 Show Posts
|
|
Pages: [1] 2 »
|
How did you bypass the fan check? Are you using a fan simulator to bypass fan check? Or are you using a custom/modified firmware like Braiins OS/ASIC.to firmware?
The dashboard from your image is a bit different from the original firmware.
Do you have any physical image of this unit I just want to check how do you manage to work immersed with s19j pro or did you just directly put/submerge the entire miner into mineral oil?
Hi Max! I don't like fan simulators, I flashed a custom firmware (asic.to) It's great and has an immersion option, once you activate it all fans show 0 RPM and get spoofed. Here's mysetup: https://imgur.com/a/s7cisIU when the T17 was immersed. It's the same, except for a better pump. I removed all the fans and dunk the entire unit in a tank I had previously designed specifically for an S19-size rig. I don't use mineral oil (compatibility issues and high viscosity). A perfect liquid would be Bitcool, but is too expensive and shipping costs more than the liquid itself. instead, I'm using a premium transformer oil called Shell Diala, it is not great but does the job and is cheap. I'm using around 40L for this setup. Please feel free to ask any more questions! |
|
|
|
After 6 months of learning about immersion and trying out an S9 and T17. I have finally got an S19J PRO 100T immersed. Slightly overclocked to 105T, with chip temps 65-75C and board 50-60C. Tell me what you think! https://imgur.com/a/URkOAll |
|
|
|
How did you find the broken hashboard? Did you run them one by one? If you accidentally choose the right one without testing there is a possibility that the true culprit is the PSU.
Maybe PSU is not giving enough power to 3 hashboard so removing one hashboard can PSU provide enough power to 2 hashboard.
Why not try to run the broken hashboard without the two hashboard? To make sure that one is broken?
Hello, The log I shared was at the start of the issue. Later on, it stopped detecting the first board showing " failed to detect all chips". That's how I decided to remove it. But I'll remove a "healthy board" and replace the one I think is faulty. If it works, then your theory is right, maybe it was a PSU thing all along. |
|
|
|
Hello,
I rebooted, reset, but it keeps restarting. I'm using ASIC.to firmware. Autotuning is off. It's been working for 3 weeks straight.
How do you know Autotuning is off? just disabling it on the profile page, doesn't mean it will stop, anyway, go to Miner Configuration > Mining profiles and scroll down, there will be another log, please post that. I also don't think you need to worry about the health of the hash boards, they read just fine [2022/06/06 09:31:30] INFO: chain[2] - 30 chips detected
[2022/06/06 09:31:31] INFO: chain[1] - 30 chips detected
[2022/06/06 09:31:32] INFO: chain[0] - 30 chips detected Just to directly answer your question, Mike. This detection was a one-time thing. It kept failing to detect the first board ever since. Removing it fixed the issue. Sorry, I moved to Braiins now and don't have what you asked me to post. |
|
|
|
I noticed that both lights are off. I referred to bitmain page which suggested a faulty board. Is there a way to confirm that?
Since you are using modded firmware from asic.to the only thing that you need to confirm that the board is faulty is by using a test fixture. And why not try to run the miner again but this time enable the autotuning? I read the documentation about this asic.to firmware and according to it if it's not mining you can try to enable the "Resolve Dev Fee". And under "mining profiles", you can see how this miner will shutdown/restart automatically it has only two options either the miner has HW errors more than the value you set or if the hashrate is dropping. What I would like you to try is to flash it again with that firmware or try to switch to brains OS. Hello,
I rebooted, reset, but it keeps restarting. I'm using ASIC.to firmware. Autotuning is off. It's been working for 3 weeks straight.
How do you know Autotuning is off? just disabling it on the profile page, doesn't mean it will stop, anyway, go to Miner Configuration > Mining profiles and scroll down, there will be another log, please post that. I also don't think you need to worry about the health of the hash boards, they read just fine [2022/06/06 09:31:30] INFO: chain[2] - 30 chips detected
[2022/06/06 09:31:31] INFO: chain[1] - 30 chips detected
[2022/06/06 09:31:32] INFO: chain[0] - 30 chips detected Hello Mike and Max Thank you both for your valuable troubleshooting and the time you spent reading about this firmware. I have flashed it again and used Braiins OS but that did not solve the issue. The problem was, as Bitmax kindly noted, in one of the hashboard, it was causing this constant rebooting. I have removed it and it's been running smoothly ever since. I'm now overclocking the crap out of the other two, I don't care if this T17 breaks, it is a really bad model and a waste of a good $1000. |
|
|
|
I don't know how asic.to firmware works there might be different logs and the errors might be on the other logs like API logs..
