be careful, dont make too big pumps
we will see bottom price soon, my guess is 100+ satoshis ( i have never been wrong)
this is just early days of coins life span
big raise will come later, maybe some months to go
calculated value of this coin is out of roof, do your math and see where it will end
if the dev keeps on, and makes things work this has some great potential in future
but im not feeling fine when there is only one dev.. until more devs come to board..
No worries i'm not upping that mutch btc  Aargh, Waiting for new work from Pool 0 no accepted for 10 minutes from nonce pool. How about some p2pool love people ? gimme code and i'll host |
|
|
|
|
For some weird reason i now have to run the exe as an admin and have to re download the blockchain.
I see how it goes when resynced.
|
|
|
|
I cannot send any coins, transaction creation failed.....
Tried different amounts
Anybody any idea how to solve this ?
How do you create your transactions? I fill in the pay to, label and amount fields and click send. Also tried by creating an entry in my address book and selecting from there. |
|
|
|
|
I cannot send any coins, transaction creation failed.....
Tried different amounts
Anybody any idea how to solve this ?
|
|
|
|
|
Damn difficulty of this coin is rising very fast.
I'm transferring some btc to lazycoins to buy some.
|
|
|
|
|
My guncoin wallet stays 12 days behind, added all the nodes i could find.
I'll keep it open for the time being.
Anybody else got this ?
|
|
|
|
|
are there any plans to release p2pool code for this coin ?
this would really help the network.
stabilty of nonce pool is not very good, cgwatcher needs to reboot the miner from time to time when waiting to long for work.
Another exchange would be nice too.
|
|
|
|
Here is a new 3.7.6 BETA version of cgminer-khchttps://github.com/kryptohash/cgminer-khc/releasesChanges since version 3.7.5 - Fixes for the stratum pool submitted by nonce-pool (thanks for the patch). - Fixed the functions that calculate Diff which caused wrong diff values to be displayed and bogus found block messages. - Fixed one of the causes of HW errors on secondary GPUs (more fixes might be needed). Note: This version comes with an updated version of the OpenCL Kernel called kshake320-546.cl file. To avoid conflict with the old Kernel, place these new files in a brand new directory Great work on the miner, had to lower --shaders-mul to 7 to keep the second card below 90c, lost some hash there. my 2 280x are hashing @ 125 each |
|
|
|
|
This coin is a bumpy ride, but i like it
when will nonce-pool be back up ?
|
|
|
|
I have only 8 connections to the vertcoin network
Is there an updated node list ?
8 is a normal and expected number for non-nodes. I would like to run the windows p2pool software on my wallet so i was thinking a bit more connections would not hurt |
|
|
|
|
I have only 8 connections to the vertcoin network
Is there an updated node list ?
|
|
|
|
Mining @ 640kh/s with 270x right now... Anyone using 270x here? Just want to know what would be the peak hashrate of it  Please post your config, Thanks |
|
|
|
|
Still having trouble with the p2pool
2014-12-13 11:36:28.264000 > Error in DeferredResource handler:
2014-12-13 11:36:28.264000 > Traceback (most recent call last):
2014-12-13 11:36:28.264000 > File "p2pool\util\deferred_resource.pyc", line 24
, in render
2014-12-13 11:36:28.264000 >
2014-12-13 11:36:28.264000 > File "twisted\internet\defer.pyc", line 139, in m
aybeDeferred
2014-12-13 11:36:28.264000 >
2014-12-13 11:36:28.280000 > File "twisted\web\resource.pyc", line 250, in ren
der
2014-12-13 11:36:28.280000 >
2014-12-13 11:36:28.280000 > File "twisted\internet\defer.pyc", line 1237, in
unwindGenerator
2014-12-13 11:36:28.280000 >
2014-12-13 11:36:28.280000 > --- <exception caught here> ---
2014-12-13 11:36:28.280000 > File "twisted\internet\defer.pyc", line 1099, in
_inlineCallbacks
2014-12-13 11:36:28.280000 >
2014-12-13 11:36:28.280000 > File "p2pool\web.pyc", line 198, in render_GET
2014-12-13 11:36:28.280000 >
2014-12-13 11:36:28.280000 > File "p2pool\web.pyc", line 334, in <lambda>
2014-12-13 11:36:28.280000 >
2014-12-13 11:36:28.280000 > exceptions.TypeError: %x format: a number is requir
ed, not NoneType
Can anybody help me out ?
|
|
|
|
|
I'm getting 904kh/s per r9 280x card, sapphire standard clockspeeds
My second crossfire card runs 850 kh/s, anybody else got this ?
