 Show Posts
|
|
Pages: [1] 2 »
|
|
Hello,
i am interested buying used Innosilicon in GOOD condition.
I will pick up all machines myself, payment in cash or bank. LOCATION EUROPE ONLY!
Looking more than 100 units.
Reply to this thread, only serious seller please!
|
|
|
|
Hello, I am selling Battle.net accounts, all accounts are new, not logged in & cannot be reclaimed (fake name). You can enable SMS protection, you can change secret answer. I will send all details. Gifts: Pick any game/dlc listed & I will gift to your account. Payment: https://shoppy.gg/@digitalgames |
|
|
|
|
Already swapped hashboards and had same issue. Its a connect loose for sure, M3X's are unstable and restarts randomly for some reasons when it restarts there is a low chance that hashboard will work. Have been 2 days without working and today it restarted and started working, giving same ths like other boards.
Connect cable is stuck and cannot be removed.
|
|
|
|
|
Thank you for the help
Miner restarted automatically and all hashboards started working. It's a connect loose but I don't know how to deal with it!
|
|
|
|
|
I swapped to SM0/1/2 it was 0 ghsav. I tried it alone still same issue. Removed it and added other boards, other boards started working normally.
I have another M3X, can I try with that one or its dead?
|
|
|
|
Have you tried to reset the miner? Try this method hold the IP reporter/reset button for 15-20 seconds then after that access the IP again and set the pool properly make sure no extra character or space. Then test it again. More guides and troubleshooting guide from here https://bitcointalk.org/index.php?topic=3322593I have done it multiple times but same issue. Link does not help. I have clean up all hashboards and PSU also and same thing. This issue happened 3-4 weeks ago but after cleansing, the board started working. Also try swapping board positions. Be careful when handling MicroBT devices, as they can be quite delicate. I don't know if the M3x also uses the (data) "connection bridge" as the M10...
I swapped, before was SM1 with problem and now is SM2 so it's hashboard fault not control board or something. But it doesn't result as "Dead" in Status and board is hot. |
|
|
|
|
Hello,
Today one of hashboard M3X is not working, status of device is Alive but GHSav is 0.00..
First when it was not working with one restart it started again but now its not.
Also hashboard is hot, frequeency(avg) is 192, EffectiveChips 0, Temp1 32.00, Temp2 0.00
When an hashboard is dead, will it be "Dead" status?
Contacted seller and he told me is connect loose so I must re-plug control board but still is not working.
Please if someone can help me, I will really appreciate it. Please let me know if is needed more info!
|
|
|
|
|
So you think it's bad ? You still will get paid by NiceHash, right? I have downloaded firmware from Canaan Official site.
|
|
|
|
|
Problem with this miner was that can't mine on NiceHash.
I have updated firmware that supports NH but same issue.
|
|
|
|
Hello. Today I bought a Avalon 741 with controller. It restarts after 5-6 minutes, I have disabled firewall but same. Here is the System log: Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] Linux version 4.4.14 (buildbot@build.canaan-creative.com) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50019) ) #1 SMP Sat Jun 3 05:48:25 UTC 2017
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] cma: Reserved 16 MiB at 0x3a000000
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 0.000000] On node 0 totalpages: 241664
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 80582ec0, node_mem_map b988e000
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 0.000000] Normal zone: 1888 pages used for memmap
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.000000] [bcm2709_smp_init_cpus] enter (9480->f3003010)
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] PERCPU: Embedded 12 pages/cpu @b984e000 s17984 r8192 d22976 u49152
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0xf3cdbee0 smsc95xx.macaddr=B8:27:EB:CD:BE:E0 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Memory: 935496K/966656K available (3951K kernel code, 126K rwdata, 1416K rodata, 220K init, 368K bss, 14776K reserved, 16384K cma-reserved)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] .text : 0x80008000 - 0x80546060 (5369 kB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] .init : 0x80547000 - 0x8057e000 ( 220 kB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] .data : 0x8057e000 - 0x8059daac ( 127 kB)
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.000000] .bss : 0x8059daac - 0x805f9bac ( 369 kB)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000024] Switching to timer-based delay loop, resolution 52ns
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000204] Console: colour dummy device 80x30
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000845] console [tty1] enabled
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000888] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.000942] pid_max: default: 32768 minimum: 301
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.001073] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.001105] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.001795] CPU: Testing write buffer coherency: ok
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.002233] CPU0: update cpu_capacity 1024
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.002263] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.002292] [bcm2709_smp_prepare_cpus] enter
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.002402] Setting up static identity map for 0x8240 - 0x8298
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.003600] [bcm2709_boot_secondary] cpu:1 started (0) 17
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.003897] [bcm2709_secondary_init] enter cpu:1
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.003929] CPU1: update cpu_capacity 1024
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.003935] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.004238] [bcm2709_boot_secondary] cpu:2 started (0) 17
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.004442] [bcm2709_secondary_init] enter cpu:2
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.004461] CPU2: update cpu_capacity 1024
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.004467] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.004747] [bcm2709_boot_secondary] cpu:3 started (0) 15
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 0.004927] [bcm2709_secondary_init] enter cpu:3
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.004946] CPU3: update cpu_capacity 1024
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.004952] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.005003] Brought up 4 CPUs
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.005094] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.005120] CPU: All CPU(s) started in HYP mode.
