 Show Posts
|
|
Pages: [1] 2 3 4 5 »
|
|
good day, i started mining, found few blocks, but none has made it to my wallet. tried Discord link, but was banned before i even posted first message.
Any1 alive here or RIP nerva and off i go?
|
|
|
|
|
good day, why XP is in maintenance? thank you.
|
|
|
|
lol i think there are too many fans of scary movies in the thread. but that would suck big time to see the hack and whatnot. lets do bets  |
|
|
|
|
its not the first unplanned maintenance @ cryptopia. never been a problem before. i have some coins there and honestly hope this time wont be any different from before - fingers crossed.
|
|
|
|
it is not the same chain, thats why the swap. Devs fixed APR to 250% for the life of the coin(new coin) and swapping 5 to 1 now.
i hope you didnt send much, those coins in all probability will not make it to the new wallet.
way to swap is through a swap bot on discord.
and honestly speaking - the whole swap was in a conversation for a while by now.
good luck bud.
Thank  two dozen coins are dust for a sailor) ... but the whole story smells like a scent https://imgur.com/gallery/Fswaw8pi am from Odessa, i know about "dust for a sailor " |
|
|
|
|
it is not the same chain, thats why the swap. Devs fixed APR to 250% for the life of the coin(new coin) and swapping 5 to 1 now.
i hope you didnt send much, those coins in all probability will not make it to the new wallet.
way to swap is through a swap bot on discord.
and honestly speaking - the whole swap was in a conversation for a while by now.
good luck bud.
|
|
|
|
|
Today is the last day to swap old MIC3 to a new one. Please join discord to do so, swap bot is working for the last day today.
i am not a team member and have posted this just to help someone to NOT miss a due date.
please address all questions to dev team on discord.
LAST DAY TO SWAP COINS IS TODAY!!!!!
new MIC3 is already swapped by and trading at crex24.
DO NOT SEND OLD MIC3 to crex - those will be lost. swap at discord first. New wallet is on discord.
|
|
|
|
|
here is copy paste from guildex exchange discord.
HotSwapToday at 1:39 PM
@here I have made a few graphical changes as well as some cache changes. If something looks strange chances are you will need to clear the cache for wait for it to expire.
Also I will be starting to remove coins that have not traded AT ALL since they have been added. Ill give them another few days to see if the community cares or not. Once I remove the dead weight I will be accepting NEW coins once again.
At the movement the coins that will be removed are: TELOS, MAY, and 808. Get trading!
|
|
|
|
|
Accidentally tapped "report to moderator" while browsing on my cell, my apologies, didn't mean to.
|
|
|
|
good day guys, got too many unconfirmed stakes for the past week. any fix?
thank you.
Hi crytomob, You will need to go to transactions, right click with the mouse anywhere within the transactions and choose ‘clear orphans’. After that you will need to restart your wallet and it will go back showing just the correct transactions under minting prior to the unconfirmed stakes. all done, thank you much! |
|
|
|
|
good day guys, got too many unconfirmed stakes for the past week. any fix?
thank you.
|
|
|
|
Great a new website has started! 😁
Any news on a new exchange?
About my wallet, positive:
- The zero amount seems solved automatically
About my wallet, not so positive:
- Not able to send more than 10 digits. Also not through coin control. 9.999.999.999 is the most possible.
- Once staking it gets stuck when trying to do anything with the wallet.
About exchange:
- Tradesatoshi does not allow buy/sell of 100 million of any coin. Slow exchange with this limitation is no fun. Want to buy more, but is just not easy. Trillions of coins total supply and we are only able to move millions...
i think those guys are free to list, they require $1000 daily volume to prevent delisting. https://app.stex.com/en/listing-formit is a new stock.exchange address. i think trading Sprtsc on high volumes wouldn't be a problem. |
|
|
|
hi guys, need a bit of help here:
new classic wallet invalidated all transactions since September 10, and i reloaded entire chain with new wallet and it was stuck and not updating chain even though in conf file i added nodes and i had connections in qt.
used instructions on how to fix wallet, and now i have that exception: 11db exception not enough space. that's after i repaired wallet. also after repair all stakes since sept 10 showed orphaned.
transactions from tradesatoshi went through, staking works.
is it ok to keep it like that with an error message or is there a further fix?
also, i have unconfirmed amount sitting there for about 10 days... please advise how to fix it.
last question: could any one confirm that 2 billions is not a limit anymore and it is safe to combine larger inputs. and if yes - what is good input size to produce a stake shortly after maturity?
for those asking if smaller amount like 70-80 mils will stake - yes, it may take very long time though. i have an input of 77,7 mils sitting there for 117 days with a chance to stake of 39.98% within the next 24 hours.
thank you!
