100K CIF to set up a masternode. PoS - no, masternodes will be replacing PoS.

We are looking to list with 3–4 preliminary exchanges.Coinexchange.io Mercatox .Yobit.  Potential CNY Supported Exchange (TBD) We will be distributing the Affiliate BTC after we have listed on exchanges.

Where is Dev? Or this dead coin?

I downloaded the wallet from ur site http://b2x-segwit (dot) io/static/files/win32_64.zip

Win64\bitcoin2x-cli.exe
Win64\bitcoin2xd.exe
Win64\bitcoin2x-qt.exe
Win64\bitcoin2x-tx.exe

it contains these files

what are these files, when i click on them a command prompt appears then disappears , what kind of a wallet is this? arent u supposed to release a normal wallet?

What's the best place to follow the updates on what's happening with the revival?

Got 5 masternodes running, about to get a 6th. Great project, devs are amazing people. This will succeed don’t pass on this one.

Aww, isn't this cute, you copy-pasted the bitcoin core wallet. Didn't even bother to change the texts.

Please be "attentive" and tell the "devs" you hired on upwork for 100$ that they forgot to enable Segwit in your segwit fork.

Hmmm I smell a rat

the best way to get this ICO success is to make bounty program.. when its available?

Hey,

Sorry if this has been covered previously, but has any one had an issue getting the firmware to load?

I tried multiple times today from various browsers.
I tried both the Antminer-D3-20171210_0-blissz.tar.gz & Antminer-D3-v2.04-20171222_0_beta-blissz.tar.gz
It starts the upload, does a reboot, goes offline, comes back up, but it is always the stock firmware.

I have the latest batch of D3, the 19.whatever.  I have it turned down to 419 on the frequency, and the fan down for the noise. I'm fine with the 15GH/s, but would like to be able to adjust voltages.

Any advice would be appreciated, if anyone has had this issue before.

Thanks,
@bigrobatx

My apologies to Zerp86 for using his post/

i have some question.. i'm still newbie..
1. how much hw error per hour count normal. example under 100/hour?
2. if pool 1 down/dead.. then it will switch to next pool2.. but if pool1 back online/alive.. it's will change pool1 immediately or it will mining pool2 until restart or and count timer also before it switch to priority pool1 ?

https://www.virustotal.com/#/file/f29f8743d5e6514bd18fae55b7d1c767ceef98ec7bd03ac05c620cb91a697962/detection

That IRCbot scares me

WARNING THIS FIRMWARE MIGHT VOID THE WARRANTY ON YOUR MINER









v1.12 :: 10/12 :: RECOMMENDED UPDATE


Download:
https://mega.nz/#!ylJX0LCQ!8JWryI0jDhgMvPdH2mrOvybkXCtrpYtQpxu0akdxU1s


Upgrade instructions:

• Recommended, at your current firmware, set the miner frequency at 400mhz and set your fan speed manual at 25% before flashing.
• Download the custom firmware. (don't unpack it)
• Flash by going to "System" -> "Upgrade" -> "Flash new firmware image" and select the custom firmware.
• After flashing, check the advanced settings page and start at the lowest voltage setting and 400mhz. From there increase your frequency to see how high you can go at the lowest voltage setting.
• Start tweaking some more. See the profile suggestions below.

Changes 10/12:
- Improved awesome miner / other mining managers compatibility (setting the priority was not working)
- fix kernel log window height (saves you double scrolling...)
- added permanent antbleed fix (prevent remote control of your miner by bitmain ) -> for details see http://www.antbleed.com/

Changes 08/12:
- improved stability on some pools (included prohashing)
- fixed pool priority issue after a pool temporary died.
- fixed high frequency settings above 650 Mhz
- increased frequency settings to the boards max physical limits (825Mhz. Don't try this without knowing what you're doing )

Changes 02/12:
- improved temperature sensor reading stability of all chains
- improved board / chain detection
- fixed an issue where the miner could hang mining the dev fee if your first pool is down
- improved awesome miner compatibility (special thanks to @funminer for beta testing)

Changes 29/11:
- seperated low hashrate and ASIC fail detection option in advanced configuration screen
- reboot on low hashrate or high ASIC fail rate only after 3 times consecutive detection (less sensitive now)
- further improved startup stability of all chains
- further cgminer binary optimizations

Changes 28/11:
- Fixed the automatic reboot on low hashrate or high ASIC fail rate.
- updated cgminer to v4.10 (for details see: https://bitcointalk.org/index.php?topic=28402.msg17594456#msg17594456)
- improved pool switching behavior
- improved startup stability of all chains
- cgminer binary optimizations

Please update versions older then 26/11 as it can damage your D3.

Changes 26/11:
- Solved an issue where loosing your network connection for a longer period could burn out your hashing boards as the fans run at a very low RPM.

