hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)
Tried to downgrade version but all I get is this:
any clues? currently I have to use another miner on the w5700 that is slower
Hi Sikkan666, Sorry, this is not yet resolved in the new version. Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3. Let us know if this helps. Cheers hey, it actually started mining on the card.. crashed after a few mins but that was probably due to a bad OC for this algo.. and also, it had the same speed as the other cards  what does mode 22 do? Hi Sikkan666, Thanks for your message. In some cases you may want to select a specific mode/kernel for miniZ to run in your GPU. In this case --mode3=22 selects mode/kernel 22 to run on GPU3. (miniZ was not selecting the correct kernel for your GPU.) It is possible that some kernels do become unstable and others do not, when applying OCs. Have you tried adjusting OCs? In any case, we appreciate that you leave us a message if a mode is dramatically unstable also after trying with stock settings. Cheers |
|
|
|
and still too much stales/rejects with 2.4d like with 2.3c when mining 125.4, so, back again to 2.2c Hi somaton, Thank you for the feedback. Could you try adding --stale=200 (or maybe 300) to your command line and see if it helps? Cheers |
|
|
|
Here: miniZ.exe --url=btc.5950x@zelhash.auto.nicehash.com:9200 --url2=btc.5950x@pyrinhash.auto.nicehash.com:9200 --pass=x --priority=1 --telemetry=0 --minimal --logfile miniz-pyrin-125.4-nice.log --gpuclock=1560 --fanspeed=42 --fantemp=65 --gpuoffset=240 lets hope it can be fixed fast Hi somaton, Thanks for the information. We were able to run your command line... Could it be that it didn't crash that it's just taking a bit longer to start? Could you also try with stock settings, just to discard some issue with OCs? Let us know if this helps. Cheers |
|
|
|
Hi, did not had time to check 125.4 with new version, but tried 125.4 + pyrin and it does not work. Is it me or something else?
************ miniZ v2.4d ************
Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1
Driver: 528.49
Algo: [Equihash125,4] [smart-pers]
Pool#0: user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof]
Pool#1: user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin]
Logging:: file[miniz-pyrin-125.4-nice.log] period[10] delay[0]
Optimisation: ocX[0]
Temp. limit: [90 C]
[INFO ] Mining fee set to 2.00%
[INFO ] Applying clocks to GPU[00] core offset= +240MHz mem offset= +1MHz power= 0W gpuclk=1560
miniZ<Equihash125,4+pyrin>[18:0:00.0: 9087]: Selecting GPU#0[0] Gigabyte RTX3080 Gaming OC 10G
It is crashing right after selecting gpu. Tried with 2.3c and it does start mining, but it is mining 125.4 only and does not show anything about pyrin?
Hi somaton, Thanks for the message. Could you paste here your command line? Cheers |
|
|
|
hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)
Tried to downgrade version but all I get is this:
any clues? currently I have to use another miner on the w5700 that is slower
Hi Sikkan666, Sorry, this is not yet resolved in the new version. Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3. Let us know if this helps. Cheers |
|
|
|
v2.3c
ZIL mining hashrate not available in API.
Hi angelbs, You can check ZIL stats: curl 'localhost:20000?/getstat"id":2' -s|jq You can now also check ZIL stats on localhost:20000/zil Cheers |
|
|
|
Too many rejects with 2.3c mining 125.4, back to 2.2c and again 0 rejects. Kernel number is shown like "0019", not "19" like with older versions and because of this console window looks very messy with multigpu rigs -> info per gpu does not feet to one line like it was before, now it takes two lines, that second one is almost empty.
Hi somaton, Could you check the new version and let us know how it goes? It should be working well now. Thanks! Cheers |
|
|
|
Hi everyone,A new miniZ version v2.4d is out with improvements for KarlsenHash and PyrinHash algorithms. Also, added AMD support for Equihash 192,7, PyrinHash, and KarlsenHash algos! Maybe there is still some room for improvement on the dual mining. Let us know about your favorite algo combinations and we will have a look!Please find miniZ version v2.4d @ Download page 
Changelog: * Improved hashrate for PyrinHash and KarlsenHash. Up to 7%, this depends on GPU.* Added support for PyrinHash algo - Pyrin (PYI), for AMD. Fee: 0.8%.* Added support for KarlsenHash algo - Karlsen (KLS), Nexell-ia for AMD. Fee: 0.8%.* Added support for 192,7 algo, for AMD. * Added new option -pl auto. miniZ will find best power when optimizing for efficiency. * Major improvements for Equihash dual mining.* Fixed issues with dual mining with k1pool. * Fixed EthashB3 (HYP), for AMD. * Added support for RX 7800 XT, AMD GPU.* Fixed invalid shares in 192,7. * Added ZIL stats to telemetry. Ex: localhost:20000/zil * Added --minimal, --hideclocks options for minimal console log output. * Fixed JSON getsats for dual mining. * Removed support for obsolete Kepler GPUS. * Removed support for kHeavyHash algo. * Few minor fixes. *** Thank you all for the feedback! ***For additional information check our Usage or FAQ pages. Download miniZ latest version here.