Hi cryptomob, Are you able to try the repairwallet again with regards to the 11db exception: Click on the Help menu Click on Debug window Click on the Console button In the console type 'repairwallet' and hit the enter key Close and re-open the Sprouts Classic wallet @cryptomob ...invalidated all transactions since September 10...
...all stakes since sept 10 showed orphaned...
These are signs that your on the wrong chain. (fixing this problem first might remove the other error) The solution is to delete all of the files in the data directory (except wallet.dat), install the latest version from the OP, and re-sync. So, be sure you have saved a copy of your current wallet.dat file, before trying anything. ... thank you for detailed answer, arcmetal, appreciate it much. error in qt appeared after i ran repair wallet from debug tab. should i do it again? Running debug again will most likely give you the same result. From what you describe it seems possible that you are running an old version of the sprouts wallet. It would explain the errors you are getting. While the wallet exe is open, check which version you are running. Go to: help >> about sprouts It should say: v0.1.2.3-gd0cbc83 ----- Other than the above, if I were you I'd do the following: 1. first make a backup of my "wallet.dat" file, save it on another PC or a separate flash drive, etc., 2. delete, remove any other files on the hard drive that are associated with "sprouts", delete any folders that the old sprouts may have created, or any old desktop files that point to sprouts, 3. start over with the latest copy of the new wallet listed in the OP, 4. use the latest list of addnodes in a new sprouts.conf file, 5. finally, after the new wallet is installed and fully synced, then go back and replace your "wallet.dat" file (that has your coins) into the new sprouts data directory. The new data directory could be located here: C:\Users\username\AppData\Roaming\Sprouts It could be that an old pointer on the desktop is still pointing to an old version of the sprouts wallet, and so this could be causing you problems. man, you are all about details!!! thank you very much. my wallet version is as you described, Sprouts Classic v0.1.2.3-gd0cbc83. i have started from saving wallet.dat, and then from new data dir. if anything - i will do it again, but its hard to expect it to behave different since i have done already synch from scratch and then replaced wallet.dat with my old wallet after full synch. nodes are added from the latest posts. test deposit to tradesatoshi went through. i think i will keep it the way it is for as long as it works and, OMG it stakes!!!! either way, appreciate your support, way to go! have a good one. |
|
|
|
hi guys, need a bit of help here:
new classic wallet invalidated all transactions since September 10, and i reloaded entire chain with new wallet and it was stuck and not updating chain even though in conf file i added nodes and i had connections in qt.
used instructions on how to fix wallet, and now i have that exception: 11db exception not enough space. that's after i repaired wallet. also after repair all stakes since sept 10 showed orphaned.
transactions from tradesatoshi went through, staking works.
is it ok to keep it like that with an error message or is there a further fix?
also, i have unconfirmed amount sitting there for about 10 days... please advise how to fix it.
last question: could any one confirm that 2 billions is not a limit anymore and it is safe to combine larger inputs. and if yes - what is good input size to produce a stake shortly after maturity?
for those asking if smaller amount like 70-80 mils will stake - yes, it may take very long time though. i have an input of 77,7 mils sitting there for 117 days with a chance to stake of 39.98% within the next 24 hours.
thank you!