If you want us to troubleshoot the issue with this unit I suggest you revert it back to the original/stock firmware so that you can get the errors under kernel logs.
I noticed that both lights are off. I referred to bitmain page which suggested a faulty board. Is there a way to confirm that? |
|
|
|
I don't know how asic.to firmware works there might be different logs and the errors might be on the other logs like API logs..
If you want us to troubleshoot the issue with this unit I suggest you revert it back to the original/stock firmware so that you can get the errors under kernel logs.
I’d love to but this unit is immersed. Stock fw would be filled with Fan errors |
|
|
|
Hello, I rebooted, reset, but it keeps restarting. I'm using ASIC.to firmware. Autotuning is off. It's been working for 3 weeks straight. [2022/06/06 09:25:59] INFO: Power ON
[2022/06/06 09:26:01] INFO: Starting FPGA queue
[2022/06/06 09:26:01] INFO: Initializing hash boards
[2022/06/06 09:26:01] INFO: chain[2] - Initializing
[2022/06/06 09:26:01] INFO: chain[1] - Initializing
[2022/06/06 09:26:01] INFO: chain[0] - Initializing
[2022/06/06 09:26:14] INFO: chain[2] - 30 chips detected
[2022/06/06 09:26:15] INFO: chain[1] - 30 chips detected
[2022/06/06 09:26:16] INFO: chain[0] - 30 chips detected
[2022/06/06 09:26:22] INFO: Start-up temperature is 36 C (min -15 C)
[2022/06/06 09:26:22] INFO: Switching to manual fan control (100 %)
[2022/06/06 09:26:22] INFO: Changing voltage from 17000 to 18500 mV gradually
[2022/06/06 09:27:00] INFO: Raising freq from 50 to 500 Mhz gradually
[2022/06/06 09:27:10] INFO: Switching to immersion fan control
[2022/06/06 09:27:10] INFO: Start mining!
[2022/06/06 09:27:27] INFO: Detected 256 Mb of RAM
[2022/06/06 09:27:27] INFO: Switching to immersion fan control
[2022/06/06 09:27:33] INFO: Power ON
[2022/06/06 09:27:35] INFO: Starting FPGA queue
[2022/06/06 09:27:35] INFO: Initializing hash boards
[2022/06/06 09:27:35] INFO: chain[2] - Initializing
[2022/06/06 09:27:35] INFO: chain[1] - Initializing
[2022/06/06 09:27:35] INFO: chain[0] - Initializing
[2022/06/06 09:27:49] INFO: chain[2] - 30 chips detected
[2022/06/06 09:27:51] INFO: chain[1] - 30 chips detected
[2022/06/06 09:27:52] INFO: chain[0] - 30 chips detected
[2022/06/06 09:27:58] INFO: Start-up temperature is 36 C (min -15 C)
[2022/06/06 09:27:58] INFO: Switching to manual fan control (100 %)
[2022/06/06 09:27:58] INFO: Changing voltage from 17000 to 18500 mV gradually
[2022/06/06 09:28:36] INFO: Raising freq from 50 to 500 Mhz gradually
[2022/06/06 09:28:46] INFO: Switching to immersion fan control
[2022/06/06 09:28:46] INFO: Start mining!
