 Show Posts
|
|
Pages: [1] 2 3 4 5 6 »
|
rx 570 4gb Ravencoin mining on windows 10 with Team Red Miner Hi guys  i used to mine eth with claymore dual miner then phoenix miner. at this moment, god willing, i am going to mine ravencoin. i have rx 570 4gb gpu bios moded for eth. i was using hive os, but i had problems, i dont know if it is due to the bios mod. so ill be using windows 10 i think. i just wanted to ask, if someone can help me: 1) what windows 10 driver should i use? i need to patch it because of the biod mod right? 2) i used tt and fanmin on phoenix/claymore. is there any similar command in trm? 3) how should a .bat look like? thanks To be fair this is pretty simple stuff you should have found if you read the docs(EX search for driver in each for instance of) IE USAGE.txt / KAPOW_TUNING.txt , ETHASH_FROM_0.7_TO_0.8 1: I use a few behind newest but a newer driver: amdgpu-pro >= 20.30 or Adrenalin >= 20.9.1. 2:Fan: 55::::20:80 Target core temp to 55C, start fan at default configuration's speed, always keep fan between 20% and 80%. 3: teamredminer -a kawpow -o stratum+tcp://us.rvn.minermore.com:4501 -u RDpPHx43bhrmdyd8L6BcpkHtjuc1vMpNSk.trmtest -p x then tune according to the document |
|
|
|
Guys is there any 850w PSU around 80-90€ that I could order from amazon? Only I see Mars gaming psu which is 64eur but it have too many bad reviews and i'm scared to buy that... Then there is gigabyte 850w at 100eur, should I go with that one? It's still over my budget tho
You never go wrong with a Gigabyte product.Paying 10 Euro more than your budget is a good investment as a Gigabyte products are well known for their durability. Ive had good luck with Gigabyte products. Dont go with Thermaltake IMO, bought 3, had to RMA 2 , used advanced replacement. The replacement for 1st replacement one came dead, had to RMA that one with advanced(paid again) as well. Cant even keep track of their ticket / Erma system and right now and Ive paid for 3 more and still have no unit replacement....You also pay for shipping... |
|
|
|
|
What is a good hashrate from TRM on haven with a RX570 4gb?
I am getting around 900h/s. Trying to tweak but not much seems to make a difference...
|
|
|
|
I have Win 10 LTSC, AMD driver 21.2.2, PheonixMiner 5.5c.
I get about 50Mhs on my RX 6700, but I am only getting about 7Mh/s on my 8GB RX 470. I think my 8GB RX 470 used to get almost 30Mh/s.
Any ideas why my RX 470 is so slow?
Sounds like you are not in compute mode on the 470 (6700 doesnt need it) |
|
|
|
hi everyone
I've faced an issue recently
when I'm mining eth with team reader 0.8.0 on ethermine pool everything is ok but when I want to move to 2miners pool the bellow error appear
I'm mining with simple mining os and all configuration is ok
Pool asia-eth.2miners.com rpc method _mining.authorize_ timed out after 69 seconds. Reconnecting.
I've tried all pool addresses and SSL connection but the problem is still arise
can anyone help me?
Best to show your launch line with more information:) Your line should look something like this for windows if thats what you are using: teamredminer.exe -a ethash -o stratum+tcp://us-eth.2miners.com:2020 -u ADDRESS.MINERNAME -p x --enable_compute --watchdog_script |
|
|
|
I have a RX 5700 XT MIS Mech 8gb Windows 10.
It runs fine for 1-12 hours then cuts back to 47mh/s. I have tried adjusting the clock/mem down with a starting hashrate from 57mh/s down to 52mh/s(almost stock). 1230-1340 clock and 1750-1896 mem, all do this reset to 47mh/s...
Any idea why this card would randomly cut back to 47mh/s or a way to diagnose it? A restart of the software does not work I have to reboot the computer. I have 2 RX 570 8gb running with they card at 31mh/s and they are not affected.