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.005144] CPU: Virtualization extensions available.
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.013450] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.013758] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.014434] pinctrl core: initialized pinctrl subsystem
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.014917] NET: Registered protocol family 16
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.019979] DMA: preallocated 4096 KiB pool for atomic coherent allocations
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.049925] cpuidle: using governor ladder
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.079944] cpuidle: using governor menu
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.085818] bcm2709: Mini UART enabled
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.085929] Serial: AMBA PL011 UART driver
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.086070] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.086254] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.140842] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 0.142216] SCSI subsystem initialized
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.142401] usbcore: registered new interface driver usbfs
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.142497] usbcore: registered new interface driver hub
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.142580] usbcore: registered new device driver usb
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.150025] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-02 16:01
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.177025] clocksource: Switched to clocksource arch_sys_counter
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.184725] NET: Registered protocol family 2
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.185281] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.185415] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.185622] TCP: Hash tables configured (established 8192 bind 8192)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.185725] UDP hash table entries: 512 (order: 2, 16384 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.185789] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.185997] NET: Registered protocol family 1
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.187693] futex hash table entries: 1024 (order: 4, 65536 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.196226] io scheduler noop registered
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.196265] io scheduler deadline registered
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.196320] io scheduler cfq registered (default)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.198758] BCM2708FB: allocated DMA memory fa400000
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.198804] BCM2708FB: allocated DMA channel 0 @ f3007000
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.203587] Console: switching to colour frame buffer device 82x26
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.207775] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.209791] console [ttyS0] disabled
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.211066] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 31250000) is a 16550
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.808426] console [ttyS0] enabled
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.813831] vc-cma: Videocore CMA driver
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.819048] vc-cma: vc_cma_base = 0x00000000
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.825027] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.831682] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.838427] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.860122] brd: module loaded
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.871129] loop: module loaded
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.876148] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.885823] usbcore: registered new interface driver smsc95xx
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 0.892841] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.100051] Core Release: 2.80a
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.104380] Setting default values for core params
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.110430] Finished setting default values for core params
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.317577] Using Buffer DMA mode
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.322099] Periodic Transfer Interrupt Enhancement - disabled
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.329211] Multiprocessor Interrupt Enhancement - disabled
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.336039] OTG VER PARAM: 0, OTG VER FLAG: 0
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.341610] Dedicated Tx FIFOs mode
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.346511] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.358839] FIQ FSM acceleration enabled for :
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.358839] Non-periodic Split Transactions
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.358839] Periodic Split Transactions
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.358839] High-Speed Isochronous Endpoints
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.358839] Interrupt/Control Split Transaction hack enabled
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 1.387486] dwc_otg: Microframe scheduler enabled
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.387534] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80299718
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.394752] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.402331] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.409657] dwc_otg 3f980000.usb: DWC OTG Controller