Hi cryptomob, Are you able to try the repairwallet again with regards to the 11db exception: Click on the Help menu Click on Debug window Click on the Console button In the console type 'repairwallet' and hit the enter key Close and re-open the Sprouts Classic wallet thank you DZ, error is there after repair wallet was ran. |
|
|
|
hi guys, need a bit of help here:
new classic wallet invalidated all transactions since September 10, and i reloaded entire chain with new wallet and it was stuck and not updating chain even though in conf file i added nodes and i had connections in qt.
used instructions on how to fix wallet, and now i have that exception: 11db exception not enough space. that's after i repaired wallet. also after repair all stakes since sept 10 showed orphaned.
transactions from tradesatoshi went through, staking works.
is it ok to keep it like that with an error message or is there a further fix?
also, i have unconfirmed amount sitting there for about 10 days... please advise how to fix it.
last question: could any one confirm that 2 billions is not a limit anymore and it is safe to combine larger inputs. and if yes - what is good input size to produce a stake shortly after maturity?
for those asking if smaller amount like 70-80 mils will stake - yes, it may take very long time though. i have an input of 77,7 mils sitting there for 117 days with a chance to stake of 39.98% within the next 24 hours.
thank you!
Hi cryptomob, Are you able to try the repairwallet again with regards to the 11db exception: Click on the Help menu Click on Debug window Click on the Console button In the console type 'repairwallet' and hit the enter key Close and re-open the Sprouts Classic wallet @cryptomob ...invalidated all transactions since September 10...
...all stakes since sept 10 showed orphaned...
These are signs that your on the wrong chain. (fixing this problem first might remove the other error) The solution is to delete all of the files in the data directory (except wallet.dat), install the latest version from the OP, and re-sync. So, be sure you have saved a copy of your current wallet.dat file, before trying anything. Here is the sprouts.conf file I am using. Try it and see if it connects to the right chain: addnode=104.248.8.52
addnode=108.41.213.216
addnode=92.230.42.116
addnode=142.112.238.229
addnode=165.227.101.66
addnode=77.160.23.113
addnode=77.187.236.127
addnode=46.180.158.166
addnode=193.96.224.73
addnode=78.51.184.194
addnode=24.56.231.67
addnode=100.2.97.212
addnode=178.151.228.68
addnode=81.169.251.230
addnode=174.93.56.119
addnode=102.253.136.234
addnode=87.213.162.202
addnode=213.127.86.122
addnode=162.216.72.120
addnode=74.64.38.208
addnode=92.230.42.99
addnode=77.188.65.87
addnode=165.227.101.66
addnode=24.56.231.67
addnode=46.180.158.166
addnode=193.96.224.68
addnode=174.93.56.119 Concerning your last question about the 2 billion transaction limit. Not only I, but you can confirm for yourself that its now set to 100 billion by looking at the code. The link to the source code is in the OP. Here is a snippet of the posted source code. The file main.h, contains the lines that shows this: ...
//static const int64 MAX_MONEY = 2000000000 * COIN;
//The below variable increases the ability have a maximum of 100 billion Sprouts Classic coins in the wallet instead of the 2 billion.
static const int64 MAX_MONEY_2 = 100000000000 * COIN;
...
And, a few comments back DZPrince mentions that 500 million is a decent minimum for staking: I join, and the question is, how many coins do I need in my wallet to receive POS. While I have 80 million
The minimum needed for staking is 500 million. thank you for detailed answer, arcmetal, appreciate it much. error in qt appeared after i ran repair wallet from debug tab. should i do it again? |
|
|
|
|
hi guys, need a bit of help here:
new classic wallet invalidated all transactions since September 10, and i reloaded entire chain with new wallet and it was stuck and not updating chain even though in conf file i added nodes and i had connections in qt.
used instructions on how to fix wallet, and now i have that exception: 11db exception not enough space. that's after i repaired wallet. also after repair all stakes since sept 10 showed orphaned.
transactions from tradesatoshi went through, staking works.
is it ok to keep it like that with an error message or is there a further fix?
also, i have unconfirmed amount sitting there for about 10 days... please advise how to fix it.
last question: could any one confirm that 2 billions is not a limit anymore and it is safe to combine larger inputs. and if yes - what is good input size to produce a stake shortly after maturity?
for those asking if smaller amount like 70-80 mils will stake - yes, it may take very long time though. i have an input of 77,7 mils sitting there for 117 days with a chance to stake of 39.98% within the next 24 hours.
thank you!
|
|
|
|
|
