somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
March 26, 2024, 11:58:39 AM |
|
Too many rejects with 2.3c mining 125.4, back to 2.2c and again 0 rejects. Kernel number is shown like "0019", not "19" like with older versions and because of this console window looks very messy with multigpu rigs -> info per gpu does not feet to one line like it was before, now it takes two lines, that second one is almost empty.
|
|
|
|
angelbbs
|
|
March 29, 2024, 08:10:27 AM |
|
v2.3c ZIL mining hashrate not available in API.
|
|
|
|
Sikkan666
Member
Offline
Activity: 240
Merit: 11
|
|
April 29, 2024, 09:40:51 AM |
|
hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)
Tried to downgrade version but all I get is this:
[INFO ] Mining fee set to 2.00% miniZ<144,5>[22:0:00.0: 8176]: Selecting GPU#4[4] RX 5700 XT miniZ<144,5>[22:0:00.0: 8176]: Selecting GPU#5[5] RX 5700 miniZ<144,5>[20:0:00.0: 8176]: Selecting GPU#3[3] Pro W5700 miniZ<144,5>[00:0:00.0: 6003]: Selecting GPU#0[0] ASUS P106-100 miniZ<144,5>[00:0:00.0: 6003]: Selecting GPU#2[2] ASUS P106-100 [FATAL ] GPU[03]: cannot find kernelZ: gfx1010:xnack-[20] [INFO ] QUIT miniZ miniZ<144,5>[01:0:00.0:10015]: Selecting GPU#1[1] NVIDIA P102-100 munmap_chunk(): invalid pointer /hive/miners/miniz/h-run.sh: line 20: 83320 Aborted ./miniZ $(< ${MINER_NAME}.conf) --logfile $MINER_LOG_BASENAME.log --telemetry 127.0.0.1:${MINER_API_PORT} --gpu-line
any clues? currently I have to use another miner on the w5700 that is slower
|
|
|
|
miniZ (OP)
|
|
June 15, 2024, 03:44:02 PM |
|
Karlsenhash does not work miniz --nocolour --par=karlsen --url karlsen:***@kls.2miners.com:2020
Previous 2.2c works fine
Hi angelbbs, We're about to make a new release Things should be resolved now. Do let us know if, then you fin any issue. Thanks! Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
June 15, 2024, 03:46:48 PM |
|
Hello After update to v2.3c report hrate it is broke, mest up aka instead report a ~37 Sol/s it report ~19 Sol/s, command line it same for bouth, nothing change :loop .\miniZ.exe --url=X@equihash192.eu.mine.zpool.ca:2192 --pass c=X,zap=YEC/ZCL/ZER --par=192,7 --pers=auto --cuda-devices=0 --coolui --list-modes --show-mode --telemetry=0 --server-share --log --log-period 30 --log-delay 30 timeout /t 5 goto loop
cheers im seeing same as sir_blacks. Cut hashrate by like 1/2. Rolled back to 2.2 and full hash again.
Please fix…its nice to just leave miner on latest version.
Hi sir_blacks, miner29, Thank you for your messages. We're about to release a new version. Could you check it out and let us know if issue persists? This should be resolved now. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
June 15, 2024, 04:14:14 PM |
|
equihash 144,5 for BTG has huge hashrate drop vs 2.2c.
Hi arch111, Could you check the new version and let us know if this is ok now? If not let us know which GPU are you using. Maybe, pool also. Thanks! Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
June 15, 2024, 04:35:14 PM Last edit: June 15, 2024, 10:49:52 PM by miniZ |
|
Hi everyone,A new miniZ version v2.4d is out with improvements for KarlsenHash and PyrinHash algorithms. Also, added AMD support for Equihash 192,7, PyrinHash, and KarlsenHash algos! Maybe there is still some room for improvement on the dual mining. Let us know about your favorite algo combinations and we will have a look!Please find miniZ version v2.4d @ Download page
Changelog: * Improved hashrate for PyrinHash and KarlsenHash. Up to 7%, this depends on GPU.* Added support for PyrinHash algo - Pyrin (PYI), for AMD. Fee: 0.8%.* Added support for KarlsenHash algo - Karlsen (KLS), Nexell-ia for AMD. Fee: 0.8%.* Added support for 192,7 algo, for AMD. * Added new option -pl auto. miniZ will find best power when optimizing for efficiency. * Major improvements for Equihash dual mining.* Fixed issues with dual mining with k1pool. * Fixed EthashB3 (HYP), for AMD. * Added support for RX 7800 XT, AMD GPU.* Fixed invalid shares in 192,7. * Added ZIL stats to telemetry. Ex: localhost:20000/zil * Added --minimal, --hideclocks options for minimal console log output. * Fixed JSON getsats for dual mining. * Removed support for obsolete Kepler GPUS. * Removed support for kHeavyHash algo. * Few minor fixes. *** Thank you all for the feedback! ***For additional information check our Usage or FAQ pages. Download miniZ latest version here. Follow us on X/TwitterHappy dual/triple mining!