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.415885] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.424528] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.431396] Init: Port Power? op_state=1
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.436525] Init: Power Port (0)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.441106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.449190] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.457701] usb usb1: Product: DWC OTG Controller
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.463623] usb usb1: Manufacturer: Linux 4.4.14 dwc_otg_hcd
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.470525] usb usb1: SerialNumber: 3f980000.usb
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.476939] hub 1-0:1.0: USB hub found
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.481887] hub 1-0:1.0: 1 port detected
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 1.487436] dwc_otg: FIQ enabled
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 1.487444] dwc_otg: NAK holdoff enabled
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 1.487451] dwc_otg: FIQ split-transaction FSM enabled
Tue Dec 13 23:40:34 2016 kern.debug kernel: [ 1.487486] Module dwc_common_port init
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.487653] usbcore: registered new interface driver uas
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.494211] usbcore: registered new interface driver usb-storage
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.501504] mousedev: PS/2 mouse device common for all mice
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.508955] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.517197] sdhci: Secure Digital Host Controller Interface driver
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.524598] sdhci: Copyright(c) Pierre Ossman
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.530392] sdhost: log_buf @ ba413000 (fa413000)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.607046] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.615952] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.623029] mmc-bcm2835 3f300000.mmc: DMA channel allocated
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.667106] sdhci-pltfm: SDHCI platform and OF driver helper
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.675618] NET: Registered protocol family 10
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.682039] NET: Registered protocol family 17
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.687175] Indeed it is in host mode hprt0 = 00021501
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.693978] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.709060] 8021q: 802.1Q VLAN Support v1.8
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 1.714879] Registering SWP/SWPB emulation handler
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.721524] vc-sm: Videocore shared memory driver
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.727466] [vc_sm_connected_init]: start
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.733098] [vc_sm_connected_init]: end - returning 0
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.739409] mmc0: host does not support reading read-only switch, assuming write-enable
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.740626] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.740982] of_cfs_init
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.741056] of_cfs_init: OK
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.769008] Waiting for root device /dev/mmcblk0p2...
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.775503] mmc0: new high speed SDHC card at address aaaa
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.782781] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.792445] mmcblk0: p1 p2
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.814038] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.822335] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.830641] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.840133] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.867041] usb 1-1: new high-speed USB device number 2 using dwc_otg
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 1.874763] Indeed it is in host mode hprt0 = 00001101
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.935735] mmc1: new high speed SDIO card at address 0001
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.946713] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.956620] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 1.965096] Freeing unused kernel memory: 220K (80547000 - 8057e000)
Tue Dec 13 23:40:34 2016 user.info kernel: [ 2.048925] init: Console is alive
Tue Dec 13 23:40:34 2016 user.info kernel: [ 2.053725] init: - watchdog -
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.087280] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.095246] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.104288] hub 1-1:1.0: USB hub found
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.109359] hub 1-1:1.0: 5 ports detected
Tue Dec 13 23:40:34 2016 user.info kernel: [ 2.189405] init: - preinit -
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.387047] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.507246] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.515472] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.526914] smsc95xx v1.0.4
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 2.527479] random: procd urandom read with 68 bits of entropy available
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 2.599913] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:cd:be:e0
Tue Dec 13 23:40:34 2016 user.notice kernel: [ 5.316638] mount_root: mounting /dev/root
