Show Posts
|
Pages: [1] 2 »
|
The cgminer source code (cgminer/bmminer) is GPLv3 licensed which requires you provide the source code upon request.
The GPLv3 states that you need to show us that you run our software and then we can send you the source code. We do not have to make the source code public. If you would like the source code, send us that you are running our software and share your contact details.
|
|
|
@dodgymon, Our software is not compatible with T9+. We are working on it.
@Evan, We also work to improve the hash rate. We keep the 1,9% fee as standard. Our team is working hard to improve the hash rate.
@rperus, You can switch back to bitmain firmware. There is a reset button. Hold it for 10 seconds. If it won't bring you back to stock firmware you also can hold the button (The one you can check wich IPaddress your antminer has) for 10 seconds.
|
|
|
Feel free to use Dollemizer, Runs 16,4 TH on one APW3++ 1600 watt PSU. Questions about the firmware can be stated @ our Slack or Twitter account. #Dollemizer
|
|
|
When will the ASICBOOST version be available? We have A LOT of S9's to run your firmware.
We got some T9+ miners in our possession right now and will fix a software version for that miner as well! Keep updated with our progress and follow us @Twitter: #Dollemizer
|
|
|
Thanks for pointing that out, however, under that post you will find the comments, that: ITS NOT ! i tried installing this on some of my miners and while it shows its mining on status, it mines on other pools... and he changed the ssh password too...
So this seems not like a very transparent software to us. We tried it for a short period and had issues. DolleTeam
|
|
|
On S9 temp on chip is not working (
Hi W15ER69, this can happen due to an update of the pic program of your miner. Please contact us directly through our slack channel, so we can elaborate that issue further. Kind Regards, DolleTeam
|
|
|
Can you paperclip it for 10 sec? This should set it back to it's original settings.
AriesIV10, thanks for helping out here. Kind Regards, DolleTeam
|
|
|
I tried this also but the dollemizer home screen on the miner was still there
It would be important to know the reason for your switch back to stock clockings. If you could provide us with a short insight on why you choose the stock firmware over our product we would really appreciate that. Kind Regards, DolleTeam
|
|
|
I tried this also but the dollemizer home screen on the miner was still there
Just clear your cache. F5 helps most of the time.
|
|
|
Thanks for that information.
We will have a look into that.
|
|
|
So the T9+ also can overclock ? and the testing the overclock is until how many hashrate ?
Yes, the T9 will also work with this firmware, and hash rates are similar to the S9! So the upgrade for the T9 will be bigger than the S9! The Dolleteam.
|
|
|
what does lite and basic different ? fees, setting interface, etc ?
The difference between lite and basic version are the settings, Basic will provide you with more functionality than the Lite version. The Dolleteam.
|
|
|
Do you support the R4?
This software is tested on T9 and S9. We dont have a version for R4 yet. Kind Regards, DolleTeam
|
|
|
so total is 1 day around 28 min, total fee is around 2% right ? That is correct.
Hi i have testing update the T9+ FW, but have the error cant to running, so your team can support the T9+ on future?
[...]
We are right now working on that. The T9+ has a different PIC and requires a different bmminer. We will publish the tested version as soon as it is stable on our side for more than 24 hours. DolleTeam
|
|
|
Incorrect firmware!!!
[...]
This happens when your connection is interrupted to the miner during upload. It is recommended to be connected via LAN Cable to the network you are flashing firmware to.
|
|
|
Dear Piscess16,
the Miner will mine in the first 4 Minutes for our fee. Then it will mine for 200 Minutes on your pools and will continue from there.
This is equivalent of ~ 1.96 % of the Mining time. (4/204)
For the T9+, we haven't done testing on a T9+, the T9 is very efficient and might be comparable.
Thank you for your question,
Your DolleMiner Team
|
|
|
we are selling small units as well
I Also would like to know more. If @dutchinno can join slack. So we can pick up the info as well. And would like to know more about your project as well @dutch
|
|
|
only thing i worry about is temperatures.... How well are temperatures under control with asicboost?
how well can hashrate be upgraded without higher tempratures?
Hi Dutchlincoln, Asicboost will adjust the way your miner calculates, nothing will be changed on volts or hertz. This way the temps will be around the same. (as far as we have seen on our testing rigs) P.s. (srry for the dutch) Mooie koelkast met geluidsfoam! Groeten, The Dolleteam!
|
|
|
I still do not understand why we should pay fee, when another FW with the same functionality is available for free?! Your FW can set only voltage and frequency, for the cost of fee, so where is the advance? For those who want to keep it fanless I can compile their version for free also. here is it: https://bitcointalk.org/index.php?topic=4491904.0Hi RadekG2, We could hide the fee in the program so no one would even notice... I'm not surprised if someone already does that. Instead, we choose to be transparent and ask a very low fee. We just released our 1st version of the firmware which does include the important features 90% of us want. Our focus lies on implementing Asic Boost for the masses, so not just Bitmain gets the sick hashes but we all do. That said, we hope ppl support our mission by using our firmware and by doing so improvs there own mining efficiency as well. Last but not least, our software is tested on multiple machines, does work as it should. And those miners with versions not compatible yet will be checked out and we will make sure they can benefit from it as well! The Dolleteam!
|
|
|
Hello @Hussain113,
With your amount of hashing power I should mine on a pool.
|
|
|
|