Thanks
Put another fan on it cooling it....sounds like thermal throttling. Use hwinfo to monitor temps particularly the memory junction temps. From what i heard, Mechs are terrible at at cooling memory. Should be below 100c. I believe this was the issue, I moved the card to the outside edge of the rig and has not happened since. Thanks guys, would give merit If I could |
|
|
|
|
Is there a way to adjust the clock/mem/voltage from the command line? Unless ive missed it, I only see it in the GUI?
Thanks
|
|
|
|
Is there a way to set Navi/Polaris clocks/mem/volt from the command line such as(and this is made up): amdmemtweakxl -i 0 --vddci 718 --mvdd 1264 --SOC 825 Thanks |
|
|
|
I am trying to switch to TRM from Phoenix.
I am using Windows 10 Driver 20.11.1
This is my current config:
teamredminer.exe -a ethash -o stratum+tcp://pool -u EthAddress.Miner1 -p x -d 2,3,5 --enable_compute --eth_aggr_mode --fan_control=65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80
I use overdriven to change the cards clock/mem/volt
I have 1 RX5700Xt and 2 RX570. The rx570s work fine but when I start, TRM detects the 5700 DEAD for a while then starts loading the dag and then mines at around 1k/h second or so.
I am trying the suggested speeds of 1275 core, 1750mem and 850 volts.
Any ideas why this is doing it? This card can run up to 57mh/s on Phoenix
Thanks
when you use the AMD_Memory_Tweak or AMD_Memory_Tweak_XL program?, it must be run before the start of mining, so that it will enter the necessary parameters, if you run it during operation, then the 5700 video card will fall off (this is what happens to me), if this is not the case, try removing the --eth_aggr_mode parameter and instead choose a softer mode --eth_config=A I am not using amdmemtweak, I flashed the bios and then I used the Overdriven GUI tool to change the core/mem/volt and started TRM. I have tried it without the --eth_aggr_mode and same thing. then try not to run Overdriven GUI and see what happens and also this program amdmemtweak is still needed, even if not for 5700 video cards, but for 570 by raising the -tref parameter that cannot be flashed into the BIOS for video cards 5700 amdmemtweak can change the voltage parameters of the memory controller and the memory itself, as well as SOK That was the issue. Ive not used amdmemtweak. Do you use amdmemtweak or amdmemtweakxl? I looked it up and most posts are for the GUI and/or just timings but I flashed the timings. Would you have an example command line in windows for the 5700 for core/mem/volt? Thanks |
|
|
|
I am trying to switch to TRM from Phoenix.
I am using Windows 10 Driver 20.11.1
This is my current config:
teamredminer.exe -a ethash -o stratum+tcp://pool -u EthAddress.Miner1 -p x -d 2,3,5 --enable_compute --eth_aggr_mode --fan_control=65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80
I use overdriven to change the cards clock/mem/volt
I have 1 RX5700Xt and 2 RX570. The rx570s work fine but when I start, TRM detects the 5700 DEAD for a while then starts loading the dag and then mines at around 1k/h second or so.
I am trying the suggested speeds of 1275 core, 1750mem and 850 volts.
Any ideas why this is doing it? This card can run up to 57mh/s on Phoenix
Thanks
when you use the AMD_Memory_Tweak or AMD_Memory_Tweak_XL program?, it must be run before the start of mining, so that it will enter the necessary parameters, if you run it during operation, then the 5700 video card will fall off (this is what happens to me), if this is not the case, try removing the --eth_aggr_mode parameter and instead choose a softer mode --eth_config=A I am not using amdmemtweak, I flashed the bios and then I used the Overdriven GUI tool to change the core/mem/volt and started TRM. I have tried it without the --eth_aggr_mode and same thing. |
|
|
|
|
I am trying to switch to TRM from Phoenix.
I am using Windows 10 Driver 20.11.1
This is my current config:
teamredminer.exe -a ethash -o stratum+tcp://pool -u EthAddress.Miner1 -p x -d 2,3,5 --enable_compute --eth_aggr_mode --fan_control=65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80,65::::20:80
I use overdriven to change the cards clock/mem/volt
I have 1 RX5700Xt and 2 RX570. The rx570s work fine but when I start, TRM detects the 5700 DEAD for a while then starts loading the dag and then mines at around 1k/h second or so.
I am trying the suggested speeds of 1275 core, 1750mem and 850 volts.