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 5.322633] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 5.351926] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Tue Dec 13 23:40:34 2016 kern.warn kernel: [ 5.389157] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Tue Dec 13 23:40:34 2016 user.info kernel: [ 5.414468] procd: - early -
Tue Dec 13 23:40:34 2016 user.info kernel: [ 5.418850] procd: - watchdog -
Tue Dec 13 23:40:34 2016 user.info kernel: [ 6.043416] procd: - ubus -
Tue Dec 13 23:40:34 2016 user.info kernel: [ 6.101022] procd: - init -
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.859286] ip6_tables: (C) 2000-2006 Netfilter Core Team
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.874130] i2c /dev entries driver
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.880951] bcm2708_i2c 3f205000.i2c: BSC0 Controller at 0x3f205000 (irq 83) (baudrate 100000)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.892700] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.910873] hidraw: raw HID events driver (C) Jiri Kosina
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.933423] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.943821] Backport generated by backports.git backports-20160216-0-ge3c56e4
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.954239] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 6.965768] nf_conntrack version 0.5.0 (14876 buckets, 59504 max)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 7.100212] usbcore: registered new interface driver usbhid
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 7.107282] usbhid: USB HID core driver
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 7.118373] xt_time: kernel timezone is -0000
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 7.139812] PPP generic driver version 2.4.2
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 7.146244] NET: Registered protocol family 24
Tue Dec 13 23:40:34 2016 kern.notice kernel: [ 7.251052] random: nonblocking pool is initialized
Tue Dec 13 23:40:34 2016 kern.err kernel: [ 7.272341] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
Tue Dec 13 23:40:34 2016 kern.err kernel: [ 7.310394] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
Tue Dec 13 23:40:34 2016 kern.info kernel: [ 7.324862] usbcore: registered new interface driver brcmfmac
Tue Dec 13 23:40:35 2016 cron.info crond[602]: crond (busybox 1.24.2) started, log level 5
Tue Dec 13 23:40:35 2016 authpriv.info dropbear[624]: Not backgrounding
Tue Dec 13 23:40:35 2016 daemon.info kernel: [ 9.589689] udevd[673]: starting version 3.2
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.600901] udevd[673]: specified group 'tty' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.607965] udevd[673]: specified group 'dialout' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.614957] udevd[673]: specified group 'kmem' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.621670] udevd[673]: specified group 'input' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.628416] udevd[673]: specified group 'video' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.635273] udevd[673]: specified group 'lp' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.641683] udevd[673]: specified group 'disk' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.648153] udevd[673]: specified group 'cdrom' unknown
Tue Dec 13 23:40:35 2016 daemon.err kernel: [ 9.654717] udevd[673]: specified group 'tape' unknown
Tue Dec 13 23:40:35 2016 daemon.info kernel: [ 9.677408] udevd[674]: starting eudev-3.2
Tue Dec 13 23:40:36 2016 kern.info kernel: [ 9.828816] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Tue Dec 13 23:40:36 2016 kern.info kernel: [ 9.838898] device eth0 entered promiscuous mode
Tue Dec 13 23:40:36 2016 daemon.notice netifd: Interface 'lan' is enabled
Tue Dec 13 23:40:36 2016 kern.info kernel: [ 9.847703] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Tue Dec 13 23:40:36 2016 daemon.notice netifd: Interface 'loopback' is enabled
Tue Dec 13 23:40:36 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Dec 13 23:40:36 2016 daemon.notice netifd: Interface 'loopback' is now up
Tue Dec 13 23:40:36 2016 daemon.notice netifd: Network device 'lo' link is up
Tue Dec 13 23:40:36 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Dec 13 23:40:36 2016 daemon.notice netifd: radio0 (702): command failed: No error information (-524)
Tue Dec 13 23:40:36 2016 daemon.notice netifd: radio0 (702): command failed: Not supported (-95)
Tue Dec 13 23:40:36 2016 daemon.notice netifd: radio0 (702): command failed: I/O error (-5)
Tue Dec 13 23:40:36 2016 daemon.info dnsmasq[784]: started, version 2.76 cachesize 150
Tue Dec 13 23:40:36 2016 daemon.info dnsmasq[784]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Tue Dec 13 23:40:36 2016 daemon.info dnsmasq[784]: using local addresses only for domain lan
Tue Dec 13 23:40:36 2016 daemon.warn dnsmasq[784]: no servers found in /tmp/resolv.conf.auto, will retry
Tue Dec 13 23:40:36 2016 daemon.info dnsmasq[784]: read /etc/hosts - 4 addresses
Tue Dec 13 23:40:37 2016 daemon.info procd: - init complete -
Tue Dec 13 23:40:41 2016 kern.info kernel: [ 15.592851] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Tue Dec 13 23:40:41 2016 kern.info kernel: [ 15.604683] br-lan: port 1(eth0) entered forwarding state
Tue Dec 13 23:40:41 2016 kern.info kernel: [ 15.611337] br-lan: port 1(eth0) entered forwarding state
Tue Dec 13 23:40:41 2016 daemon.notice netifd: Network device 'eth0' link is up
Tue Dec 13 23:40:41 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Dec 13 23:40:41 2016 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Dec 13 23:40:41 2016 daemon.notice netifd: Interface 'lan' is setting up now
Tue Dec 13 23:40:41 2016 kern.info kernel: [ 15.618141] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Dec 13 23:40:41 2016 daemon.notice netifd: lan (802): udhcpc (v1.24.2) started
Tue Dec 13 23:40:41 2016 daemon.notice netifd: lan (802): Sending discover...