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
June 15, 2024, 07:56:17 PM |
|
Too many rejects with 2.3c mining 125.4, back to 2.2c and again 0 rejects. Kernel number is shown like "0019", not "19" like with older versions and because of this console window looks very messy with multigpu rigs -> info per gpu does not feet to one line like it was before, now it takes two lines, that second one is almost empty.
Hi somaton, Could you check the new version and let us know how it goes? It should be working well now. Thanks! Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
June 15, 2024, 08:02:40 PM |
|
v2.3c ZIL mining hashrate not available in API.
Hi angelbs, You can check ZIL stats: curl 'localhost:20000?/getstat"id":2' -s|jq You can now also check ZIL stats on localhost:20000/zil Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
miniZ (OP)
|
|
June 15, 2024, 08:11:21 PM |
|
hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)
Tried to downgrade version but all I get is this:
any clues? currently I have to use another miner on the w5700 that is slower
Hi Sikkan666, Sorry, this is not yet resolved in the new version. Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3. Let us know if this helps. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
June 16, 2024, 09:48:13 AM |
|
Hi, did not had time to check 125.4 with new version, but tried 125.4 + pyrin and it does not work. Is it me or something else?
************ miniZ v2.4d ************ Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1 Driver: 528.49 Algo: [Equihash125,4] [smart-pers] Pool#0: user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof] Pool#1: user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin] Logging:: file[miniz-pyrin-125.4-nice.log] period[10] delay[0] Optimisation: ocX[0] Temp. limit: [90 C] [INFO ] Mining fee set to 2.00% [INFO ] Applying clocks to GPU[00] core offset= +240MHz mem offset= +1MHz power= 0W gpuclk=1560 miniZ<Equihash125,4+pyrin>[18:0:00.0: 9087]: Selecting GPU#0[0] Gigabyte RTX3080 Gaming OC 10G
It is crashing right after selecting gpu. Tried with 2.3c and it does start mining, but it is mining 125.4 only and does not show anything about pyrin?
|
|
|
|
miniZ (OP)
|
|
June 17, 2024, 11:33:31 AM |
|
Hi, did not had time to check 125.4 with new version, but tried 125.4 + pyrin and it does not work. Is it me or something else?
************ miniZ v2.4d ************ Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1 Driver: 528.49 Algo: [Equihash125,4] [smart-pers] Pool#0: user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof] Pool#1: user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin] Logging:: file[miniz-pyrin-125.4-nice.log] period[10] delay[0] Optimisation: ocX[0] Temp. limit: [90 C] [INFO ] Mining fee set to 2.00% [INFO ] Applying clocks to GPU[00] core offset= +240MHz mem offset= +1MHz power= 0W gpuclk=1560 miniZ<Equihash125,4+pyrin>[18:0:00.0: 9087]: Selecting GPU#0[0] Gigabyte RTX3080 Gaming OC 10G
It is crashing right after selecting gpu. Tried with 2.3c and it does start mining, but it is mining 125.4 only and does not show anything about pyrin?
