This coin has been delayed but it is not dead...POW for just a bit longer...get in while you can
|
|
|
Interesting project, not enough information as too how...a lot of work would need to be done, how would you vote on what gets added? who controls what is actually put in? How to prevent bots from voting? The issue is that someone is always in control of what gets written into history books...I would show proof of concept by creating a new 'national/international archive' by inputting past events so people can understand which history you are recording.
|
|
|
Hey Adwebinc,
Thank you so much for your posting...I'm glad you are happy with our platform and we hope to continue to provide excellent customer service!
|
|
|
Great project but I think you need to have bounty program so that it will be promoted very will, because your using crypto as payment, for sure that's the best thing to do
Thank you, we will be bringing up the bounty issue when we hit stable!
|
|
|
We are getting closer and closer to Stable...We have fixed visual and miner bugs for more than 6 GPU's.
We added the Pill to increase 1080 cards
We are now working on a few new features as well as simplifying and changing our GUI.
If you are experiencing any issues, please share with us in Discord!
Thanks, James
|
|
|
We are coming closer and closer to Stable version. We fixed visual bugs and miner window bugs. We are now entering into changing our GUI to simplify and for aesthetic changes.
If you are experiencing any issues please share with us in Discord!
|
|
|
We are very close to leaving beta status and being stable. We now have fixes for Mining screens opening (still mining for user) and visual bugs on GUI.
We will now be working on simplifying and changing our GUI!
Thanks to all the beta testers! If you have any issues, please jump into discord and share!
|
|
|
We are planning something special for you Ethereum Miners...stay tuned
Are you kidding us? Everything what can be done in ETH mining already have done several times. We have 57Mh with pill (gtx 1080 ti); and dual mining as well. We have several beta testers that have been asking us to increase ETH speeds...so yes I'm announcing to them that we are testing the pill and have a way to stabilize it with our platform. We will continue to announce new features to our platform and do apologize that this offends you. You were in the discord channel while we were discussing and it didn't seem to offend you then. Either way, thank you for your criticism as it helps make sure we are doing everything we can to please even the most difficult of people!
|
|
|
Something special is coming for you Ethereum miners! Stay tuned, early next week!
|
|
|
We are planning something special for you Ethereum Miners...stay tuned
|
|
|
I had to stop last night during benchmarking since after 40 mins the rig was at 30/114. Rig has 10 1080 Ti EVGA SC2 and pentium G3900 with 8 GB ram. I am planning to give it a try later today. Is there a shortcut or ways to bypass benchmarking? Maybe use GPU specific known settings?
With 1080's you shouldn't have to benchmark at all...were they not filled in for you? They will automatically adjust as you are mining I tried but got a message need benchmarking for at least 2 algos before mining can start. Yes James is right we did add a few new algorithms, to speed up the process uncheck all but one card in benchmarking then benchmark that 1 card. Once that card finishes you can right click on the disabled cards and copy the benchmarks from the one that benchmarked. Then re-enable the other cards and you should be good to go. Thanks Crypto for stepping in!
|
|
|
Hi All,
I'm building a mining rig and did all the setup and loaded windows 10 to my SSD (after replacing the laptop hdd with Ssd and installing windows). But when connected all my cables to the respective ports and started the rig, the bios is loaded during the first start. I set my DVD drive in Boot order as priority 1, then set SSD as priority 2. Now when I start the rig it gets stuck with a blank screen and the windows 10 is not loaded from the SSD, it's just a black screen in the monitor. (Connected the HDMI from main GPU to monitor)
I remove the SSD and tried to use in laptop and could load the windows 10 successfully.
Here few details of all peripherals i'm using in the Rig.
Mother board - TB 250 BTC Pro
CPU - Celeron 3930
PSU - EVGA 850 W GQ
GPU - Two RX580 (One is XFX made and another one ASUS made)
SSD - 256GB
Ram - 8GB DDR4
DVD drive
Can some one has a similar experience and know why the system is not booting ?
Why a DVD drive?
|
|
|
Hi All,
I'm building a mining rig and did all the setup and loaded windows 10 to my SSD (after replacing the laptop hdd with Ssd and installing windows). But when connected all my cables to the respective ports and started the rig, the bios is loaded during the first start. I set my DVD drive in Boot order as priority 1, then set SSD as priority 2. Now when I start the rig it gets stuck with a blank screen and the windows 10 is not loaded from the SSD, it's just a black screen in the monitor. (Connected the HDMI from main GPU to monitor)
I remove the SSD and tried to use in laptop and could load the windows 10 successfully.
Here few details of all peripherals i'm using in the Rig.
Mother board - TB 250 BTC Pro
CPU - Celeron 3930
PSU - EVGA 850 W GQ
GPU - Two RX580 (One is XFX made and another one ASUS made)
SSD - 256GB
Ram - 8GB DDR4
DVD drive
Can some one has a similar experience and know why the system is not booting ?
Sounds to me like a bios issue...check to make sure you you have the appropriate settings
|
|
|
you doing very well..
Thank you very much!
|
|
|
I had to stop last night during benchmarking since after 40 mins the rig was at 30/114. Rig has 10 1080 Ti EVGA SC2 and pentium G3900 with 8 GB ram. I am planning to give it a try later today. Is there a shortcut or ways to bypass benchmarking? Maybe use GPU specific known settings?
With 1080's you shouldn't have to benchmark at all...were they not filled in for you? They will automatically adjust as you are mining I tried but got a message need benchmarking for at least 2 algos before mining can start. When you have time, come into discord and I can help you through any issues/process you would like We just added new algorithms that hasn't been benchmarked by anyone yet...I'm benchmarking now so hopefully you won't have to benchmark any new algo after today.
|
|
|
Your COPY enabled algos from one card to another seems to not be working...thoughts?
I'll test that...I've used it several times so unless something has changed, then it should work. I'm guessing you are talking about right clicking on the card and then using the copy section...remember, this will not work if you are mining though...you have to stop the mining process I retested and made sure it was not mining and that function isn't working...The only version I've tried is the latest beta release I just tried to and it worked fine...if/when you are on next please join me in discord and let's get this issue solved
|
|
|
I had to stop last night during benchmarking since after 40 mins the rig was at 30/114. Rig has 10 1080 Ti EVGA SC2 and pentium G3900 with 8 GB ram. I am planning to give it a try later today. Is there a shortcut or ways to bypass benchmarking? Maybe use GPU specific known settings?
With 1080's you shouldn't have to benchmark at all...were they not filled in for you? They will automatically adjust as you are mining
|
|
|
Your COPY enabled algos from one card to another seems to not be working...thoughts?
I'll test that...I've used it several times so unless something has changed, then it should work. I'm guessing you are talking about right clicking on the card and then using the copy section...remember, this will not work if you are mining though...you have to stop the mining process
|
|
|
Seems like an interesting project and I wish you success, I threw my Nvidia rigs in this direction...I hope to see more activity but if I'm one of the few mining, I don't mind that either!
|
|
|
|