Tue Dec 13 23:40:42 2016 daemon.notice netifd: lan (802): Sending select for 192.168.1.10...
Tue Dec 13 23:40:42 2016 daemon.notice netifd: lan (802): Lease of 192.168.1.10 obtained, lease time 86400
Tue Dec 13 23:40:42 2016 daemon.notice netifd: Interface 'lan' is now up
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[784]: reading /tmp/resolv.conf.auto
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[784]: using local addresses only for domain lan
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[784]: using nameserver 192.168.1.1#53
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[784]: using nameserver 192.168.1.1#53
Tue Dec 13 23:40:42 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[784]: exiting on receipt of SIGTERM
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: started, version 2.76 cachesize 150
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: using local addresses only for domain lan
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: reading /tmp/resolv.conf.auto
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: using local addresses only for domain lan
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: using nameserver 192.168.1.1#53
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: using nameserver 192.168.1.1#53
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: read /etc/hosts - 4 addresses
Tue Dec 13 23:40:42 2016 daemon.info dnsmasq[865]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 13 23:40:43 2016 kern.info kernel: [ 17.607021] br-lan: port 1(eth0) entered forwarding state
Tue Dec 13 23:40:44 2016 daemon.info dnsmasq[865]: read /etc/hosts - 4 addresses
Tue Dec 13 23:40:44 2016 daemon.info dnsmasq[865]: read /tmp/hosts/odhcpd - 0 addresses
Tue Dec 13 23:40:44 2016 daemon.info dnsmasq[865]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 13 23:40:48 2016 daemon.warn dnsmasq[865]: nameserver 192.168.1.1 refused to do a recursive query
Tue Dec 13 23:40:50 2016 kern.info kernel: [ 24.307048] usb 1-1.5: new full-speed USB device number 4 using dwc_otg
Tue Dec 13 23:40:50 2016 kern.info kernel: [ 24.430489] usb 1-1.5: New USB device found, idVendor=29f1, idProduct=33f2
Tue Dec 13 23:40:50 2016 kern.info kernel: [ 24.438531] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Tue Dec 13 23:40:50 2016 kern.info kernel: [ 24.446995] usb 1-1.5: Product: USB2IIC Converter
Tue Dec 13 23:40:50 2016 kern.info kernel: [ 24.452847] usb 1-1.5: Manufacturer: CANAAN
Tue Dec 13 23:40:50 2016 kern.info kernel: [ 24.458173] usb 1-1.5: SerialNumber: 20141122
Tue Dec 13 23:42:00 2016 cron.info crond[602]: USER root pid 895 cmd /usr/bin/cgminer-monitor
Tue Dec 13 23:45:00 2016 cron.info crond[602]: USER root pid 1586 cmd /usr/bin/cgminer-monitor
Tue Dec 13 23:48:00 2016 cron.info crond[602]: USER root pid 1821 cmd /usr/bin/cgminer-monitor
Tue Dec 13 23:51:00 2016 cron.info crond[602]: USER root pid 1917 cmd /usr/bin/cgminer-monitor
Mon Jun 3 12:19:38 2019 cron.err crond[602]: time disparity of 1298187 minutes detected
Mon Jun 3 12:21:00 2019 cron.info crond[602]: USER root pid 3028 cmd /usr/bin/cgminer-monitor
Mon Jun 3 12:24:00 2019 cron.info crond[602]: USER root pid 4898 cmd /usr/bin/cgminer-monitor
Mon Jun 3 12:25:43 2019 daemon.err uhttpd[643]: Command failed: Not found
Mon Jun 3 12:25:54 2019 daemon.err uhttpd[643]: Command failed: Not found
Mon Jun 3 12:25:54 2019 daemon.err uhttpd[643]: Command failed: Not found
Mon Jun 3 12:27:00 2019 cron.info crond[602]: USER root pid 5482 cmd /usr/bin/cgminer-monitor
Mon Jun 3 12:29:00 2019 daemon.err uhttpd[643]: Command failed: Not found
Mon Jun 3 12:29:00 2019 daemon.err uhttpd[643]: Command failed: Not found
Mon Jun 3 12:30:00 2019 cron.info crond[602]: USER root pid 5889 cmd /usr/bin/cgminer-monitor
Mon Jun 3 12:33:00 2019 cron.info crond[602]: USER root pid 5971 cmd /usr/bin/cgminer-monitor
Please can someone help me with this I will really appreciate it! |
|
|
|
That gives us nothing to work with. Where the seller lives and country of origin means nothing....
