It;s prohashing related. I actually found what's the problem so it will be fixed in the next release
When you will release next hf? I tried to insert static difficulty values 512 and 64 but problem is still here. Please fix this problem as soon as possible, my D3 miners switching pools 1000 times per day.
|
|
|
Finally someone else to notice this problem
|
|
|
Blissz sorry if I interrupting you, but can you please fix basic things on your FW? I flashed again last version 02.12 FW on all miners last night. Now I dont have previous problem when part of D3 miners hashing on backup pool every 1 hour, current problem is that more than half D3 miners doing hashing on backup pool without reason, primary pool is alive and still more than half miners are on backup pool.
|
|
|
I dont have access to my devices, this is pool stats. I will send log later. I useing Prohashing for primary and Zpool for backup pool. This is my backup pool. Miner software shows that currently all miners are on prohashing pool. https://imgur.com/a/TJcXL
|
|
|
There is still a problem (with new version of FW) when some miners go to backup pool every 1 hour.
|
|
|
I pretty much run my machines clocked down to save power. 16,400 @ 800W
Today I thought I would fiddle around a bit.
Running at 19,300 @1100w
So its an increase of 18% in speed and 37.5% increase in power consumption. Its not worth it!.
What is your setup? I set 450mhz/"lowest" power consumption and getting 16.5 ghs/860w. I just set global settings, do I need to set each board to get lower consumption?
|
|
|
There is some bug with pools. Part of my miners hashing on backup pool without reason, primary pool working fine, how to fix this? Every one hour few miners start to hashing on backup pool, than come back to primary pool?
The latest beta posted a few pages back contains a fix for this, but a new stable will be released today / tommorow containing the fix as well I updated Bitmain firmware on 1 D3 device which making mi problem with dead board. Why after flashing Bitmain FW I still have Blissz stamp on top left corner? I already spoke with bitmain i need to send them device on chio replacement? Will this void my warranty, why I cant just install Bitmain FW back? It's your browser cache. Just press ctrl + f5 on your browser and it looks like normal again Huh, thx for tip . Can I normally send D3 device back on warranty? They can not see that I used custom FW, after I flash Bitmain fw and void my warranty?
|
|
|
There is some bug with pools. Part of my miners hashing on backup pool without reason, primary pool working fine, how to fix this? Every one hour few miners start to hashing on backup pool, than come back to primary pool?
The latest beta posted a few pages back contains a fix for this, but a new stable will be released today / tommorow containing the fix as well I updated Bitmain firmware on 1 D3 device which making mi problem with dead board. Why after flashing Bitmain FW I still have Blissz stamp on top left corner? I already spoke with bitmain i need to send them device on chio replacement? Will this void my warranty, why I cant just install Bitmain FW back?
|
|
|
There is some bug with pools. Part of my miners hashing on backup pool without reason, primary pool working fine, how to fix this? Every one hour few miners start to hashing on backup pool, than come back to primary pool?
|
|
|
His firmware is based on Bitmain's latest firmware, he did this many days ago.
Hmm, strange, I just updated new blissz firmware, comsuption is reduced, but I had already 1 dead board. Last 5 days after I installed last Bitmain firmware I had 0 hashboards dead until now.
|
|
|
Thank you for info, so I can set "lowest" voltage options, and than I should see how far I can go with clock, before I start do get HW errors? Lowest voltage can works on some devices on 450 mhz clock? Can I damage board if miner works on very low voltage on some higher clock than 400mhz, but without errors? Is it "dead board" problem fixed, no more dead boards after some time? If still exist this problem blissz should use this Bitmain last FW: https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066EWorks fine for now on testing device, 425mhz, 800w, 16ghs
|
|
|
"Lowest" voltage is value 1, right? I tried lowest voltage and 412mhz clock and works. Can lowest value can work with higher clock, for example 450mhz? Why blissz wrote lowest voltage on 400mhs, when clock can bi higher?
|
|
|
It happens that miners in different batches have different power consumption. For example, first batch od D3 miners have 980w power consumption, while last batches have 1200+w consumption. That is why I asking....
|
|
|
What is best miner hashing/setup for 950w power consumption? Can I get 17-18ghs on 950w?
|
|
|
Hi guys need some help , I planing to order some S9 devices. I would like to know what is real power consumption of S9 13,5Ths miners? Can I connect 2 x S9 on Delta 2400w 92+ platinum power supply- Delta DPS-2400AB?
|
|
|
I have 15 coupons to sell (-125usd for Bitmain asic miners), 65$ each, accepting payment in dash, btc, ltc, zec, bch, eth. PM for more information's.
|
|
|
I have 15 coupons to sell (-125usd for asic miners), 65$ each, accepting payment in dash, btc, ltc, zec, bch, eth. PM for more information's. Sold
|
|
|
I have 15 coupons to sell (-125usd for asic miners), 65$ each, accepting payment in dash, btc, ltc, zec, bch, eth.
|
|
|
I've got Bitmain coupons ($125 off for all miners). PM me if you're interested. I'll take 1/2 value.
|
|
|
|