|
hope its not a flop, like many ICO.
|
|
|
|
Why are you trying to connect to a wallet. You can't do it with out a proxy server. Better off mining on a pool. with a2 terminator I do it quietly .... what changes with this ?? could you please explain me? I thank you in advance why u need to mine solo? go over to the pool. There are many. From the pool, transfer to your personal wallet. Easy. Do not complicate the process. Doesn't mean if its working with A4, must work with L3+ MINE WITH A POOL. Period. |
|
|
|
So the order of my L3+'s that I was able to get from the mid-October batch was just today marked as "Expired" as it's been 7 days since they released it, even though I sent the wire transfer on the 28th, and uploaded proof the same day. They're going to change the status of my order back to Valid once they receive the transfer today or tomorrow, correct? If my order was just sold with that last small batch they released that was supposed to be unpaid orders... because my transfer didn't go through in time... I'm going to be pissed.
Don't worry, this happens to us every time we do wire transfers and Bitmain always works it out (with the help of a support ticket occasionally). You won't get bumped, but I'd recommend submitting a support ticket now rather than later just to be safe. These past few days haven't been business days, but my order is still unpaid and expired on their website. I received a letter from my bank two days ago saying the wire transfer was debited to their accoount, so they 100% have my money. Even though my order is unpaid and expired, I was able to upload proof of the transfer before it changed to expired, so that should help. I suppose they just haven't gotten to my support ticket yet which I submitted on the 28th when I initiated the transfer, and another ticket with more proof when the transfer was debited. I don't like not knowing what is happening with this large of a sum of my money. you will get your order sorted, they are slow now. imagine having 100K Wire orders to sort out every month. That will takes time. i was lucky, Bella was slow but helpful. |
|
|
|
|
i cannot see any difference between this new release and previous release.
Same hashrate, but stability is the issue with new version. previous version can run up to 400 hours before i reset the rig.
|
|
|
|
|
Even November batch can bring you at least 50$ per day.
I'm using iBelink 11G, currently making about 110US$/day. In next 3 weeks, it will be lesser for sure. However, if DASH fired up to $500, that will be about the same.
October Batch:
1599+115+29+Tax (assume its 15%) = $2005/100 = 20 days for break-even and next 1 day u pay for electricity, and next few days are pure profit.
This assume u mine DASH. There are few more good coins that u can mine...
|
|
|
|
It seems like everyone I talk to has had a D3 order and not paid. I'm optimistic that it's a trend across all of these batches and that difficulty won't be as crazy as predicted.
the difficulty, currently fluctuate between 1.7m to 2,11m, depending on the hour of the day. Not everyone are mining 24 hours, it seems. i'm on Ibelink, currently mining. https://bitinfocharts.com/comparison/dash-difficulty.html#3m |
|
|
|
why are u not getting the one from Bitmain? |
|
|
|
Something wrong with the network? My pc wallet only says out of sync and the bar is not moving saying 1015 blocks remaining. Are others experiencing the same thing?
no issues over here. check back your config file for nodes or check your internet connectivity. suggest u get amazon VPS to park your wallet there. I have never used Amazon VPS to park my wallet. How do you go about doing this? Is it very secure? Is this the method a lot people use when they have a lot wallets that stake coins? u can have both, one on VPS and one on your laptop. I have millions, so i stake on VPS. I'm using Windows Server 2012 |
|
|
|
Something wrong with the network? My pc wallet only says out of sync and the bar is not moving saying 1015 blocks remaining. Are others experiencing the same thing?
no issues over here. check back your config file for nodes or check your internet connectivity. suggest u get amazon VPS to park your wallet there. |
|
|
|
Guys I have a questions related to all the antminers.
I know they are loud, but are they "put it in a room close the door and youŽll be fine" loud, "you have to put it in the basement and you wonŽt notice them" loud, or are they
"will fuck up the whole neighbourhood" loud?
the main problem is not the noise but the heat coming from these things. when I test my miner over night, the walls heated up to around 40°C. these things easily blow 65-70°C out. And they move a lot of air. You should think about the cooling. Even 1 machine will heat up a basement within a day which miner u tested? Cannot be D3. Ibelink 11 is having 5 fans, each fan is over 5000 RPM. Its VERY loud and hot, but under full conditioning room, the temp never exceeds 32 deg Celsius. And the wall and floor is cold. I'm in Equator, so humidity and heat is a big challenge. Cannot be your walls heating up to 40deg C |
|
|
|
|
allows 14 altcoins to be used to reward posts on Facebook in a very real sense, rather than merely giving them the standard 'like'.
