. China is full of Antminers, Avalons, Bitmains and Bitmines I like the look of the KNC @ 740-760 Gh. Anyone recommend anything out there, even pre-orders within 2 months I want to be in the 2-3 Th range to start. Anyone advise. Thansk I have plenty of BTC to fund my next project. (plus loads of other Crypto's !!!!..lol) Thanks |
|
|
|
Hi All I have an MSI Mb and x2 280x cards and it's only using a 550w max . I am not concerned about the efficiency as i have free electric in work  The biggest factor is price. Is there a formula or % to add to the 550w being used ?? Or do you subtract a figure from the PSU rating ?? I am also based in the UK Thanks |
|
|
|
|
Hi All
Just wondering if people who use x2 PSU's (one for MB/GPU's) and the other ONLY for the 12v to power GPU's ONLY (on cut powered risers)
Do you bother grounding both supply together ??
I switch coth mine on/off via a Dual PSU 24-Pin Adapter Cable
Cheers
|
|
|
|
|
Hi All
I am looking for a new Motherboard to support x6 GPU's.
Can anyone recommend one ??
I will be running windows 7 and appropriate version of catalyst drivers.
thanks
|
|
|
|
|
