 Show Posts
|
|
Pages: [1] 2 3 4 »
|
|
Could I transform into fiat money and deposit in my bank account using Uphold? I have friends who have told me that it is a good option
|
|
|
|
Depends on the country and bank. I think bank of america does not allow crypto trades so you will not be able to do it. However, it might be possible with one of the smaller american banks instead.
There is then no exchange that allows me to use bank of america?? |
|
|
|
|
Hello, I open this post to ask if there is any prohibition or regulation regarding cryptocurrencies and credit cards.
They told me that there is a prohibition on credit cards with cryptocurrencies.
That you could not buy cryptocurrencies with credit.
I use Bank of America. Will I have problems if I use this card to join my Wallets as CoinBase and Poloniex?
|
|
|
|
I have a dynamic ip router. And I have connected the rig through an ethernet. But my computer is connected to the internet through usb by the modem ... There is some program to be able to see the public ip of my rig?. it is because they ask for it in the pool Thanks for the help   |
|
|
|
Hi, anyone knows if it is possible to boot from a USB 2.0 It's just plug and play? I would have to configure something so that no problems? Thank's for reading my message |
|
|
|
|
Buy a kingston 120gb ssd. But windows recognizes it as a hard drive
I can not flash it with the etcher. because he tells me he can not find a removable unit ...
What do you think I should do?
|
|
|
|
|
I already solved it, I was a bit confused
|
|
|
|
|
Hello, can anyone help me with this doubt?
I bought 6 risers thinking they have a sata connection. But the risers come for molex. I do not have so many molex peripheral cables
Can not I simply connect the molex cables to the power source where the sata go?
Or should I buy other raisers?
|
|
|
|
Hi, I'm learning about this. But some claymore commands confuse me The default configuration of claymore in simple mining solo mining ethereum is this. -wd 1 -r 1 -epool pool:port -ewal user -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 I tried to set it up this way -wd 1 -r 1 -epool us1.ethermine.org:4444 -ewal 0x01b03620ABBEAc509A013fb433Bbf9D5156BF6B8 -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 Or I configure the pool port in 3333? And how should I configure the mport? I am 100% beginner, could someone help me out? |
|
|
|
|
Hello guys!.
I need help to learn how to set up the miner
The simple mining configuration for ethereum is -wd 1 -r 1 -epool pool: port -ewal user -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333
What values should I configure if I only want to use ethermine?
|
|
|
|
|
Hello, I come with this post to discuss when they think that the new version of the Antminer D3 will come out?... For example the D5
Do you think this 2018 will come out?
Or in 2019?
|
|
|
|
Use WhatToMine.com. The best available mining calculator which tells you about the current most profitable coins to mine according to what GPU you have. Moreover, it keeps you updated with the new mine-able coins popping up and you much revenue (in BTC and USD) you can earn weekly and monthly after your electricity costs have been deducted (of course, you put the cost of your electricity as well, per kWh).
Try it out.
In general terms. How assertive is Whattomine? 80% presicion? I think the numbers on that calculator are too optimistic |
|
|
|
|
Hello, I open this post so that someone can tell me about a good calculator.
On the internet there are many. But for your experience. Which one is closest to your daily earnings?
|
|
|
|
|
Hello, I come to ask if any of you use the SATA power connector on this board?
Do you recommend it together with the two molex?
|
|
|
|
That is outdated information that was was based on a driver limitation of a max of 8 cards of the same brand, AMD or Nvidia. Since the Windows v1703 Fall Creators Update the drivers have been updated and you can now run up to 13 of the same brand cards with the current AMD Adrenaline drivers in compute mode.
Ok, I just bought it. Will the new driver already be installed? |
|
|
|
|
Hello, I bought this motherboard along with a dozen Rx 580. but it tells me that it has to be 5 nvidia and 8 amd.
There is no way to use the 13 AMD GPUs?
|
|
|
|
|
I just reviewed it well, and it does not help me for what I want ....
Can I use an air conditioning protector for a rig?
|
|
|
|
A huge number of them. You can even buy an uninterruptible power supply (UPS). I advise you to choose from quite well-known brands such as AEG, APC.
Most consumer surge protectors (at least for the US) are not rated for more than 1,800 watts and given the 80% rule it wouldn't really be a good idea to max one out. If you have a lot of mining rigs, it is not really need to use UPS devices as you will likely never break even on them unless you have power outages all the time. The only UPS devices that handle 2000 watts require 30A circuits. OP - What country are you in and are you looking to hook up multiple rigs to a single power strip or a single rig consuming 2000w? Also - You can't 100% rely on a whole house surge protector. They work, I have one... but if a device on a circuit causes a surge it can impact other devices on the same circuit as the surge doesn't get shunted before it gets to the panel. 240v - If you are in the US and running 240v... you will need to find 240v power strips. For example: https://www.amazon.com/gp/product/B076ZDTGJ6Lastly - An important thing most people don't know about surge protectors... they loose their ability to protect over time as they protect you from surges and you don't really know it. So it is best to replace them ever few years... I hired an electrician, and installed 220 cables with 100A capacity |
|
|
|
Hi, I'm looking to buy a good surge protector. I'm looking for something that supports at least about 2000w. If anyone knows a trustworthy model, I would appreciate it |
|
|
|
|
