The frame arrived from Hong Kong today after 8 days of travelling. It was sent on monday (6th november) and i picked it up at customs office (Germany) on tuesday, one week later. I had to pay 16,17 Euro on top of the 100 USD, but they were totally worth it (imo). If anyone knows, how suklee could improve the paperwork for direct shipping to customers, feel free to share your knowledge.

I have prepared some pictures with comments on imgur: https://imgur.com/a/FnCQ5

+++

• Quick shipment
• GPU frame is well constructed and easily put together
• fits nicely into the Rosewill L4500
• the fan holes let you use the black fan boxes of the case, allowing a closed front for better airflow and/or better use of space inside the case
• GPUs hold rocksteady and have enough space around them to catch some air

---

• i didn't see suitable holes to fasten the frame inside the case, although there are enough screws and equipment to do so (i worked with double sided foam tape on the two bottom rails, which works perfectly fine)
• Putting the fan boxes on the frame requires a lot of patience

After all, i am very satisfied. Thank you!

Got my Rosewill case today. The inner dimensions are:

Height: max 17cm
Width: max 41cm

From the front to the mainboard, it has around 40cm of space.

Let me know, when you need more info.

Edit:

• Got rid of the hdd cages (+ three front fans)
• I can freely place the middle fan "wall". i guess it goes close to the mainboard (My Asrock H110 Pro BTC+ has a width of around 21 cm) with enough space left for the psu cables. Edit 2: Or maybe to the front, as done here: https://www.youtube.com/watch?v=BEsev9vTeHI
• I could use the other long and thin piece as gpu holder in the front. But i hope you come up with something less improvisational than me

Yes, it's that one (Rosewill 4U RSV-L4500), still haven't arrived today.

Looking forward to your results and an offer.

Thank you very much.

If you need this info: I am using one GPU on the mainboard, and 6 in the front (2x triple slot and 4x dual slot). Anyways, your approach with nuts and screws instead of pre-drilled holes for each gpu bracket would give me the flexibility for now and future changes of the hardware.

Wow. Willing to do a custom model? Sounds at least like you're serious about this product/service. Good luck!

Do you ship to Canada ?
Wanna get rid of my plywood frame 

Thank you! We can definitely try that, if it won't exceed the price for the 6-gpu-version that much. I am still interested. I think, my case arrives on monday. And i'll give you the exact dimensions on the inside then.

I run 20 rigs, 10 rigs are Sapphire rx 470 8g, and 10 rigs are Sapphire rx 480 8g, and all rigs are run with an eVGA 1300W psu.  I am dual mining ETH/DCR and run the DCR up to maximize output without hurting my ETH production.  That tends to lend itself to 1100W of power which is right at 10.0A of current on the 480 rigs.  Since I run 2 rigs off of one 20A breaker, I run a 470 rig and a 480 rig together because the 480's pull more power but can mine at a slightly higher rate and I control to a total load of 19A to make sure my breakers don't trip due to the swings in the process and power supply from the city.  All of my cards run a Mod'd bios and I run my cards to get 28.0 Mhs on the 470's and 29.0 Mhs on the 480's.  Depending on how you run your systems, I would recommend the 1300W psu since they are not much more expensive and it gives you some room on the DCR if you are only going to run one machine per circuit.  The more DCR you mine, the more power you will consume.  Plus, it will keep you away from the ragged edge of pushing you psu out of its control power factor.  Going up to a 1600W psu doubles the price and is only relevant if you have the room to pull that kind of power on your circuits.  Hope that helps.

I was thinking about this product a couple weeks ago when I upgraded to a 10lb wooden block.

pm me about an 8gpu one these frames are everything I need.

Hi I really respect your help thanks but I need one more answer ,where I can check how much is my hash rate and how much is my hash power.I dont have time to google it right now but here is so fast to get answer,thx again

Me too, I don't understand why anybody would mine ZEC with polaris gpus...