Follow us on X/TwitterHappy dual/triple mining!
|
|
|
|
equihash 144,5 for BTG has huge hashrate drop vs 2.2c.
Hi arch111, Could you check the new version and let us know if this is ok now? If not let us know which GPU are you using. Maybe, pool also. Thanks! Cheers |
|
|
|
Hello After update to v2.3c report hrate it is broke, mest up aka instead report a ~37 Sol/s it report ~19 Sol/s, command line it same for bouth, nothing change :loop
.\miniZ.exe --url=X@equihash192.eu.mine.zpool.ca:2192 --pass c=X,zap=YEC/ZCL/ZER --par=192,7 --pers=auto --cuda-devices=0 --coolui --list-modes --show-mode --telemetry=0 --server-share --log --log-period 30 --log-delay 30
timeout /t 5
goto loop
cheers im seeing same as sir_blacks. Cut hashrate by like 1/2. Rolled back to 2.2 and full hash again.
Please fix…its nice to just leave miner on latest version.
Hi sir_blacks, miner29, Thank you for your messages. We're about to release a new version. Could you check it out and let us know if issue persists? This should be resolved now. Cheers |
|
|
|
Karlsenhash does not work
miniz --nocolour --par=karlsen --url karlsen:***@kls.2miners.com:2020
Previous 2.2c works fine
Hi angelbbs, We're about to make a new release Things should be resolved now. Do let us know if, then you fin any issue. Thanks! Cheers |
|
|
|
BeamV3 broken in v2.3c. miniz --nvidia --cuda-devices 0 --nocolor --par=beam3 --url ssl://wallet@beam.2miners.com:5252
Karlsenhash does not work miniz --nocolour --par=karlsen --url karlsen:***@kls.2miners.com:2020 ************ miniZ v2.3c ************
Number of miniZ CUDA>=[.] using driver CUDA[12.20] devices found: 1
Driver: 536.99
Algo: [karlsen] [smart-pers]
Pool#0: user[karlsen:***]
server[kls.2miners.com] port[2020] ssl[no] var[karlsen]
Telemetry: [http://localhost:20000]
Optimisation: ocX[0]
Temp. limit: [90 C]
[INFO ] Mining fee set to 0.80%
miniZ<karlsen>[05:0:00.0: 7113]: Selecting GPU#0[0] NVIDIA GeForce RTX 4060 Laptop GPU
[ 0d 0h 0m30s] 0>RTX 4060 Laptop GPU 100% [50 C/ 0%] 0.00( 0.00)H/s 4( 4.2)W clk=210MHz mclk=405MHz H/W=0.000
[ 0d 0h 0m40s] 0>RTX 4060 Laptop GPU 100% [50 C/ 0%] 0.00( 0.00)H/s 4( 3.7)W clk=210MHz mclk=405MHz H/W=0.000
[ 0d 0h 0m50s] 0>RTX 4060 Laptop GPU 100% [50 C/ 0%] 0.00( 0.00)H/s 3( 3.4)W clk=210MHz mclk=405MHz H/W=0.000
[ 0d 0h 1m00s] 0>RTX 4060 Laptop GPU 100% [50 C/ 0%] 0.00( 0.00)H/s 3( 3.3)W clk=210MHz mclk=405MHz H/W=0.000
[ 0d 0h 1m10s] 0>RTX 4060 Laptop GPU 100% [50 C/ 0%] 0.00( 0.00)H/s 3( 3.3)W clk=210MHz mclk=405MHz H/W=0.000
[ 0d 0h 1m20s] 0>RTX 4060 Laptop GPU 100% [50 C/ 0%] 0.00( 0.00)H/s 3( 3.2)W clk=210MHz mclk=405MHz H/W=0.000
Hi angelbbs, Thank your the message. We've tried your Beam cmd line and got no issue. Could you try again and/or detail a bit more the issue you're having? For example, you can paste here the error message or miniZ log. Regarding karlsen, you're right, but it occurs only with 2miners. It's functional with other mining pools. This will be fixed in the next release. Cheers |
|
|
|
@miniZ
Pls, fix api `/getstat` in dual mining to proper JSON "[{}, {}]". (now "{}{}" - dsn't valid)
Hi Quake4, Thanks for the feedback. This will be resolved in the next version. Cheers |
|
|
|
Hi everyone,A new miniZ v2.3c version is out with support for KarlsenHash and PyrinHash algorithms. You can now mine Karlsen, Nexell-ia, or Pyrin. Additionally, you’ll be able to dual mine any algo with KLS/NXL/PYI. Also, add ZIL for a triple mining experience. 🙂 Please find miniZ v2.3c @ Download page.  Changelog:* Added support for PyrinHash algo - Pyrin (PYI), for NVIDIA. Fee: 0.8%.* Added support for KarlsenHash algo - Karlsen (KLS), Nexell-ia for NVIDIA. Fee: 0.8%.* Added support for dual mining with PyrinHash/KarlsenHash (X + PYI/KLS/NXL), for NVIDIA.1* Added support for triple mining with PyrinHash/KarlsenHash + Zilliqa (X + PYI/KLS/NXL + ZIL), for NVIDIA. 1* Added --no-ocx option: miniZ will not run ocx at the begging (previous default). 2* Added --powerf option: applies a fraction of the nominal power to all gpus. (requires sudo/administrator privileges) * Added various options for dual mining: --url2, --dualw, --dualw-all, --dual-mode, --dualmode-all. * Added --profit/--accprofit options to shows a rough estimate of daily/session profits on the console. Provided by https://minerstat.com* Improved automatic algo detection. * Removed support for obsolete Kepler GPUS in most algos. (Still possible with Ethash, ProgPoW, and Equihash 210,9). * Improved ocx functionality. On start, miniZ will take a few seconds to perform ocx.