 Show Posts
|
|
Pages: [1]
|
Thank you guys for advice.
I actually changed my plan. I am thinking about not using risers, so I will just plug in my gtx 770 and two gtx 1050s directly into my motherboard.
My only concern now is that I cannot supply gtx 1050 with power from my psu 6/8 pin connectors. Will my motherboard be able to provide the x2 75W (150W total) via the x16 pcie slots for my two gtx 1050s ?
what motherboard do you have? |
|
|
|
Hello,
i started mining argo today,
Im mining with 1070 and temperature increased . its 72-74 degree.
core +150. memory +200. fan speed 75.
any better idea?
Poor Nvidias... Make core +300 and memory +500 - Let them die with dignity! nvidea dying in hell heat... is it memory or core algo? can't force both |
|
|
|
|
how to create new address for mining? i have receive and no create new address button
|
|
|
|
|
where I have to copy nodes to start syncing wallet?
|
|
|
|
I think your psu will not handle 2x gtx 1080ti, but i think it can handle 2x gtx1070ti.
And my guess this gpu will be your best bet. imho.
Thank you. That's a helpful start. Would it make sense to upgrade my PSU to be able to support 2 1080ti? Which manufacturer would you recommend? There are many different 1070ti. I am partial to the 3 fan look, but really am not that knowledgeable about parts overall. Two 1080ti (Asus Strix 3 fans) consumes 600W (one is 300W) at max overload + rest of the PC (150W) = you need at least 850W PSU (recomended 1000W) Two 1070ti (Palit SuperJet stream) consumes 360W (one si 180W) al max overload + rest of the PC (150W) = you need at least 650W PSU (recomended 850W) Corsair is always best choice, some series have 5, some 7 years warranty. I prefer RM1000x (i have them on all my rigs, some rigs with one and some with two) |
|
|
|
Hey people! Is there any possibility of audible warning using the web browser monitoring?
Download Minerstat app for your phone, every time your miner is offline (not working), you will get notification on your phone. If you have google account on your pc you will also get notification (sound) on your desktop. |
|
|
|
|
this algo uses core clock or memory clock?
|
|
|
|
GPU stops every few minutes and then starts again...
If it stops, does it start on its own or you have to manually restart it? have you tried to check or replace your risers? in most cases those are the culprits Can you tell me what settings on GPU do you use for this combination?
I use, Default Voltage cClock: 1100 MemClock: 2050 power Limit: -20 Yes, on 3 out of 5 GPUs fans stops for second or two and then restarts. On miner window I see one "line" saying hash rade is 0, in the next one there it gets back again to normal. Happens every few minutes. Risers are not the problem, this don't happens on other algoritams. I think it has to be software error od GPU settings I tryed few claymore versions, same error. Can you send me your config file (exclude your personal files) so i can compare? Did I miss something? epool eu1.ethermine.org:4444
-ewal ETH adress
-dpool dcr-eu.coinmine.pl:2222
-dwal user.user
-dpsw password
-dcoin dcr
-epsw x
-mode 0
-allcoins 1
-nofee 0
-mport -3333 ** I use Minerstat ** I don't do dual mining, I embedded my configuration thru my bat file. setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool MY_POOL:PORT -ewal MY_WALLET -epsw x -esm 3 -allpools 1 setx comands? Isn't that from ETHMINER, not claymore?
I think you may have an issue with you PSU : mining ETH draws more power than other crypto, like MNR
What kind of PSU do you have ?
Corsair RM1000X, 900W consumption (tracing with device just for that), I will try lowering my GPU settings to really low values and then see. I mined ETH-DCR before summer in May/June and all was great. I didn't track every detail that changed in Claymore since then, but now I have lot less H/s and that wierd errors. |
|
|
|
GPU stops every few minutes and then starts again...
If it stops, does it start on its own or you have to manually restart it? have you tried to check or replace your risers? in most cases those are the culprits Can you tell me what settings on GPU do you use for this combination?