Changes 25/11 v2:
- Hashrate calculation is now according bitmain stock firmware (displayed  hashrate is ~3% higher now)
- + ~1% performance improvment by providing the work faster to the ASICs  
- removed dev pool from miner status page to speed up webinterface and avoid confusion (exact dev mining details are visible in the kernel log)

Changes 25/11:
- fixed auto reboot on low hashrate / xxxx
- fixed issue where temperature readings could be wrong
- fixed fan error on some units
- improved stability
- allows for zero RPM fan (all custom fans should work now)
- increased upper limit frequency for overclocking. (not recommended though )
- dev fee kicks in a bit later now after changing settings

Changes 23/11:
- way faster mining startup after changing settings / reboot
- adds the reboot on low hashrate option
- ~ 1% improvement on effective average hashrate *jeeej*
- fixed flash upgrade speed to new versions
- added AUTO FAN profiles:
The AUTO default profile is the one that's in since the start, the performance is more like the stock bitmain auto fan profile and the silent profile keeps things nice and quiet. Manual mode is for setting a static fan speed.

Changes 21/11:
- Firmware now based on latest Bitmain firmware (20/11/2017)
- made default bitmain voltage a bit more clear in the list.
- Applied a more silent AUTO fan profile.
- Fixed the high fan RPM at startup when using AUTO fan speed
- several webinterface fixes

Changes 20/11:
- ASIC frequency adjustable per chain
- Voltage settings adjustable per chain
- new graphics. (You might need to clear your browser cache)
- Switching pools overhead lowered (now mines for fee every 2 hours)

Changes 18/11:
- fixes the pool priority, it will now mine on your own backup pools when your first pool goes down.
- Dev fee lowered to 1,5% (it was actually 1,66%)

Changes 17/11:
- fixes the high fan speed when switching to the dev pool and back to your main pool
- fixes the close PIC and need reboot!!! error on the original bitmain firmware
- Made the ASIC default voltage less confusing as it is now comparable to the default bitmain voltage.
- Lowered the AUTO profile fan RPM's a little bit.


know issues:
- switching pools can sometimes cause the miner to wait for work for ~5 seconds. (improved from ~10 seconds)
- loosing network connection doesn't stop the mining boards properly (this is default bitmain behavior, but I don't like it, so it will be changed in the future)


Important:
- As this firmware allows extreme overclocking / reduce fan speeds, I am not responsible for any damage to your miner. So flash at your own risk and please use the firmware wisely.
- There is a 1,5% mining fee as compensation for the effort I put into this project.

Some startup settings to get you going:

for silence and best efficiency / miner lifetime (my personal preference)

Expected hashrate: 15Mh/s to 17 Mh/s
Expected power usage: 700 - 780 watt

set the frequency at "400mhz", set the voltage to "lowest". Now slowly increase the frequency until you see HW errors. When you have a few HW errors an hour you found the sweet spot
set the fan speed manual somewhere between 20 - 30 percent. Chip temp should be somewhere between 75 - 80 degrees max.

For stock performance at lowest possible power usage

Expected hashrate: 18-5Mh/s to 19Mh/s
Expected power usage: 950 - 1100 watt

set the fan speed to automatic mode.
set the frequency at "525mhz", set the voltage to "13". Now decrease the voltage until you see HW errors. When you have a few HW errors an hour you found the sweet spot

For Extreme performance (this is not recommended for 24/7 usage)

Expected hashrate: 21Mh/s
Expected power usage: 1300 - 1400 watt

set the fan speed to automatic mode.
set the frequency at "600mhz", set the voltage to "18". Now decrease the voltage until you see HW errors. When you have a few HW errors an hour you found the sweet spot


Back to bitmain stock firmware:
In case you want to go back to the original firmware:
- set the voltage of all boards to 13 before flashing back (just to make sure...)
- download and flash this image: https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E
- reset to defaults


Firmware recovery:
This is only needed if the miner doesn't boot anymore (In case you had a bad / interrupted) flash:
- get a microsd card
- write this image to it with win32diskimager: https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C
- insert the micro sd card in the d3 controller board and power it on. The miner webinterface will come up again. (maybe under another ip)
- redownload the firmware and flash again.
- remove the micro sd card

Special thanks goes to:
- All the first beta testers
- cryptonitro for this awesome new Antminer icon

how can i mine Saga coin? someone help me please.

I'm having a really hard time selling fedoracoin for btc . Is thier another exchange ,  besides coinexchange where i can do this at ? I'm trying to change .5 btc worth.

Lumayan juga ya gan hilangnya, udah nambang 5 hari eh malah hilang kena hack. Gan ane mau nanya. Itu kalau hilang diambil hacker. Faktornya karena apa ya gan? Maklum ane masih Newbie jadi masih kebanyakan nanya hehe Mohon dibantu jawab gan