|
I set frequency to 456m and fan to 70% on problematic D3 device, for now everything works fine - 16 ghs hashrate. What is max D3 fan speed, 4500 rpm?
|
|
|
|
One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.
check fan RPM __________?? check if the hashboard status is all zero or having XXXXX in any of it check the temp on PCB __________? check if HW error too much ______? in my case, one of the heatsink fell off... i reattached it back. So far so good. using 3M thermal tape. Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much  . 75C is too hot. set your frequency to 456m and fan to 70% your miner will now hash at 16000 ghs ,but your temps will drop and error rate becomes almost 0. Also try moving miner to cooler area if possible. This should solve your problem unless its too late and board is damaged. Make sure to monitor miner for a while after changing settings to make sure it has become stable. My bad, I typed Chip temperatures instead of PCB... Currently temperatures are fine for all miners. Chip temperatures are from 60-75c. PCB temperatures are around 55c. I had 353433 HW errors on miner which making me problems. What is max rpm 4500? You think I should decrease fq 456 and decrease fan to 70%? I can try, but temperatures are not problem here. |
|
|
|
One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.
check fan RPM __________?? check if the hashboard status is all zero or having XXXXX in any of it check the temp on PCB __________? check if HW error too much ______? in my case, one of the heatsink fell off... i reattached it back. So far so good. using 3M thermal tape. Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much . |
|
|
|
|
One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.
|
|
|
|
|
Guys are you sure that Zpool is most profitable pool?
I connected D3-s on Zpool and for 14 hours, one D3 device (17 ghs) made 29,4 USD. That is lower than profit on regular Dash pool if we use coinwarz calculator?
|
|
|
|
|
I connected D3-s on Zpool and for 14 hours, one D3 device (17 ghs) made 29,4 USD. That is lower than regular Dash pool?
Also I still waiting on payment and my balance is above 0.015.
|
|
|
|
Anyone got D3 miners - batch 2? Miner version is same like first batch - G17/950w? What is most profitable pool in this moment for X11 algo mining, Prohashing or Nicehash?
D3 miners are louder than L3+ or not?
yes, its a lot louder. I would say equivalent or slightly louder than the S9.. That's bad news, I expected to be equal not louder than L3 . Anyone tried to decrease fan speed on D3, temperatures are still ok? |
|
|
|
|
No. We had Batch 1 (delivery date 15-25 Sept) and Batch 2 scheduled delivery - 18-25 Sept. Price was same for both batch 2700 usd.
|
|
|
|
|
Anyone got D3 miners - batch 2? Miner version is same like first batch - G17/950w? What is most profitable pool in this moment for X11 algo mining, Prohashing or Nicehash?
D3 miners are louder than L3+ or not?
|
|
|
|
|
Hi guys,
I expecting some X11 miners to arrive. Can someone tell me which pool is most profitable for mining,Prohashing or something else? Thx in advance.
|
|
|
|
|
Which pool is most profitable for D3 devices. Prohashing or something else?
|
|
|
|
Guys, can someone tell me (experienced one  ), can 1200W Seasonic SSR-1200GD PSU handle Antminer D3? In my country is impossible to buy 1300-1600w PSU. |
|
|
|
|
How many hashing boards have one D3 device? If have total 4 boards, does every board have 300w power consumption? 750w g2 should be strong enough for 2 boards?
|
|
|
|
|
Does anyone know, can EVGA 1300 G2 handle Antminer D3 or i must find some stronger 1600w PSU?
|
|
|
|
@Searing Guys from china should help to resolve scam/not scam problem  . I think this is try for revenage of Innosilicon through scam news. Bitmain destroyed their sale of A4 Scrypt dominator, after they announced L3+. Now they just trying to hurt Bitmain somehow. For A5 X11 Asic, they need lot of R&D and they do not have capacity and money for such thing. They needed 2 years to develop A4 dominator which was 2 times weaker than L3+, also for higher price.... Difficult will go a lot before first D3 batches arrives... You don't know whether or not they were developing an ASIC for X11 beforehand, though, do you? Perhaps they were already close to finishing it and just decided to announce their miner right after Bitmain did. You also don't know what kind of budget they have and what they can pull off. Whole lotta assumption and little fact. You should know that Innosilicon had money problems to finish R&D and production costs for A4 dominator device (and for lot more other devices). A lot of people help them to finish project with their orderds and imagine Innosilicon did not respected that fact.They promissed that devices will be delivered aproximately 1 month after payment and they deliver devices 5-6 moths behind scheduled date, in same time when Bitmain stared to sell 2 times more efficient and better miners for better price. So they screwed their loyal customers. You can make conclusion by yourself what budget they have and how strong they are. They fired news regarding X11 miner, 2 days after Bitmain released D3 batch. They (Innosilicon) usualy promotoing their devices on mid stages of developing, because they need preorder donations to finish R&D and production costs (because they are not even close to Bitmain, I dont promoting Bitmain, but this is fact).... We can make bets (few btc-s) scam or not scam if u have balls . Also 750w comsuption for 30 ths, telling a lot of things. You are still green mate in this business no offense . |
|
|
|
@Searing Guys from china should help to resolve scam/not scam problem . I think this is try for revenage of Innosilicon through scam news. Bitmain destroyed their sale of A4 Scrypt dominator, after they announced L3+. Now they just trying to hurt Bitmain somehow. For A5 X11 Asic, they need lot of R&D and they do not have capacity and money for such thing. They needed 2 years to develop A4 dominator which was 2 times weaker than L3+, also for higher price.... Difficult will go a lot before first D3 batches arrives... |
|
|
|
|
Is there any test of D3?
D3 should be more louder than l3+?
|
|
|
|
|
Guys dont hype D3 so much it is too early for any forecast. Dash difficulty is very low at this moment, Bitmain with their large production can pump difficulty 10 times until September if they set 100% producing capacity on D3.
Another interesting fact is that they do not accept DASH payment, on another words you can expect that Dash price will go down next months, plus difficult bomb is unavoidable. See LTC example, after Bitmain started to accept LTC payments for L3+,that is indicator that LTC will be stable and constantly pumped in next period, you can see that LTC is still in uptrend.
|
|
|
|
Price is doubled for a short time,someone collecting rabbits . |
|
|
|
|
Show Posts