* Major improvement for ETH/progpow invalid/stale shares.* Various minor/major fixes. 1 X refers to any miniZ supported algo. See FAQ. 2 From this version, miniZ will always run at start ocx by default. You can use --no-ocx option to disable ocx from performing at the begining. * * * You can check dual algo mining stats information on Telemetry. * * * * * * We notice that dual mining with Equihash algos is quite profitable with NVIDIA RTX 4070 Ti. * * * Atention:- In future release miniZ will drop support for KHeavyHash (KASPA). - In future release miniZ will remove support for Kepler GPUs, for all algos. - Removed support for Equihash 96,5. *** Thank you all for the feedback! ***For additional information check our Usage or FAQ pages. Download miniZ latest version here. Follow us on X/TwitterHappy dual/triple mining!
|
|
|
|
Does not connect to daggerhashimoto.auto.nicehash.com:9200 miniz --show-pers --nvidia --cuda-devices 0 --par=ethash --url ***************@daggerhashimoto.auto.nicehash.com:9200 --pass=x ************ miniZ v2.2c ************
Number of miniZ CUDA>=[.] using driver CUDA[12.20] devices found: 1
Driver: 536.23
Algo: EQ[ethash] [smart-pers]
Pool#0: user[**************]
server[daggerhashimoto.auto.nicehash.com] port[9200] ssl[no] pers[OCTA]
Telemetry: [http://localhost:20000]
Temp. limit: [90 C]
[INFO ] Mining fee set to 0.75%
[ 0d 0h 0m30s] [OCTA]
[ 0d 0h 0m40s] [OCTA]
[FATAL ] No devices selected, exiting...
[INFO ] QUIT miniZ
2.1c works fine Hi angelbbs, Thanks for the message. It seeems that the stratum has changed. Could you add stratum1:// just right before the wallet string, and try again? --url=stratum1://WALLET@daggerhashimoto.auto.nicehash.com:9200
Let us know if it works OK now. Cheers |
|
|
|
Application just started crashing don't know why. Gone back to GMiner 3.41 no drama....just consistent at terminal and more importantly at pool...miniZ just at terminal not at pool.
Hi kade123, Are you still having issues with miniZ? Could you detail the behavior? It may help us test it if you paste here your command line. Could you also paste here the error you get in the terminal? Thanks. Cheers |
|
|
|
Hello,
yes on windows its working fine but in Hive os its showing error connecting to the pool this error only in Hive os , my gpu on windows just works fine with these cmd line no issue at all.
Hi Josef997, How are you configuring your flightsheet? You can create the usual flightsheet for btg mining, and then in 'Setup Miner Config' -> 'Extra config arguments', you can add --url=ZILWallet.WorkerName@eu.crazypool.org:5005 (and all other extra options you need). Let us know if this helps. Cheers |
|
|
|
i have an issue with BTG dual with Zill it's not working as well please advise.
Hi Josef997, Thanks for the message. We tried the following and it is working well. The miner is connecting and sending good shares to both pools. ./miniZ --url=BTGWallet.WorkerName@btg.2miners.com:4040 --url=ZILWallet.WorkerName@eu.crazypool.org:5005 --extra Could you detail about what is not working? For example, do you get any error message? Or maybe, could paste here your command line? Cheers |
|
|
|
Hello Team having an issue with MiniZ trying to mine Zelhash via Nicehash. Getting all Stale: Above Target Level shares. Have tested with Gminer and LolMiner both work without issue. Using MiniZ via HiveOS any suggestions?
Hi bizcoin85, Could you check if the miner is starting with correct algo and pers? If not, then try adding the following to your command line: --pers=ZelProof --par=125,4 If it doesn't help, could you paste here your command line? Cheers |
|
|
|
Кaк зaпycтить EvrProgPoW в cpeдe линeкc?
Hигдe никaкoгo oпиcaния нeт
Кaк выбpaть aлгopитм? eгo нeт в cпиcкe!
How to run EvrProgPoW in Linux environment?
There is no description anywhere
How to choose an algorithm? it's not on the list!
Hi Eujenvanino, We made a FAQ - How to mine Evrmore?Did you manage to make it work? Let us know how it goes. Cheers |
|
|
|
|
Show Posts
