Hi IGHOR,
I try to install QTBT on my Raspberry but it seems to work anymore...
For a about 1 month it worked without any problems.
I can install the following packets without any errors: g++ qt4-qmake libqt4-dev qtmobility-dev libssl-dev libglu1-mesa-dev libqt4-opengl-dev
When I exec the "qmake-qt4 QtBitcoinTrader_Mobility.pro" command it didn´t find the "QtBitcoinTrader_Mobility.pro" file. I searched the file-system but it couldn´t be found.
Any ideas? thanks...
Use branch testing, this file is only there. |
|
|
|
I don't think there is a minimum amount, as I couldn find that on the FAQs. I've been able to buy/sell 0.003 btc without problems.
0.001 works? |
|
|
|
Hi IGHOR, I have a bug to report to you.
I was using the QT Trader with BTC-e and the buy/sell lower limit was 0.01 BTC, and that was OK because it is the actual exchange limit, but now I started to use it with Bitstamp and that limit is still enforced, although I can buy and sell smaller quantities via their website, so I think that I have found a bug.
Greetings and thanks for all your work!
Thanks, can you tell what is the minimum ammount for Bitstamp? I'll fix it. |
|
|
|
Answers for everyone that application remains free.
I'll do the best to make it better for users and exchanges.
Keep tracking updates.
Can we have an update with customizable rule sets so we can write our own (ie. "If %SOMEVALUE% goes 5% less than %ANOTHERVALUE% than do ..") before you release this version that requires exchanges to pay up? It would be greatly appreciated! Yes, you will receive this update. |
|
|
|
а будет поддержка пар лайта на бтцчайна?
Да, скоро в следующем апдейте. |
|
|
|
|
Answers for everyone that application remains free.
I'll do the best to make it better for users and exchanges.
Keep tracking updates.
|
|
|
|
What about adding US exchanges like coin.mx and a few others?
I'll contact them one by one. What BitFinex Error is:
"Nonce is too small" ?
Thanks
This mean that you used same API keys in other apps, or you trying to run two instances with same API keys. You should re-create API keys and use it only in one program. |
|
|
|
Hello again Ighor, no answers about chinese exchange platforms : Huobi / OKCoin BTC and LTC.
Is it possible to add support for it ?
Thanks.
Hi. New exchanges will be added as soon as we reach commercial agreements with them. You could tell the exchange this. http://qtopentrader.com/?Section=News |
|
|
|
Очень сильно не хватает «свечек», индикаторов (хотя бы простейших: SAR, RSI и MACD) и «рисовального» инструментария (линии, серии Фибоначчи и т.п.). Если будет всё это, думаю, популярность программы сильно вырастет.
Обязательно будет. |
|
|
|
I get this message for any exchange I try.
Your API key and secret are encrypted by AES256. Please enter password to encrypt data.
What password is that?
You need to create new password what will be used to encrypt your API keys what will be saved locally. |
|
|
|
Привет всем! Как я уже писал раньше, у меня есть много идей для разработки и улучшения Qt Bitcoin Trader. Этим летом, будут добавлены несколько мощных функций. Это, однако, будет стоить времени и денег. Поэтому я решил коммерциализировать приложение следующим образом. • Биржам, которые получат новых клиентов и торговый трафик из приложения должны платить, если они желают, чтобы их биржа была в списке поддерживаемых. • Я буду продолжать разработку и монетизацию приложения в компании Centrabit AG с капиталом CHF 200 000, совладельцем которой я являюсь. Это даст мне ресурсы для ускорения разработки и возможности внедрения других служб Centrabit, что сделает Qt Bitcoin Trader еще лучше для пользователей и бирж. В марте 2014 я свяжусь с некоторыми биржами и предложу им сотрудничество с Qt Bitcoin Trader. Я благодарен всем пользователям, которые поддерживали меня донейтами Bitcoin в течение последних десяти месяцев (всего 7 BTC). Благодаря вам это приложение вышло в свет. Отныне мне больше нет надобности получать донейты. Самое важное: • Qt Bitcoin Trader будет и дальше распространятся с открытым исходным кодом. • Главным приоритетом является безопасность и конфиденциальность пользователей. http://qtopentrader.com/?Section=News |
|
|
|
Hi everyone! As I have written before, I have several developments for Qt Bitcoin Trader in the pipeline. This summer, several powerful features will be added. This, however, will cost time and money. Therefore I have decided to commercialize the application in the following way. • The exchanges which receive new customers and trading traffic from the application will have to pay, if they wish that their exchange shall be featured in the enhanced application. • I will continue development and commercialization of the application within a datacom company where I am a part owner, Centrabit AG, with CHF 200 000 share capital. This will give me the resources to speed up the development and combine the application with other services within Centrabit, which will make Qt Bitcoin Trader better for users and exchanges. During March 2014 I will contact selected exchanges in order to check the interest for being featured within the enhanced Qt Bitcoin Trader. I thank all users who have donated bitcoin during the last ten months, (total 7 BTC). You have helped me make this application possible. From now on I do not need any more donations. For the avoidance of doubt: • Qt Bitcoin Trader remains open-source. • Security and privacy remain top priority. http://qtopentrader.com/?Section=News |
|
|
|
Unless I am entirely wrong the last buy/sell trading indicator seems to only trip if the current buy is at least some percent different then the last buy before the one you just posted. At least on BTCe that's what I noticed.
