 Show Posts
|
|
Pages: « 1 2 [3]
|
Anyone else have a lot of issues with Nicehash lately?
No. All works fine. I have some issues with shares not acceptet to the eu pool. Everything is fine to ethermine. |
|
|
|
|
Anyone else have a lot of issues with Nicehash lately?
|
|
|
|
|
Thanks man. Awesome.
Asus RTX 2070 Strix OC is doing ~ 8.3 G/s @ 137W
|
|
|
|
|
Excellent. The RTX 2070 Super is passing 9. Other cards performing very well as well.
|
|
|
|
I own now 2x Sapphire 5700XT. I have used Adrenaline 1.9.2.2 and classic setting posted on this topic; -tt 62 -cclock 1300 -cvddc 800 -mclock 900 -hstats 2 it gives 52,x MH but it fails in minutes. I have tried lower or bigger -cvvdc between 750 and 900mV, even lower/higher -tt, it fails randomly showing 0.00MH. I tried also to keep memory stock (875MHz), it fails randomly, same problem and miner stays locked, mouse too, just hard reset works. When I have removed -hstats 2 command, keeping just -tt 62 -cclock 1300 -cvddc 800 -mclock 900, it worked fine 12 hours but I just tried last sollution: I have deleted all commands -tt 62 -cclock 1300 -cvddc 800 -mclock 900 -hstats 2 from ,bat file and I have used just Msi Afterburner 4.6.2 beta 2 https://www.guru3d.com/files-details/msi-afterburner-beta-download.html wich full controls power limit, voltage and frequency, now I left voltage unattended (1187mV), GPU frequency stock, memory increased at 900MHz and power limit down to -43 or even -44%. Works flawless. It looks as the much commands gived to the miner (tt 62 -cclock 1300 -cvddc 800 -mclock 900 -hstats 2), especially -hstats 2, gives driver error (atimtag.dll) and locks the miner... So, I keept settings as in picture attached and .bat file as simple, without extra commands ex: PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal your wallet adress.rig name, and is rock solid. https://i.postimg.cc/RhtKXjtg/Best-settings.jpgSeems to be these issues are related to nicehash (even if that is not mentioned here). |
|
|
|
Performance Video in my testing so far: 481mh @ 1062w for a 8x 5700 XT rig. https://twitter.com/BitsBeTrippin/status/1174169921250631682But probably going to settle for 474mh @ 1058, as few of the cards not showing 100% stability with settings. Once I see it clean for 24h will post how I got there in video. Again, please share your stable settings checked vs the pool I run like this 100% stable: -tt 58 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 910 -amd -mode 1 -clKernel 1 -clNew 1 |
|
|
|
In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?
Miner crashing on cuckarood29? Have you tried on stock GPU settings? Btw update for cuckarood29 almost done, it will yield +10% performance grow If you use the cuckaroo31 algorithm for mining GRIN coin, then I have the same problem. When I using the cuckaroo29 algorithm everything works fine. The RTX 2070 Super was a bit dissapointing on BEAM on the same wattage (+5%). GRIN not to bad, passing 8 G/s. Any news on the new version? |
|
|
|
Performance Video in my testing so far: 481mh @ 1062w for a 8x 5700 XT rig. https://twitter.com/BitsBeTrippin/status/1174169921250631682But probably going to settle for 474mh @ 1058, as few of the cards not showing 100% stability with settings. Once I see it clean for 24h will post how I got there in video. Hi and congrats! Share some settings for cards? Please sharing the settings. I'm currently @ 1215W @ the Wall for my 8x RX 5700. Miner is reporting 900W. Getting about 425 MH/S (Which is great). For the moment I just keep my settings simple: -cvddc 750 -cclock 1300 -mclock 920 -amd -mode 1. Geeting another card tomorow to play with. This -openclLocalWork is not easy to figure out yet; can not have these incorrect shares However, miner is unstable. Need more testing. |
|
|
|
In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?
Miner crashing on cuckarood29? Have you tried on stock GPU settings? Btw update for cuckarood29 almost done, it will yield +10% performance grow AS many time before it was a riser issue, and not even on the cards tested. Very strange that it only affected GRIN. Looking fwd to that new version, a game changer! I have the same with mining beam on a rtx 2080 rig, almost instantly gpus crash and are dropped. Only way to recover is a cold boot. MTP is running fine for weeks. Think I will have to take a look at the risers aswell. It's an odd world. On another rig, the only coin not working was MTP. This I concluded was that there was not enought speed on the M2 Riser. With the message about increased GRIN speed, I just hade to order a RTX 2070 Super. Will it do 10 ... Currently minning @ 247.7 Gp/s with GMiner GRIN. |
|
|
|
In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?
Miner crashing on cuckarood29? Have you tried on stock GPU settings? Btw update for cuckarood29 almost done, it will yield +10% performance grow AS many time before it was a riser issue, and not even on the cards tested. Very strange that it only affected GRIN. Looking fwd to that new version, a game changer! |
|
|
|
|
In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?
|
|
|
|
|
Hello
Anyone else here that have tried with 8 RTX cards? When adding the 8 card, I will not run the fans on that card
(yes, I know it is very odd)
|
|
|
|
|
Have anyone else seen performance degradation using the latest (431.60) DCH driver for GTX 1070 (Or any DCH driver)?
I'm barly getting over 30 Mhs and have to increase power.
|
|
|
|
In one of my rigs, I get this problem that Windows get unresposive and slow. Have the error message unable to get fan speed - Unknown Error (999) as somebody reported before.
Tried lowered mem with no sucess and cards seems work in my test PC at 1000+ in mem OC.
Combo of GTX 1660 TI and RTX 2070.
Any ideas? Rig is working fine with other algos.
you will see at which card get fan speed error, go to afterburner that select that particular card, then you should see the clock speed is down in half, that's because you've overclocked it too much, back down a bit and restart your rig then it should be normal again It is radom which card reports first. Lowered all to 800, still same problem. |
|
|
|
|
In one of my rigs, I get this problem that Windows get unresposive and slow. Have the error message unable to get fan speed - Unknown Error (999) as somebody reported before.
Tried lowered mem with no sucess and cards seems work in my test PC at 1000+ in mem OC.
Combo of GTX 1660 TI and RTX 2070.
Any ideas? Rig is working fine with other algos.
|
|
|
|
|