When i swap the cards result stays the same
Use
"xintensity" : "64",
"worksize" : "128",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-fan" : "100",
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"gpu-powertune" : "20",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "60",
"failover-switch-delay" : "60",
"gpu-platform" : "0",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30"
}
I'm getting 541kh/s per r9 270 non x @ 1160/1450
"xintensity" : "64",
"worksize" : "64",
"kernel" : "Lyra2RE",
"algorithm" : "Lyra2RE",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-fan" : "100",
"gpu-memclock" : "1450",
"gpu-engine" : "1160",
"gpu-powertune" : "20",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "60",
"failover-switch-delay" : "60",
"gpu-platform" : "0",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30"
}
|
|
|
|
guys, I even cannot start the sgminer. what am I doing wrong? I have two AMD 280X cards and I would like to test and configure my rig for lyra2re. sgminer.exe --kernel lyra2re -o stratum+tcp://ca.simplemulti.com:3374 -u username -p password --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 -I 13 -w 256 --gpu-dyninterval 7 --gpu-threads 2 --expiry 28 --scan-time 30 --queue 3 --gpu-memclock 1500 --gpu-powertune -20 --gpu-engine 1000 --gpu-fan 100 --gpu-vddc 1.100 Started sgminer 5.1.0 * using Jansson 2.7 clDevicesNum returned error, no GPUs usable All devices disabled, cannot mine! thank you try this { "pools" : [ { "url" : "stratum+tcp://pool.verters.com:4444", "user" : "xxxx.xxx", "pass" : "x" } ] , "xintensity" : "3", "worksize" : "256", "kernel" : "Lyra2RE", "algorithm" : "Lyra2RE", "shaders" : "0", "gpu-threads" : "2", "gpu-fan" : "100", "gpu-memclock" : "1500", "gpu-engine" : "1000", "gpu-powertune" : "20", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "60", "failover-switch-delay" : "60", "gpu-platform" : "0", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30" } |
|
|
|
I have some trouble with the p2pool code, i'm running the windows release on win 8.1 and the pool runs fine, but when i connect to the webinterface these errors pop up.
Anybody else got this ?
2014-12-11 10:04:31.802000 > Error in DeferredResource handler:
2014-12-11 10:04:31.802000 > Traceback (most recent call last):
2014-12-11 10:04:31.802000 > File "p2pool\util\deferred_resource.pyc", line 24, in render
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "twisted\internet\defer.pyc", line 139, in maybeDeferred
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "twisted\web\resource.pyc", line 250, in render
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "twisted\internet\defer.pyc", line 1237, in unwindGenerator
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > --- <exception caught here> ---
2014-12-11 10:04:31.802000 > File "twisted\internet\defer.pyc", line 1099, in _inlineCallbacks
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "p2pool\web.pyc", line 198, in render_GET
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "p2pool\web.pyc", line 334, in <lambda>
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > exceptions.TypeError: %x format: a number is required, not NoneType
2014-12-11 10:04:35.364000 P2Pool: 0 shares in chain (0 verified/0 total) Peers: 1 (0 incoming)
I think this happens because there are no shares in the sharechain yet. Once people start mining on the Lyra2RE P2Pool forks this error should go away. Thanks for the answer |
|
|
|
|
I have some trouble with the p2pool code, i'm running the windows release on win 8.1 and the pool runs fine, but when i connect to the webinterface these errors pop up.
Anybody else got this ?
2014-12-11 10:04:31.802000 > Error in DeferredResource handler:
2014-12-11 10:04:31.802000 > Traceback (most recent call last):
2014-12-11 10:04:31.802000 > File "p2pool\util\deferred_resource.pyc", line 24, in render
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "twisted\internet\defer.pyc", line 139, in maybeDeferred
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "twisted\web\resource.pyc", line 250, in render
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "twisted\internet\defer.pyc", line 1237, in unwindGenerator
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > --- <exception caught here> ---
2014-12-11 10:04:31.802000 > File "twisted\internet\defer.pyc", line 1099, in _inlineCallbacks
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "p2pool\web.pyc", line 198, in render_GET
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > File "p2pool\web.pyc", line 334, in <lambda>
2014-12-11 10:04:31.802000 >
2014-12-11 10:04:31.802000 > exceptions.TypeError: %x format: a number is required, not NoneType
2014-12-11 10:04:35.364000 P2Pool: 0 shares in chain (0 verified/0 total) Peers: 1 (0 incoming)
|
|
|
|
|
Does anybody have a good config for a r9 270 non x ?
Currently using cgminer.exe --kryptohash -o 127.0.0.1:38912 -u xxxx -p x --shaders 1792 --shaders-mul 8
and getting around 60 kh/s
|
|
|
|
I need some help here... Here is my setup and what the error is: setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --kryptohash -o 127.0.0.1:38912 -u username -p password --shaders 2816 --shaders-mul 8
server=1
rpcuser=username
rpcpassword=password
rpcport=38912
rpcconnect=127.0.0.1
And I get:
[2014-12-10 11:20:42] Started cgminer 3.7.5
[2014-12-10 11:20:42] Started cgminer 3.7.5
[2014-12-10 11:20:42] Probing for an alive pool
[2014-12-10 11:20:46] Pool 0 slow/down or URL or credentials invalid
I feel very stupid, since I should be able to do find out what's wrong. I've disabled firewall as well. EDIT: Is there any way of viewing current wallet "network status"? Like an ipconfig kinda thing for the core? I tried getnetworkinfo, but it only shows external (ISP IP). Or any other way to find out what's going on... your *.conf file is in the wrong place, needs to be in %appdata%kryptohash |
|
|
|
|
Show Posts