Any ideas why this is doing it? This card can run up to 57mh/s on Phoenix
Thanks
|
|
|
|
|
I have a RX 5700 XT MIS Mech 8gb Windows 10.
It runs fine for 1-12 hours then cuts back to 47mh/s. I have tried adjusting the clock/mem down with a starting hashrate from 57mh/s down to 52mh/s(almost stock). 1230-1340 clock and 1750-1896 mem, all do this reset to 47mh/s...
Any idea why this card would randomly cut back to 47mh/s or a way to diagnose it? A restart of the software does not work I have to reboot the computer. I have 2 RX 570 8gb running with they card at 31mh/s and they are not affected.
Thanks
|
|
|
|
I saw that but it says you cannot use a driver newer than 20.5 and TRM recommends newer drivers? if you use drivers older than 20.5.1, then the miner will be slightly less efficient in speed and power, but if you use more recent drivers than 20.5.1, then the OverdriveNTool program for changing the voltage most likely will not work, so it is optimal to use version 20.5.1 Thanks, There is no other program that can do it? Any plans on TRM adding this feature? |
|
|
|
I saw that but it says you cannot use a driver newer than 20.5 and TRM recommends newer drivers? |
|
|
|
|
switching from Phoenix to TRM what are people using to control clocks/mem(did bios for timings). Ideally it would be a program that can be run using command line like Phoenix but prior to TRM running?
Thanks
|
|
|
|
|
I have a rx 5700 xt MSI Mech on Windows 10.
I run it with rx580s. It works fine at 57mh/s but will randomly cut back to 47mh/s(sometimes after 2 days, sometimes after 2 hours. I tried lowering the clock/mem even down to 52mh/s but this still happens randomly and I have to reboot in order to fix it.
Any ideas whats wrong or how to diagnose it?
Thanks
|
|
|
|
Hello,
Running PhoenixMiner / Windows 10 with 12 Nvidia Cards is running fine, but when adding the 13th Card, I got an "Out of Memory" Error. Adding extra RAM or enlarging Swap File doesn't help. Using different RTX and GTX Card, always the same.
Is this a hard limit, or is there a way to work around this?
Thanks for help!
Its definitely difficult to get 12+ GPUs working which is why most don't try but I think 13 should be possible. You say you increased the swap file without being specific - how big is the swap file? I would have it at 90GB-100GB for 13GPUS. I run 11 on a ASROCK H110 pro btc+ and recall going from 10 to 11 gpus and eventually got it working after increasing the swap file from 64GB to 80GB. If you already have a huge swap file you might check that your swapfile disk isn't running out of space (did that to myself once too). Currently I am using 80GB for 12 GPU, but even increasing to 100GB does not help with the 13th in the first place. Is somebody running the 13th GPU under Windows? Which settings for swap files and how much RAM do you use? I was running 12 with only 60gb page file with no issues(pre 4gb max) Unfortunately I only have the Biostar MB so Cannot test a 13th for you. During the 4gb rundown I switched to Ubuntu to get the most out of them. Now I am using that rig for alt coins and have issues depending on coin / miner I have to sometimes go back to Ubuntu to get it to work(Haven for example) but it does not seem to be the page file as under windows no more than 2 cards will initialize(using TRM/Haven but works SRBMiner/Haven). I have not been able to figure out why either. Not sure if this helps you:) |
|
|
|
can somebody help me? how can i turn on the compute mode on the tearedminer?
and can somebody share me the oc numbers for rx6800xt? thx
use --enable_compute, have to run as administrator |
|
|
|
|
I have 2 cards that are glitching in a 12 card rig running on Linux. What is the easiest way to relate the card in the software to the actual hardware card. On windows you just do not run the card and the fan does not run but the fans always run on Linux.
Thanks
|
|
|
|
I am trying to mine Haven on one of my miners however when I try to load more than one GPU I get the errors unable to initialize GPU XX. This does not happen on the other miner. Both windows 10. Sometimes it will initialize 2 but no more. Any idea why?
I switched to Linux and it works fine. SRBMiner works fine as well. I have large page file. Any ideas why I would not be able to initialize more than 2 cards? Thanks |
|
|
|
|