I use, Default Voltage cClock: 1100 MemClock: 2050 power Limit: -20 Yes, on 3 out of 5 GPUs fans stops for second or two and then restarts. On miner window I see one "line" saying hash rade is 0, in the next one there it gets back again to normal. Happens every few minutes. Risers are not the problem, this don't happens on other algoritams. I think it has to be software error od GPU settings I tryed few claymore versions, same error. Can you send me your config file (exclude your personal files) so i can compare? Did I miss something? epool eu1.ethermine.org:4444
-ewal ETH adress
-dpool dcr-eu.coinmine.pl:2222
-dwal user.user
-dpsw password
-dcoin dcr
-epsw x
-mode 0
-allcoins 1
-nofee 0
-mport -3333 ** I use Minerstat ** |
|
|
|
|
I have 5x RX480 (Saphhire Nitro +) with Blockchain drivers and custom BIOS. I'm limited to 1000W power. I'm currently mining ETH + LBRY but I have some wierd errors. GPU stops every few minutes and then starts again... I tryed lowering dcri but no help.
Now my settings are:
Clock: 1050
Voltage: 950
Memory: 2080
voltage: 950
Can you tell me what settings on GPU do you use for this combination?
|
|
|
|
Hello,
First off all I want to thank you for your great product and all the effort you put in it. For several months everything worked perfectly. Few days ago on every boot I have this error:
- you must use -mport 3333 at your miner
- claymore-eth log file doesn't exist
- hardwaremonitor log file doesn't exist
- open hardwaremonitor on taskbar. options - remote web server - run
on the end of config file I added:
-mport 3333
After that GPU0 hangs and restarts miner, this repeats.
If I start mining directly from claymore-eth without node this doesn't happen. Can someone please help me with this one.
maybe too high -dcri value. Set to -dcri 4 when you are using simple ETH -dcri 8 OR -dcri 15 when dual-mining. you got this message because the miner stops and the client cant get info from the miner. if you can open http://127.0.0.1:3333 on your rig the client will work. check mport.txt it must contains: 3333 disable firewall & antivirus. i hope this do the trick Unfotunately not. Interesting is that error happens every second run  Forgot to mention: Dual mining UBQ/DCR (5x480 8gb) Until now it was on 30. I tryed -dcri 8 and 15 and I get same error. I tryed claymore 9.4 and 9.5 with node 2.9.fix, same error happens. I also try excluding GPU0 from dual mining (-mode1-0) and leaving -dcri 30 (default), that doesn't work at all. I can connect to 127.0.0.1:3333 every second run when error doesn't apear for short period. |
|
|
|
|
Hello,
First off all I want to thank you for your great product and all the effort you put in it. For several months everything worked perfectly. Few days ago on every boot I have this error:
- you must use -mport 3333 at your miner
- claymore-eth log file doesn't exist
- hardwaremonitor log file doesn't exist
- open hardwaremonitor on taskbar. options - remote web server - run
on the end of config file I added:
-mport 3333
After that GPU0 hangs and restarts miner, this repeats.
If I start mining directly from claymore-eth without node this doesn't happen. Can someone please help me with this one.
|
|
|
|
|
I use 5 rx480 8GB with dual mining UBQ and DCR
Before that it was dual mining ETH and DCR.
All run great for few months. Now my GPU0 (with monitor attached) hangs at startup. Any other card I attach monitor hangs on startup every time. Sometimes it can run well for 1h, but after that all hangs. I have lattest drivers, PC recognises all GPUs, everything looks ok. I gave little bit more power to GPU0 because of monitor.
(Wattman settings)
gpu 0: 1050 1000
memory: 2070 1000
fan: 1600 2600 65
power: 85 0
gpu 1 and others: 1050 950
memory: 2100 950
fan: 1600 2600 65
power: 85 0
|
|
|
|
|