Hi somaton, Thanks for the message. Could you paste here your command line? Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
June 17, 2024, 02:58:20 PM |
|
Here: miniZ.exe --url=btc.5950x@zelhash.auto.nicehash.com:9200 --url2=btc.5950x@pyrinhash.auto.nicehash.com:9200 --pass=x --priority=1 --telemetry=0 --minimal --logfile miniz-pyrin-125.4-nice.log --gpuclock=1560 --fanspeed=42 --fantemp=65 --gpuoffset=240 lets hope it can be fixed fast
|
|
|
|
miniZ (OP)
|
|
June 17, 2024, 07:30:43 PM |
|
Here: miniZ.exe --url=btc.5950x@zelhash.auto.nicehash.com:9200 --url2=btc.5950x@pyrinhash.auto.nicehash.com:9200 --pass=x --priority=1 --telemetry=0 --minimal --logfile miniz-pyrin-125.4-nice.log --gpuclock=1560 --fanspeed=42 --fantemp=65 --gpuoffset=240 lets hope it can be fixed fast Hi somaton, Thanks for the information. We were able to run your command line... Could it be that it didn't crash that it's just taking a bit longer to start? Could you also try with stock settings, just to discard some issue with OCs? Let us know if this helps. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
June 17, 2024, 10:11:21 PM |
|
Of course i tried without any oc settings. Like i said, previous version starts fine with same command line (without --minimum), but this new one not. I run miniz from bat file with loop command, and it will open one more window for miniz, but it will be closed right after miniz it triying to select gpu, then again open new window and will not stop until bat with loop command is closed manually.
Tried with other rig, same story - exiting right after selecting gpu:
************ miniZ v2.4d ************ Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1 Driver: 528.49 Algo: [Equihash125,4] [smart-pers] Pool#0: user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof] Pool#1: user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin] Logging:: file[miniz-pyrin-125.4-nice.log] period[10] delay[0] Optimisation: ocX[0] Temp. limit: [90 C] [INFO ] Mining fee set to 2.00% [INFO ] Applying clocks to GPU[00] core offset= +240MHz mem offset= +1MHz power= 0W gpuclk=1560 miniZ<Equihash125,4+pyrin>[19:0:00.0: 7113]: Selecting GPU#0[0] ASUS GeForce RTX 3070
mining just pyrin or 125.4 is working fine, but not together.
|
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
June 25, 2024, 08:59:57 PM Last edit: June 25, 2024, 09:13:48 PM by somaton |
|
and still too much stales/rejects with 2.4d like with 2.3c when mining 125.4, so, back again to 2.2c
|
|
|
|
miniZ (OP)
|
|
June 29, 2024, 01:35:55 PM |
|
and still too much stales/rejects with 2.4d like with 2.3c when mining 125.4, so, back again to 2.2c Hi somaton, Thank you for the feedback. Could you try adding --stale=200 (or maybe 300) to your command line and see if it helps? Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
Sikkan666
Member
Offline
Activity: 240
Merit: 11
|
|
July 03, 2024, 07:25:06 PM |
|
hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)
Tried to downgrade version but all I get is this:
any clues? currently I have to use another miner on the w5700 that is slower
Hi Sikkan666, Sorry, this is not yet resolved in the new version. Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3. Let us know if this helps. Cheers hey, it actually started mining on the card.. crashed after a few mins but that was probably due to a bad OC for this algo.. and also, it had the same speed as the other cards what does mode 22 do?
|
|
|
|
miniZ (OP)
|
|
July 05, 2024, 02:41:18 PM |
|
hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)
Tried to downgrade version but all I get is this:
any clues? currently I have to use another miner on the w5700 that is slower
Hi Sikkan666, Sorry, this is not yet resolved in the new version. Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3. Let us know if this helps. Cheers hey, it actually started mining on the card.. crashed after a few mins but that was probably due to a bad OC for this algo.. and also, it had the same speed as the other cards what does mode 22 do? Hi Sikkan666, Thanks for your message. In some cases you may want to select a specific mode/kernel for miniZ to run in your GPU. In this case --mode3=22 selects mode/kernel 22 to run on GPU3. (miniZ was not selecting the correct kernel for your GPU.) It is possible that some kernels do become unstable and others do not, when applying OCs. Have you tried adjusting OCs? In any case, we appreciate that you leave us a message if a mode is dramatically unstable also after trying with stock settings. Cheers
|
miniZ is a fast and friendly Equihash & ProgPoW Cuda miner. Equihash algorithms: <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>. Ethash and Etchash. ProgPoW (KawPoW, ProgPoWZ, vProgPoW) More information: miniz.cc * Follow us: bitcointalk.org ~ Twitter
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
July 08, 2024, 10:53:47 AM |
|
Hi somaton,
Thank you for the feedback.
Could you try adding --stale=200 (or maybe 300) to your command line and see if it helps?
Cheers
Hi, i tried --stale=300 and it does not help, still too much rejects compared to 2.2c.
|
|
|
|
|