I tried the release of MaxDZ8 This kernel raises the hashrate of +-14000mhs to +-19600mhs(3 X 7970hd) the temperature rises and consumption may also The program is very easy to understand, very intuitive. To say something bad ... Max did not remember the lonely miners , is only for pool In general, for me it's a great job Oh, nice, I think mine's still faster. let me try
|
|
|
Dude you could have told me you're discussing there. We can discuss openly, NP.
Yeah!! freshusers ready for a cold fusion M8M(for free)? Please post results here if using M8M
|
|
|
I tried the release of MaxDZ8 This kernel raises the hashrate of +-14000mhs to +-19600mhs(3 X 7970hd) the temperature rises and consumption may also The program is very easy to understand, very intuitive. To say something bad ... Max did not remember the lonely miners , is only for pool In general, for me it's a great job Can I have the kernel, too? https://github.com/MaxDZ8/M8M
|
|
|
I tried the release of MaxDZ8 This kernel raises the hashrate of +-14000mhs to +-19600mhs(3 X 7970hd) the temperature rises and consumption may also The program is very easy to understand, very intuitive. To say something bad ... Max did not remember the lonely miners , is only for pool In general, for me it's a great job
|
|
|
My only interest for a better performance is because my cards die I want to keep my hashrate, just that .... If you look at my post you will see that I released one groeslt version I made pasting bits of code that I was improved. ... and it worked, I used one week alone and then wanted to "donate" because I saw in another thread was sold (5 minutes after my announcement, also donated and is currently the principal involved in the development, with nothing to change)
They gave me some clues, or new user brings fresh wind to this world told me where to make those improvements.
Baraxlo ... you must leave your phone number, because if one day you do not go here with complaint ..... I worry about if something bad happened to you (just kidding friend)
PD Frangomel say..."We need more fresh for games"
|
|
|
What is the point of performance increase can you give me just one good reason?
Sorry, at this point I do not understand the question or the context
|
|
|
You're dangerous when you get bored I need four volunteers to increase their hashrate 40% for only 0.1btc
I could volunteer for increase but I am not good in programming Wolf0 sell your freshmod.cl by 0.5btc. We are two (Fragonmel and I) I keep trying with the code, but I learn by trial and error and now I'm stuck(with big headache). I searched all codes of the different currencies x11 to see if anyone has bothered to correct or improve, but so far everything is the same, maybe someone has written something good in simd.c, but I do not know how to rewrite simd.cl and there are no programs that convert with a click (maybe one) With the code Groelst music sounded, although the score was from another .... This is me being very difficult. I'm not a programmer(I make electronic wizardry), I'm just with a curiosity and a desire to learn.
|
|
|
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.
Some testers would be welcome however.
I'd try a lot. But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325) I can assure you that I have read all modifications and implementations with these algorithms http://eprint.iacr.org/2009/510.pdfhttp://www.cs.technion.ac.il/~orrd/SHAvite-3/ but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK) So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so). 200khs increments others are achieved by changing the code header for x11mod, for example Here's my results - my FRESH kernel is kind of a quick and dirty hack, but meh (NSFW): https://ottrbutt.com/miner/freshcoinwolf-01072014.pngCard type and clocks are in the notepad. Excellent, with very appropriate speeds-temp. I do not get them to work the idle treath... I think I'm stuck here and do not know how to make it work with shares Altering these settings can get more hashrate and HW too fast jejejeje Here, have a hint. for (int i = 0; i < 256; i ++) { s32 tq;
tq = q[i] + yoff_b_n[i]; tq = REDS2(tq); tq = REDS1(tq); tq = REDS1(tq); q[i] = (tq <= 128 ? tq : tq - 257); }
If I remember correctly (and it has been a while), one of these reductions is not necessary. I managed an increase 120khs...But very stable!!, not dance 100-200khs up down. I guess so much better computing blocks Most good optimizations provide SOME consistent increase, although there may also be some fluctuations, too. bufff not get to make music....one hint more please
|
|
|
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.
Some testers would be welcome however.
I'd try a lot. But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325) I can assure you that I have read all modifications and implementations with these algorithms http://eprint.iacr.org/2009/510.pdfhttp://www.cs.technion.ac.il/~orrd/SHAvite-3/ but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK) So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so). 200khs increments others are achieved by changing the code header for x11mod, for example Here's my results - my FRESH kernel is kind of a quick and dirty hack, but meh (NSFW): https://ottrbutt.com/miner/freshcoinwolf-01072014.pngCard type and clocks are in the notepad. Excellent, with very appropriate speeds-temp. I do not get them to work the idle treath... I think I'm stuck here and do not know how to make it work with shares Altering these settings can get more hashrate and HW too fast jejejeje Here, have a hint. for (int i = 0; i < 256; i ++) { s32 tq;
tq = q[i] + yoff_b_n[i]; tq = REDS2(tq); tq = REDS1(tq); tq = REDS1(tq); q[i] = (tq <= 128 ? tq : tq - 257); }
If I remember correctly (and it has been a while), one of these reductions is not necessary. I managed an increase 120khs...But very stable!!, not dance 100-200khs up down. I guess so much better computing blocks
|
|
|
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.
Some testers would be welcome however.
