规范：
PoW/PoS脚本
Blocktime：约60s

支付利息最少耗时：区块小于10000——1小时
支付利息最少耗时：区块大于10000——4小时
支付利息最多耗时：30天
开发难度：随每个区块变化
确认已开发区块：每20个区块之后
确认交易：每10个区块之后

隐身地址
加密信息

工作证明PoW描述：
第30个区块之前——开发基金/社区公益金—总计4万个SpaceCoin
第5030个区块之前——每个区块128个SpaceCoin，最多奖励640000个SpaceCoin——根据PoS分配，实际数量可能会少于此数值
第10030个区块之前——每个区块64个SpaceCoin，最多奖励320000个SpaceCoin——根据PoS分配，实际数量可能会少于此数值
第15030个区块之前——每个区块32个SpaceCoin，最多奖励160000个SpaceCoin——根据PoS分配，实际数量可能会少于此数值
第15030个区块之后——第一年16个SpaceCoin——之后每年递减50%

SPACECOIN运营路线图



股权证明PoS描述：
第1个区块之后——第一年32个SpaceCoin——每年递减50%

区块探测器网址：http://space.midnightminer.net/

SpaceCoin官网：http://spacecoin.info

矿池—午夜矿工网址：http://pool.midnightminer.net/
GC矿池网址：http://space.gcpool.eu

节点地址（示例）：
addnode=45.63.7.91
addnode=104.238.190.239
addnode=104.238.189.224
addnode=45.63.6.221
addnode=45.32.235.94
addnode=45.32.237.76
addnode=45.32.236.134
addnode=76.180.184.252:9172
addnode=107.130.201.180
addnode=84.200.32.199
addnode=85.175.216.200:9172
addnode=68.235.184.192:9172
addnode=174.53.172.58:9172
addnode=space1.midnightminer.net
addnode=space2.midnightminer.net
addnode=198.74.56.141
addnode=217.190.175.113
addnode=24.131.128.87
addnode=80.101.81.37
addnode=177.228.13.239
addnode=24.200.66.3
addnode=78.70.227.24
addnode=84.200.32.199

货币交易代号：SPACE

已挂钩的交易平台网址：
https://yobit.net/en/trade/SPACE/BTC#6M
Novacoin.com - https://novaexchange.com/market/BTC_SPACE/
Cryptopia.co.nz - https://www.cryptopia.co.nz

WindowsPC
端钱包下载地址：http://spacecoin.info/download/

Linux——源代码编译：
https://github.com/midnight-miner/spacecoin

下载bootstrap更新的网址：
http://crypt.midnightminer.net/bootstraps/space/bootstrap-20160727.zip

使用引导程序bootstrap快速入门：
解压缩文件：路径 %appdata%\SpaceCoin directory (Windoze) ，（可能需要重启钱包），钱包软件会加载数据

源代码托管服务Github网址：https://github.com/midnight-miner/spacecoin

Specs

Scrypt PoW/PoS
Blocktime : ~60 Seconds

Min. stake age : Block <10000 - 1 hour
Min. stake age : Block 10000> - 4 hours
Max. stake age : 30 days
Diff. retarget : Every block
Mined block confirms after : 20 blocks
Transactions confirm after : 10 blocks

Stealth Addresses
Encrypted Messages

PoW

Block <30 ----Development Funds / Community Chest - 40K SPACE TOTAL
Block <5030 ---- 128 SPACE - Max 640000 SPACE - Probably less due to POS
Block <10030 ---- 64 SPACE - Max 320000 SPACE - Probably less due to POS
Block <15030 ---- 32 SPACE - Max 160000 SPACE - Probably less due to POS
Block 15030> ---- 16 SPACE - Reward halves every year from this point



PoS

Block 1> ---- 32 SPACE - Reward halves every year

Block Explorer - http://space.midnightminer.net/

Website - http://spacecoin.info

Pools - Midnight Miner - http://pool.midnightminer.net/
        GCPOOL - http://space.gcpool.eu

Nodes - addnode=45.63.7.91
           addnode=104.238.190.239
           addnode=104.238.189.224
           addnode=45.63.6.221
           addnode=45.32.235.94
           addnode=45.32.237.76
           addnode=45.32.236.134
           addnode=76.180.184.252:9172
           addnode=107.130.201.180
           addnode=84.200.32.199
           addnode=85.175.216.200:9172
           addnode=68.235.184.192:9172
           addnode=174.53.172.58:9172
           addnode=space1.midnightminer.net
           addnode=space2.midnightminer.net
           addnode=198.74.56.141
           addnode=217.190.175.113
           addnode=24.131.128.87
           addnode=80.101.81.37
           addnode=177.228.13.239
           addnode=24.200.66.3
           addnode=78.70.227.24
           addnode=84.200.32.199

Coin Acronym: SPACE

Exchanges - Yobit.net - https://yobit.net/en/trade/SPACE/BTC#6M
                  AltMarkets - https://altmarkets.cc/market/BTC-SPACE

Windows Wallet - http://spacecoin.info/download/
                      - https://mega.nz/#!5mxA3RwB!mp0W1M4guG_1V75nc71nt3tjIcm4Q2nLkiBlJg9lNbA

Linux - compile from source https://github.com/midnight-miner/spacecoin

Up to date bootstrap.dat: http://crypt.midnightminer.net/bootstraps/space/bootstrap-20160727.zip

Quick instruction on how to your a bootstrap.dat for those that do not know:

Unzip file into your %appdata%\SpaceCoin directory (Windoze) or ~/.spacecoin  (linux) and start (or restart the wallet) the wallet will load the blockchain data from the bootstrap.dat file.

Github  URL - https://github.com/midnight-miner/spacecoin

I bought a cheep powered usb hub on ebay and it looks like it isnt going to work. Can anyone recommend a good powered usb hub for use with 3 gridseed blade units? So at least 7 ports.

I am guessing it is about the power supply output?

New to script mining and am having a problem setting up a gridseed blade miner under windows 7.

Installed the cables, and when usb plugs from miner are plugged in windows loads the 2 device drivers for each blade nicely "STM32 Virtual COM Port".

I then run cgminer or bfgminer ,  it does not recognize the miner blades "No devices detected!"

Is there something I am missing?

I am new to script mining and am have a problem setting up.

I have a windows 7 computer running cgminer.
I have a gridseed blade miner hooked up with the 2 usb cables and power supply's.

When I plunged in each blade windows recognized it and installed the drivers for each card.
When I run cgminer on start I get "no devices detected".

What do I need to do to get the mining software to recognize the blades?

I am running a antminer s1 and It looks like I am finally connected mining lite coin.
Looks like everything is getting rejected. Is this normal when first starting to mine with a new account?

FoundBlocks 2

Getworks 146

Accepted 0

Rejected 212

I am running a antminer s1 and am having a problem getting the mining link for f2pool.com to start mining.

I am using my worker name and stratum+tcp://stratum.f2pool.com:3333 for the location.

Doesn't say anywhere what the password should be. Leave blank?

Or does it take a while to get up and running after connected?

I have a account at miltipool and was just wondering if I can send all the different types of coins that I have mined to my bitcoin wallet or is multibit just for bitcoins?
If not is there a wallet someone can recommend?

I am fairly new to this and am just getting setup.

I am running 3 - antminer s1's right now hooked to Ethernet and have them mining with the interface that is internal to the antminer.

I am mining at Antpool, bitcoin.cz and multipool and use the interface at those sites for info and stats

Do I still need to run bitcoin mining software like cgminer, bfgminer or easy miner?
Is it more efficient to run the software on my local pc?
If so what software is best for these miners?