 Show Posts
|
|
Pages: [1] 2 3 »
|
|
I'd like to exchange some Monacoin that I have mined for any major coin.
If anyone knows a way to exchange this coin in an app with VPN let me know. I found out the hard way that I can't exchange this coin anywhere mainly because of where I live.
|
|
|
|
|
I bought this to keep and use but if you want it, I'll take offers. Its in hand and I'll be mining with it over the weekend and sending it off to a hosting center on Monday if I don't get an offer I can't refuse. Escrow only or local pickup in CT.
Too late. Not available anymore.
|
|
|
|
|
Comes with efudd overclock firmware, with license, Nicehash compatible, extranonce subscribe. Comes with PSU. All chips have been repasted with Artic Silver 5 and heat radiators have all been air cleaned. Runs better and cooler than new. If needed, machine can be setup prior to shipping/pickup for quick and simple plug and play. Located in CT USA. Pickup in CT, or buyer pays shipping with forum ESCROW. Any transaction with shipping must use escrow. $1200 USD in BTC or best offer.
|
|
|
|
$2350 per card? I hate to be the bearer of bad news but these are going for under a grand each right now, you'll have a hard hard time at this price.
This post is over a year ago. I've already sold those 2 that were listed. I have 1 left that I'm not actively selling. If someone wants it, make an offer. |
|
|
|
Interested in trades?
whats the gbic/qsfp speed?
I don’t know. I don’t even know what that is. If anyone wants it, make an offer. |
|
|
|
You sell now?
Maybe. Make an offer. I only have 1 left. |
|
|
|
ya and im the lier? Seller agreed to RMA the burnt board and I have been waiting four weeks for it to come back and he has blocked me since. Who is the scammer DO NOT POST SESC LINKS
No one has called you a liar or a scammer here. You do have a history of wasting peoples time, which follows you.There is more here than you let on, if you have an agreed upon RMA ongoing then that's different that saying BUYER BEWARE SELLER SOLD ME A BAD MINER AND STILL WONT REPLY THE BEST HASHBOARD ON THE MINER WAS BURNT WHEN IT ARRIVED
So I don't know what your agreement was or how long you expected the the repair to take not including time in transit. Depending on all that you can create an accusation but so far it doesn't sound out of the ordinary yet. If you do plan to go further you probably want to add pictures of the miner and something showing the discussion beyond ordering it. You may also want to think about editing your image to block your personal information. The seller sent the miner knowing ahead of time the board was bad and tried to cover his tracks by saying oh the hashrate varies and when I confronted him he said oh I told you the hashrate varies "yes but you did not tell me the board was completely burnt up all miners the hashrate varies but all hashboards should work and not show burn marks upon arrival. I have all the proof I need not sure what good it will do as this guy is on the internet and not even in the USA so it can be handled face to face like men. One of these days when I have a moment to upload all the pm and discord conversations I will do it but time is indeed money and I have lost allot of that with this clown who claims to be trusted here. Yes intentionally sending a burnt miner is a scam period. @Steam you have a lengthy history yourself of putting your nose where it does not belong so you are one to talk the mirror is your friend. Did you seriously say time is money? You wasted my time and I lost actual real btc because of you. |
|
|
|
Is your firmware for the X1 only for 4.22 and up?
It is for any. The loading process is by sd. That's too bad. Its hosted so I can't access it with an SD. If you have signature checking disable on it then you can update thru the web gui and not the SD How do I disable that? I will look at the files again today to see if there is a way to disable it on the x3. If you have ssh enabled it can be done using ssh Is there a special way to enable SSH? |
|
|
|
Is your firmware for the X1 only for 4.22 and up?
It is for any. The loading process is by sd. That's too bad. Its hosted so I can't access it with an SD. If you have signature checking disable on it then you can update thru the web gui and not the SD How do I disable that? |
|
|
|
Is your firmware for the X1 only for 4.22 and up?
It is for any. The loading process is by sd. That's too bad. Its hosted so I can't access it with an SD. |
|
|
|
|
Is your firmware for the X1 only for 4.22 and up?
|
|
|
|
For two nights in a row did my Z9 mine ZEC for Roskomnadzor? Or did Roskomnadzor block my miner and make him work on your wallet? Uncle is you. And yes, I am from Russia. I have nothing more to do here. Farewell.
For someone who doesn’t want help, you sure are insistent. Again, cannot guess without any data. This is nothing but conjecture. -j What he described happen to my Z11 last night, running 2.3.1nh. It was running for approximately 24hrs, then stopped. I see it switching pools back and forth in the log, but even still, I can't tell if its even mining. I actually noticed it when I went to bed but thought it was just a dev fee moment. But when I woke up, it was the same. I just rebooted and now its working. What info do you need to troubleshoot this? Just the supportId from status page. It is private to you, so send it in a PM please. The logfile would have been useful also, but it is lost when rebooted. -j I sent the support ID to you. If it happens again I'll get the log file. |
|
|
|
For two nights in a row did my Z9 mine ZEC for Roskomnadzor? Or did Roskomnadzor block my miner and make him work on your wallet? Uncle is you. And yes, I am from Russia. I have nothing more to do here. Farewell.
For someone who doesn’t want help, you sure are insistent. Again, cannot guess without any data. This is nothing but conjecture. -j What he described happen to my Z11 last night, running 2.3.1nh. It was running for approximately 24hrs, then stopped. I see it switching pools back and forth in the log, but even still, I can't tell if its even mining. I actually noticed it when I went to bed but thought it was just a dev fee moment. But when I woke up, it was the same. I just rebooted and now its working. What info do you need to troubleshoot this? |
|
|
|
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool? The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine. Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great. After hearing back from a couple users the X1 will get between 15.5 and 17gh after oc. I do not have a x1 and am going by reported results. Sounds great. I'm going to have to wait for some more feedback. Please post more when you get it. I link to a miner would be awesome, so we can watch it. |
|
|
|
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool? The newer x1 stuff is locked down. This unlocks the voltage and frequency controls back to the user. No I do not have any numbers as the file was done for another user originally. The performance can vary from machine to machine. Can you get this other user to provide info? I'd pay for something to increase performance on my X1 but right now, its too much of a mystery to pay 1 ZEC (~$100USD). I'm sure I'm not the only one that feels this way. More data would be great. |
|
|
|
Fusionsilicon X1 v4.22 unlocked User controlled freq and voltage is available for 1 ZEC or equal in BTC each. SD Install required and web gui update are both included. Updated to v4.22 offering voltage and frequency control.
Do you have any numbers showing any kind of improvement for the X1? Or a link to your X1 miner mining at a pool? |
|
|
|
So has crypto832 replied with the tracking from last night  No. |
|
|
|
The item has shipped we were without internet all last night wtf? I guess ill just recall it and eat the shipping.........................................
prove it |
|
|
|
used only a week comes with original box and psu!
$2400 shipped to usa will use escrow of course to keep everyone safe.
Hi, is this still available? When you mean escrow, is forum escrow, right? Many thanks, correct sir forum escrow and yes it is avail I messaged you about this. Let me know. |
|
|
|
I have a z11 brand new in box $2100 escrow of course
Are you in the USA? |
|
|
|
|
