 Show Posts
|
|
Pages: [1]
|
|
For first, thank you for help!
Second, ofc everyone is smart now.
Third, chill out, it's not your miners.. It isn't something like personal folder, photos.. Somebody hacked me, and what? Now it's everything OK, miners work for me, IP hidden.
|
|
|
|
Ou talk with me english please  , its too complicated for me.. HW factory reset we can find in inno manual - Press IP button for +- 8 sec.. So will see how long will asics stable - i waiting for 20:00 |
|
|
|
|
So I got physically there. HW factory reset via IP button fortunately works - the hole on sd card comes to me that it is empty. After reset stock login works, so I upgraded fw and tried to log in through root ssh and it works too.. public ip I changed to local, rather than changing the root password. I'll see in the 20:00 what happen.. I hope there was no hidden hack or something...
BTW Innosilicon - the worst support in the world, nothing and nobody helped me, only the bullshit about the engineers looking at it, etc.. the response crazy, the answers out of the way and very simple, solved the shit!!! through the teamviewer they only tried what I wrote 1000X to them that they could not, did not come up with any solution, they did not mind me, they were reluctant to provide information how to upload fw from sd card, etc etc...
|
|
|
|
|
Ok, I send them this discussion too. Is Sunday, nobody talk with me, I must wait.
Do you think Hw factory reset will not help? I do not know if I have an SD card slot - the hole is, but probably empty. When I go there, I'll look at it.
|
|
|
|
Ok, iam from Europe too  |
|
|
|
with your consent I will try with WinSCP on port 22 on that ip-address that you had in the picture ?
do you give your consent ?
yes, try it please, for questions above I answer tommorow, iam on phone now.. Both say me access denied.. Can you pm me ur Skype for faster communication? |
|
|
|
check with Innosilicon for firmware to flash onto SD-card and howto restore factory settings ! BUT... Could it be that someone hijacked the calls from web browser. perhaps it's in the router or something with redirection or so? when you get login page. if you rightclick and choose "view source" it should look like this: <!DOCTYPE html><html lang="en"><head><meta charset="utf-8"><meta name="viewport" content="width=device-width,initial-scale=1,shrink-to-fit=no"><meta name="theme-color" content="#000000"><link rel="manifest" href="/manifest.json"><link rel="shortcut icon" href="/favicon.ico"><link rel="stylesheet" href="css/bootstrap.min.css"><link rel="stylesheet" href="css/fontawesome-all.min.css"><link rel="stylesheet" href="google_fonts/font.css"><title>AsicMiner</title><link href="/static/css/main.1a23456b.css" rel="stylesheet"></head><body><noscript>You need to enable JavaScript to run this app.</noscript><div id="root"></div><script src="js/jquery.min.js"></script><script src="js/bootstrap.min.js"></script><script></script><script type="text/javascript" src="/static/js/main.a12bcde3.js"></script></body></html> PS. I have changed the numbers and letters in these two files: main.1a23456b.css and main.a12bcde3.js BUT other then numbers and letters in those 2 filenames you SHOULD get exactly the same as above and nothing else at login page! <!DOCTYPE html><html lang="en"><head><meta charset="utf-8"><meta name="viewport" content="width=device-width,initial-scale=1,shrink-to-fit=no"><meta name="theme-color" content="#000000"><link rel="manifest" href="/manifest.json"><link rel="shortcut icon" href="/favicon.ico"><link rel="stylesheet" href="css/bootstrap.min.css"><link rel="stylesheet" href="css/fontawesome-all.min.css"><link rel="stylesheet" href="google_fonts/font.css"><title>AsicMiner</title><link href="/static/css/main.7f78466b.css" rel="stylesheet"></head><body><noscript>You need to enable JavaScript to run this app.</noscript><div id="root"></div><script src="js/jquery.min.js"></script><script src="js/bootstrap.min.js"></script><script></script><script type="text/javascript" src="/static/js/main.a82afcc3.js"></script></body></html> |
|
|
|
this is too complicated for me, my english is basic and IT knowledge too.. |
|
|
|
|
hmm speed inceases, that adress isnt my... seems like i have been hacked, but for 3.5h/day???
second miner have different adress (have 2) f2pool too... next worker have number 22469 on both adresses
factory hw reset should be by press IP button for 8 sec (search on internet).. so i will try as soon as I can
|
|
|
|
|
yes, sry, please edit quote..
edit. I do not have a paid version, I like to pay someone to fix the problem, but I do not want to buy it if I do not know it will help.
|
|
|
|
|
Hello, please have anybody (maybe updated with new firmware) ssh root psw for A9? I tried all on this forum :/
|
|
|
|
|
Lol connect with Awesome miner works... So i need learn ssh for update/factory reset, because login still not working...