The full list reads:
dogecoin,
digibytes,
einsteinium,
fedoracoin,
mintcoin,
reddcoin,
quark,
worldcoin,
vertcoin,
karmacoin,
earthcoin,
trollcoin,
HTMLcoin and donationcoin.
|
|
|
|
Hi everybody, I still looking for the best DASH-pool to connect my incomming D3's.  Is there a top-pool list based on blockchain? So what pools won this much blocks in 24 hrs, 1 wk, or 1 month, etc, Cheerz, Wieme u need to test few pool to finds out which one generates better income. do not listen to retards, they are few here, saying xxx pool is better than yyyy pool and discredit other people's experiences and feedback. Really childish. u can start with official pool listed on DASH webpage |
|
|
|
like i said, i have bad experience of no blocks, check your eyes. That is my experience. Do you have yours? Merely cut and paste an URL doesn't validate my point. |
|
|
|
|
BUMP...
any more sellers?
|
|
|
|
Well, with D3 first batch still awaiting to be shipped, my Ibelink DM11g performance in real world is rather unpleasant.
The calculator is off by 40%.
POOL
stratum+tcp://dash80.suprnova.cc:443
Run for 24 hours
Earnings Audit (SUM(Debits) + TXFee + Donation + Balance)
0.22311787
Average Hashrate = 8,500MH/s
Average Earning per hour = 0.00929
Difficulty: 995,480.12
Pool Hashrate: 1,746,797.90 MH/s
We'd love to see a comparison for a different pool! Stick it on another pool and also nicehash please just to give us a bearing.  yes, will try on other pool. According to Dash Forum, u need to run at least 48hours to gauge the performance. I have another A900 running on Zpool.ca. The earning is low as usual, something is SERIOUSLY off about Zpool.ca Miner config panel shows constant 917Mh/s. Zpool detects lower. Seriously lower, mind you this i can claim after running more than 48 hours. Summary Miners Shares Hashrate* Reject* x11 5 0.3066% 645 MH/s 2.3% |
|
|
|
Well, with D3 first batch still awaiting to be shipped, my Ibelink DM11g performance in real world is rather unpleasant.
The calculator is off by 40%.
POOL
stratum+tcp://dash80.suprnova.cc:443
Run for 24 hours
Earnings Audit (SUM(Debits) + TXFee + Donation + Balance)
0.22311787
Average Hashrate = 8,500MH/s
Average Earning per hour = 0.00929
Difficulty: 995,480.12
Pool Hashrate: 1,746,797.90 MH/s
Hum 20% them perf prediction ... What the fuck, do u run this at hot temp ? The hashrate depends, it can goes up and down but on the miner page, the average is 10K. Running it cold, not hot. But what important is the stats of the pool, not your unit. |
|
|
|
|
no responses to PM requests.
this developer is not keen on taking new business, he's gone.
|
|
|
|
|
Well, with D3 first batch still awaiting to be shipped, my Ibelink DM11g performance in real world is rather unpleasant.
The calculator is off by 40%.
POOL
stratum+tcp://dash80.suprnova.cc:443
Run for 24 hours
Earnings Audit (SUM(Debits) + TXFee + Donation + Balance)
0.22311787
Average Hashrate = 8,500MH/s
Average Earning per hour = 0.00929
Difficulty: 995,480.12
Pool Hashrate: 1,746,797.90 MH/s
|
|
|
|
my pool group buy of Ibelink D11 confirming that they will received their unit by 30th August 2017.
one of them is selling to me for $8000, ready stock when he gets it by month end.
still thinking if that is a good buy until i get my unit in mid OCTOBER
Well that would give you a 2 weeks jump start on the D3's. You could probably realistically get 4k back in the first month, and then it will decline pretty quickly from there, but probably could still ROI in 90 days. So probably still doable if you decided to grab it. Only thing I would mention is the DM11G appears to be very temperature sensitive so you will want to make sure you have it in a climate controlled environment. interesting, that's quite a good number. I can confirm that the IBELINK is coming this weekend. Nice. is ZPool better than supernova for DASH/x11 mining? If your curious how the returns are for iBelink 11G I have it running on my pool and you can see the stats here: http://www.zpool.ca/?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRHThe downtimes are from me turning it off as the wife hates the noise when we're watching TV. It is way noisier than the Baikal giants but of course they are only 900mh I'll post the addresses for the D3's I have coming in Sept when I get them online WOW, Thanks Crackfoo for sharing your data on the DM11G. What would you say is your average daily earnings as of lately? I see it looked like your last payment was like $69? Is that your norm right now? for a 24h period it would be about ~$110-120 CAD |
|
|
|
|
Show Posts