Using last and greater or less then some % for buy or sell and that does almost exactly what I wanted. Just not the way I was hoping. I do like the idea of some % above or below the last buy or sell. Still it does work with last and limit orders.
I'll make ability to create rule like this: "If %SOMEVALUE% goes 5% less than %ANOTHERVALUE% than do ..". Thank you! I have added your links. I got lost while creating a huge load of rules that enabled more rules and groups, which didn't really work in the end as soon as I was working with "when I have less/more btc than 50% do <action>". Somehow the 50% thing didn't work at all for me, didn't trigger once. Tried it with the trailing checkbox too. Same.
As far as I understood that right: Trailing is tracing my overall BTC/USD amounts so that a rule doesn't get triggered twice before a different rule for another pricerange.
Trading now again with 2 simple rules in just 1 group and nothing more. Works just like in the old version. Even though I have to edit the rules by hand every few hours.
But I would love to have the percent feature work for me. (Mac OS X)
I am also sure that it's possible to auto trade (when you have a decent amount of BTC) within any price range without editing rules or touching the trader again for weeks or even months.
For example: Creating a massive amount of rules and groups that trade a specific percentage of BTC/USD within every possible pricerange. 600, 650, 700, 750, 800, 850, 900, 950, 1000 etc.
I think it all depends on a perfect ruleset without _any_ errors at all and a high amount of BTC/USD to trade with. Problem there is (for me): To TEST that, you have to have a high amount of BTC/USD. Any if it goes wrong: well you are going to lose money because of testing. The more priceranges you'd like to autotrade with, the higher is the chance to lose money on testing the rules if there are any logical mistakes made by the trading person.
Ighor: I am not experienced enough for Linux to find out how to compile this on my RPi. Even had problems installing 1 or 2 dependencies that you mentioned, which I tried on Ubuntu. These just couldn't be found. (Forgot which one exactly.)
Was just wondering if you have some kind of precompiled version. I'd like to save some computer energy in the first place. Letting this run on a Raspberry Pi is also VERY interesting with the things mentioned above. (Setting up rulesets for never touching/editing the trader again and just let it run. If we see $1500 or $2000 this idea will go to waste, but that might take a while.)
I don't have precompiled version, I'm not sure about performance of ARM but I hope to try it on RPi soon. Hi Ighor,
I would like to request a "viewing only" mode, that uses an API pair which only has permissions to view the order book and last trades.
It almost works with v1.07.97, but with an error message "Identification required to access private API" that appears sometimes.
With a "viewing-only" mode, it shouldn't even attempt to access the "trade" and "info" parts of the account, to avoid the error message being triggered.
Thanks
I will do this soon. If, 24 hr Highest Price, Goes More Than, 10%, Sell All my BTC, Market Ask Price What I just don't understand is "Goes More Than, 10%" 10% of what? If it's current price then what is the tick time? Is it yesterdays low price? Is it price of my buy price? Is it the bid price of 10 minutes ago? I can't see how these formulas can work without defining the "Goes more than, 10% of........." That is why I want it to LOG the Price Range within a time frame ( excluding the current high price ) say if Yesterdays highest price was $700 ( 24 hr ago ) it will sell if it hits $770 today Currently the % will only work if its achieved in a tick movement as the highest price will just keep going higher but it will have no idea what the target price is bitcoinwisdom keeps track of opening , highest, lowest , closing prices I am wanting QT trader to do the same thing it only needs to log within the specified time frame I'll work to make this too. Thank you for screenshot, soon I'll make tests on macbook and fix this issue. |
|
|
|
Комп Вин ХР подключён к роутеру витой парой. Роутер витой парой подключён к инету по РРОЕ.