It have 72 temp.. its ok? But hashrate is great 61/ 56avg
with putty: Access denied after enter psw on port 22.. tried also admin/my psw, admin/admin, guest/guest, root/blacksheepwall or innot1t2 or t1t2t3a5, all denied
and now is 20:00 and awesome miner status disconnected.. so i must wait to 23:30 for mining, BUT ping for IP of miner works...
when miner down, he sometimes connect to f2pool on that adress t1VN9EjK1hWLBmcQuA6hGzhaVohFrnVihDk (its not my...) but with very low speed..
|
|
|
|
Ok, I will try everything.
Anyway I can't log to them locally too, without internet, directly on same router.. All in same room on same router.. I will post my solution, If I repair it.
By the way: have you tried a program like awesome miner http://www.awesomeminer.com/2 machines can you have with the free license !!! to see if you can see them and or get som response from them! If they don't have internet I think they will reboot after a while so perhaps not easy find problem if they don't find internet ! ! ! Have you tried to install a new web-browser on your computer and login with that one and reset of router/orwhatever at home so it's not a local problem at "home" or tried a new computer which never logged into the A9's before ? Best of luck! I tried more pcs, miners have internet - web login page load, this working (from everywhere), but after click on login it freezes.. Awesome miner i tried with gpu mining not asic.. I will try. |
|
|
|
|
Ok, I will try everything.
Anyway I can't log to them locally too, without internet, directly on same router.. All in same room on same router.. I will post my solution, If I repair it.
|
|
|
|
Thank you so much, I will try it, and learn.. I will post my results.. I have 5x A9 zmaster and all have same problem.. Z9 mini is ok.. Look at graph..   I have to say that it was stable on the slush pool, but it is 80% profitable. But now there is the problem that - I will not do anything about it, so first try to log in, then try different options. |
|
|
|
Hello, pelase can anybody help me? Ideally with ssh knowledge.. Official support comes to me that he does not know what I'm talking about.. 1. I have a public IP address assigned to my miners (they are in external "warehouse" of IT company), so that I can remotely manage them but after a while the logon stops functioning.. Maybe few days working well.. Even did not help HW reset, shutdown, power on, etc.. The login page is loaded but after clicking on login nothing is happening but miners obviously minning when I check them on the pool page, BUT - point 2 2. when mining on nicehash my miners always at 20:00 - 23:30 all fall, then try to start.. what it is  ? of course I can not change the pool when I can not log in, cant update firmware (i have A9 b29+_20180911_095547, new is A9 b29+_20181009_094439) .. z9 mini works without any problems how to login (also remotely) also mining.. Can anybody help me with ssh? I need restart them, update firmware and understand what's going on :-(... well, complex situation! do each Asic miner have its own PUBLIC ip-address ? ? ? Because if so then anyone can log in to your A9 as root via SSH. 1. SSH into A9: user: root password: blacksheepwall in /var/www/webif/api/Controller/MinerController.php you will find among other code snippets find this: /* * Reset to factory reset deleting all the content of /config and then reboot the miner */ public function factoryResetAction() { global $config; header('Content-Type: application/json'); // shell_exec('sleep 4; rm -rf '.$config["configDirectory"].'/*;/bin/systemctl reboot >/dev/null 2>/dev/null &'); shell_exec('sleep 4;cd '.$config["configDirectory"].';ls | grep -v "author.au" | grep -v "cg.conf" | xargs rm -rf;/bin/systemctl reboot >/dev/null 2>/dev/null &'); echo json_encode(array("success"=>true)); } Perhaps someone else here will translate this into something you can run from SSH to make a factory reset: 2. Don't mine on nicehash if you get that timeout !!! 3. Can you not login as guest ? user: guest password: guest Then perhaps its possible to run code snippet by opening up "page inspection" or something in web browser? Just an idea ! Good luck! Thank you for reply. Yes, each miner have own ip. Anyone can log in with ssh, if know ip, but what he get? Everytime I can control if they work for me, etc.. It's not server with personal informations, etc.. But you have right.. When will miners stable, I remake it. Thanks for login and psw, I will try it. I can't do anything now (can't change pool - can't login to miners). Guest same like admin - freez after click login without any error message.. Can you try it for me? I don't understand ssh too much. But I think, that pass was incorrect, but maybe I do something wrong.. IP is public, so we don't need TeamViewer for now. Please PM me, thanks. |
|
|
|
Hello, pelase can anybody help me? Ideally with ssh knowledge.. Official support comes to me that he does not know what I'm talking about.. 1. I have a public IP address assigned to my miners (they are in external "warehouse" of IT company), so that I can remotely manage them but after a while the logon stops functioning.. Maybe few days working well.. Even did not help HW reset, shutdown, power on, etc.. The login page is loaded but after clicking on login nothing is happening but miners obviously minning when I check them on the pool page, BUT - point 2 2. when mining on nicehash my miners always at 20:00 - 23:30 all fall, then try to start.. what it is ? of course I can not change the pool when I can not log in, cant update firmware (i have A9 b29+_20180911_095547, new is A9 b29+_20181009_094439) .. z9 mini works without any problems how to login (also remotely) also mining.. Can anybody help me with ssh? I need restart them, update firmware and understand what's going on :-(... |
|
|
|
|