I'd try a lot. But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325) I can assure you that I have read all modifications and implementations with these algorithms http://eprint.iacr.org/2009/510.pdfhttp://www.cs.technion.ac.il/~orrd/SHAvite-3/ but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK) So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so). 200khs increments others are achieved by changing the code header for x11mod, for example Here's my results - my FRESH kernel is kind of a quick and dirty hack, but meh (NSFW): https://ottrbutt.com/miner/freshcoinwolf-01072014.pngCard type and clocks are in the notepad. Excellent, with very appropriate speeds-temp. I do not get them to work the idle treath... I think I'm stuck here and do not know how to make it work with shares Altering these settings can get more hashrate and HW too fast jejejeje
|
|
|
Not sure what base hashrate you're talking about but be advised 40% up kernels have been made available for free at least one month ago; I will port them to sgminer for only 0.1btc.
Some testers would be welcome however.
I'd try a lot. But of course I do not mean 200-300khs increments, in my tests 800khs get out more with 7950hd stock (925-1325) I can assure you that I have read all modifications and implementations with these algorithms http://eprint.iacr.org/2009/510.pdfhttp://www.cs.technion.ac.il/~orrd/SHAvite-3/ but my knowledge do not give more, perhaps compile with Cxl is not the direction to go (I'm now studying a little more SDK) So far I've only seen Wolf0 results in your screenshots and me I think (though Wolf0 squeezes gpu 1200 and so). 200khs increments others are achieved by changing the code header for x11mod, for example
|
|
|
My 280x are working on 4.45 mh/s undervolted, 7950 - 3.6 mh/s undervolted, temperatures are max 55!
7970.-1050gpu .-700memory=4,2mhs 55ºC 7950.-1050gpu .-600memory=3,99mhs 57ºC and two mounths before is a Kentucky Fried Chicken brick.Failure fans and sgminer not cut at 75ºC I have another two 7950, and one of this get the same way. I wouldn't downclock the memory if I were you... 280X doing 6.70MH/s at 1150/1600 - about 60C. With the current kernel I have not noticed big changes ... playing with memory loss 60-70khs nothing else. With the modified kernel that I have I can upload a 7950hd 925gpu 1350M to 4,5mhs but gives HW13 errors in 13 seconds lol ... does not work. I've tried everything to where I can go. Let me try that you keep .... I promise not to disseminate, I want to see where the modification is. The modification is a rewritten everything, actually. You're dangerous when you get bored I need four volunteers to increase their hashrate 40% for only 0.1btc
|
|
|
My 280x are working on 4.45 mh/s undervolted, 7950 - 3.6 mh/s undervolted, temperatures are max 55!
7970.-1050gpu .-700memory=4,2mhs 55ºC 7950.-1050gpu .-600memory=3,99mhs 57ºC and two mounths before is a Kentucky Fried Chicken brick.Failure fans and sgminer not cut at 75ºC I have another two 7950, and one of this get the same way. I wouldn't downclock the memory if I were you... 280X doing 6.70MH/s at 1150/1600 - about 60C. With the current kernel I have not noticed big changes ... playing with memory loss 60-70khs nothing else. With the modified kernel that I have I can upload a 7950hd 925gpu 1350M to 4,5mhs but gives HW13 errors in 13 seconds lol ... does not work. I've tried everything to where I can go. Let me try that you keep .... I promise not to disseminate, I want to see where the modification is.
|
|
|
In Thailand you can get what you want for $20/hour Shame about BTC price though... I hear they have many package deals. LOL
|
|
|
off-topic
You saw what happened in PAYCOIN? HAVE SOLD A $ 11 AND NOW WORTH $ 3 STRONG FALL It may all failed, or maybe they are making money with nerves. Do not understand how people carrying around here over a year fall into these traps.
ICO IPO and other experiments we know how to finish 99% But still biting into the trap.
|
|
|
My 280x are working on 4.45 mh/s undervolted, 7950 - 3.6 mh/s undervolted, temperatures are max 55!
7970.-1050gpu .-700memory=4,2mhs 55ºC 7950.-1050gpu .-600memory=3,99mhs 57ºC and two mounths before is a Kentucky Fried Chicken brick.Failure fans and sgminer not cut at 75ºC I have another two 7950, and one of this get the same way.
|
|
|
Can i get more when 4.6 mh/s at 280х?
Put your configuration Anyway I suggest that the card works smoothly because the ventilation systems in general are bad .. The fans lose strength at 4 months of heavy use. The thermal paste will crack and dry and temperatures rise. Noticing a card that unusual temperature rises, remove the rig, that card will cause irreversible BSOD and never returned because electrolytic capacitor is damaged. High temperatures cracked welds and cause short circuits. The cards are then only recognized as standard VGA and torn from safe mode ... Looks like you're gonna get with new drivers etc .. Nothing is further from reality. Prepare RMA if under warranty
|
|
|
Bter has a very low sales volume oof freshcoin. Shortly volume of coins too. I sense that users Freshcoin do not want to hang their currencies in exchange for nice and travel the world. I think we can do a third invest as ICO to sell coins to newcomers type localbitcoin and exit exchanges. Who would buy cheap freshcoin currencies has already had his chance, now it implement protective measures for anyone with € 3,000 rob us the illusion
We can protect users sha256 Multipool agreeing a price with them and so we take a weight down in price. Multipool must have a strict order of potency and closed user number. Multipool buy with btc always looking for a low price, of course.
|
|
|
Bter has a very low sales volume oof freshcoin. Shortly volume of coins too. I sense that users Freshcoin do not want to hang their currencies in exchange for nice and travel the world. I think we can do a third invest as ICO to sell coins to newcomers type localbitcoin and exit exchanges. Who would buy cheap freshcoin currencies has already had his chance, now it implement protective measures for anyone with € 3,000 rob us the illusion
|
|
|
Merry Christmas to everyone!!!!
+1
|
|
|
|