WHO is the seller or what is the company name you are asking about?
GZ Woao Trad e Co., Ltd. BTC LTC DASH ETH MINER - from Aliexpress. do you mean pangolinminer.com ? I have purchased over 10000 USD in gear from them. they should be good for you. they have a telegram site if you go to the website you can look for telegram link and ask what used miners they have. https://pangolinminer.com/this should get you into telegram https://telegram.me/PangolinMinerOfficialI post on the channel at times. It's not Pangolinminer... It's a seller on Aliexpress. I know about pangolinminer.com it's good price but it's pre-order and can't wait till August/September to start mining. |
|
|
|
|
Seller origin was from Singapore, product was from HK. Its trusted ?
|
|
|
|
|
No, here don't have any restriction for mining. I have a problem, I ask them to buy 1 unit and after I will buy more... it's because I don't trust anyone who sells second hand miners. Also shipping is too high.
However I've found now M3X for 230usd (inc. p5 psu&shipping)..M3X have high power consumation but for start isn't good?
|
|
|
|
|
Thank you so much for all.
But 200$ it's impossible...
In my country I can't buy even a M3 / M3X with 200$... I talked with a seller in Alibaba to buy some miners and shipping was 190$ DHL/Fedex.
|
|
|
|
I wish you good luck with those new s9j's
What is wrong with new S9j's? |
|
|
|
Most of second hand miners are supplied by Chinese and As the BTC price rises they increase the price. Today I inquiry from China for 20 second hand, S9s , 13.5 TH (30 days warranty remains) including psu for 246 $ without shipping cost.
You can buy that it's too cheap but are those used units strong ? No. Everywhere Alibaba Aliexpress eBay etc. I've asked sellers about lifespan of an used S9s and their response was "if you run it 24/7 it will be dead after 6 months." So buying used S9s cannot calculate profits, they say 6 months but it may be dead after few weeks, who knows. I do not trust him, what I see he have sold many miners but no one have rated him here, that's why I do not trust also his personal website is a joke not from a professional. One big enough to handle the amount of power you are using. That in turn depends on your power line voltage, if using 208v then the 40kw you mentioned = 192.3amps feeding the circuit breaker panel. That gets split up depending on how much power each individual miners uses. For s9 and such (around 1,250w each) you can use a 15A outlet to power 2 miners.
You need to work with a licensed electrician to get the proper power outlets and circuit breakers wired per your area codes. If you do not do this for a living DO NOT just follow internet opinions about wiring. The risk of electrocution or fire is too great.
I've asked a electrican and he told me for that power it's needed a cable 35kV, cost is very high for 35kV in my country. He told me may cost 3-5kEur. |
|
|
|
|
What power cable is needed for 48 miners?
|
|
|
|
If you underclock them with Braiins OS you can even add more of them. By raising efficiency you can easily lower that consumption to under 820w each (@10T)... You could put 48 S9s, maybe some more if a few have damaged boards. 480THs vs 390THs using the same 40kW... Make sure you check more sellers, i have seen S9s at $150 each... PLUS, under-clocking tends to make them run cooler and last longer. Thank you for this idea it was really helpful. 150$ S9s? Please do you have any link or contact? All what I've found it's 385usd per unit. |
|
|
|
Have you tried to check this site https://www.asicminervalue.com/You can see all profitable ASIC machines if you are not paying on electricity bill then this is a good choice and Im sure you will make more profit than buying a 2nd s9. This is just a suggestion because there's no guarantee that the 2nd hand s9 will live long in mining. I use that site but problem is where I can buy... Official sites are out-of-stock, vendors there are completely scam. I have bought on cryptouniverse.at this Sunday and still Processing, I dunno if it's scam or out-of-business.. anyway I will see. |
|
|
|
|