Никаких прокси, ВПН и т.п. нет.
Меня беспокоит одно. Не может ли это быть связано с вирусами?
У нескольких пользователей такое было, ошибка 9 означает что вместо данных файла получен html. Пока не могу воспроизвести и исправить. Возникла проблема:
1. Открываю 2 окна с разными АПИ ключами к BTC-E одного аккаунта.
2. В одном окне BTC/USD во втором LTC/USD.
3. Ставлю правила в обоих.
4. Через какое то время написано в каждом из окон что правило выполнено.
5. Смотрю историю сделок - продана пара только LTC/USD.
Что делал - перезапускал программы и окна и машину - ничего не меняется.
Ставил из репозитория ОС Debian. Компилировал QtBitcoinTrader_Mobility.pro - вот эту версию.
В чем беда непонятно ((
Минимальный интервал запроса для одной программы это 600 мс, вам стоит каждой программе задать интервал 1200. Нажмите Alt+Shift+D и посмотрите вывод дебага во время выполнения правила, пришлите мне лог на почту. |
|
|
|
Пытаюсь сделать автообновление. Загружает 99%, а потом выдаёт ошибку: Ошибка загрузки. Попробуйте ещё раз позже.
Unknown error
CODE: 9 Иногда просто виснет безо всяких ошибок. Что бы это значило? Как лечить? Пока не могу воспроизвести этот баг, перепишу авто обновление и будет исправлено в будущих версиях. Если у вас например ошибка только по Wi-Fi, или только по VPN, gprs, ppoe, или вы знаете другие особенности когда баг точно воспроизводится, сообщите и я буду тестировать. |
|
|
|
Последние сутки на btc-e после нескольких операций через бот банится IP и API становится недоступно.
Видимо изменили принцип DDos защиты. Как теперь работать через правила -не понятно.
Попробуйте увеличить интервал запросов. Отпишитесь о результатах. |
|
|
|
Спасибо, просто шаг группировки больше чем диапазон всех цен в стакане. Добавлю разные шаги для разных пар и исправлю. |
|
|
|
I'm not sure if someone asks this before but is it possible to trade on LTC Markets (BTCE - OKCOIN) ? If not, what to change in source code ? globally  Thanks anyway You can trade on BTCE with litecoins, BTC China litecoins support will be added on next update. can we please have some sort of data collection
Planed to Qt Open Trader. Is there a way to get this running on a Raspberry Pi for Linux users that are not that experienced with Linux? (I already couldnt open the .desktop application in Ubuntu, would like to have it running 24/7 on my RPi anyway because it takes less power.)
The best solution would be to get it running on the original Raspberry Pi Linux distr. called "Raspbian, Release: "wheezy".
Thanks so much!
You should find info how to compile Qt 4.8.5 on Raspberry Pi, if it done, you will be able to compile Qt Bitcoin Trader. I'm working on websocket engine, when it done, I'll add websocket support of Bitstamp too. Thanks! I read all messages, and I'll fix this bugs as soon I can. |
|
|
|
Здравствуйте и спасибо за замечательный инструмент. В ближайшее время закину небольшую благодарность
А есть ли у вас в планах добавление бирж, специализирующихся на форках? тот же cryptsy, к примеру
Привет. Cryptsy почти готов. Хочу сделать сборку пакета для openSuSE. Есть пара вопросов: 1) Под какой лицензией распространяется программа? [UPD]Вопрос снимается, нашёл внутри файл LICENSE.GPL32) Есть ли возможность для автоматизации сборки получать файл в автоматическом режиме с именем, скажем qtbitcointrader-1.x.x.tar.bz2 и соответствующим каталогом внутри – QtBitcoinTrader-1.x.x ? UPD: Пакет для OpenSuSE (12, 13 и Factory) находится в моих репозиториях OBS: http://download.opensuse.org/repositories/home:/m0Ray/Отправьте пример файла мне в лс. Я сделаю авто добавление его в sourceforge. Скоро добавлю лайт. В Qt Bitcoin Trader не используется GnuTLS а используется OpenSSL. |
|
|
|
|
Show Posts