[2022/06/06 09:29:17] INFO: Detected 256 Mb of RAM
[2022/06/06 09:29:17] INFO: Switching to immersion fan control
[2022/06/06 09:29:23] INFO: Power ON
[2022/06/06 09:29:25] INFO: Starting FPGA queue
[2022/06/06 09:29:25] INFO: Initializing hash boards
[2022/06/06 09:29:25] INFO: chain[2] - Initializing
[2022/06/06 09:29:25] INFO: chain[1] - Initializing
[2022/06/06 09:29:25] INFO: chain[0] - Initializing
[2022/06/06 09:29:39] INFO: chain[2] - 30 chips detected
[2022/06/06 09:29:41] INFO: chain[1] - 30 chips detected
[2022/06/06 09:29:42] INFO: chain[0] - 30 chips detected
[2022/06/06 09:29:49] INFO: Start-up temperature is 37 C (min -15 C)
[2022/06/06 09:29:49] INFO: Switching to manual fan control (100 %)
[2022/06/06 09:29:49] INFO: Changing voltage from 17000 to 18500 mV gradually
[2022/06/06 09:30:26] INFO: Raising freq from 50 to 500 Mhz gradually
[2022/06/06 09:30:36] INFO: Switching to immersion fan control
[2022/06/06 09:30:36] INFO: Start mining!
[2022/06/06 09:31:07] INFO: Detected 256 Mb of RAM
[2022/06/06 09:31:07] INFO: Switching to immersion fan control
[2022/06/06 09:31:13] INFO: Power ON
[2022/06/06 09:31:16] INFO: Starting FPGA queue
[2022/06/06 09:31:16] INFO: Initializing hash boards
[2022/06/06 09:31:16] INFO: chain[2] - Initializing
[2022/06/06 09:31:16] INFO: chain[1] - Initializing
[2022/06/06 09:31:16] INFO: chain[0] - Initializing
[2022/06/06 09:31:30] INFO: chain[2] - 30 chips detected
[2022/06/06 09:31:31] INFO: chain[1] - 30 chips detected
[2022/06/06 09:31:32] INFO: chain[0] - 30 chips detected
[2022/06/06 09:31:38] INFO: Start-up temperature is 37 C (min -15 C)
[2022/06/06 09:31:38] INFO: Switching to manual fan control (100 %)
[2022/06/06 09:31:38] INFO: Changing voltage from 17000 to 18500 mV gradually |
|
|
|
|
Hi,
How do you compare a T17 chip temp 80C to an inlet temp of S19? Is it even comparable? I'm asking this to get an idea on what my S19 temps be like when I get one. I currently run a T17 immersed with chip temp 80C and board 50C, fluid temp is 40C.
|
|
|
|
I was talking about the t17 model, but the whole 17 series is trash, the s19 is of a better quality that is for sure, but you should also consider whatsminer m30s, they are solid gears but unfortunately no custom firmware for them, you will have to use the immersion stock firmware they have which might be limited to some degree.
Will definitely keep that in mind!! Thanks. |
|
|
|
I have two red chips on chain 0. The moment I play around with them to get them to at least an orange, I keep getting the same error as the tuning. I decided to let them be. Are you happy with these numbers? Thanks again.
Gave you merits for reporting back, most folks don't bother after getting their issues fixed.  38TH and even 42TH is easily doable with air cooling alone even in relatively warm places, or at least that was my own "short-lived" experience with these piece of junk hardware, I am sure you can push a lot higher given your immersion cooling, but that will also increase the likely hood of gear damage, so I'd say just focus on temps, I personally think 80c is good 85c is where it start thinking about reducing my hashrate or otherwise increase the cooling if possible. You can also attempt to lower the voltage, lowering the voltage while keeping the same frequency might result in lower temps with the same hashrate, the only issue with this model is that you can't have different voltages on different boards, so chain 1 might do ok with a lower voltage, but then chain 2 or 0 will start acting weird, it will take a lot of trial and error to get your gear's optimal settings. But if you are a lazy old man like me, then be happy with the readings and get some rest. Hi Mike! I don't know if you're referring to T17 or the entire Bitmain line as junk, but I do agree that my T17 is anything but quality. I'm just going to experience the most with it before I get an S19. Thanks again! |
|
|
|
[2022/05/17 21:20:01] INFO: chain[0] ->
[2022/05/17 21:20:01] INFO: domain[9] - set freq to 595 Mhz
[2022/05/17 21:20:01] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 21:20:01] INFO: chain[1] ->
[2022/05/17 21:20:01] INFO: ok
[2022/05/17 21:20:01] INFO: chain[2] ->
[2022/05/17 21:20:01] INFO: ok
[2022/05/17 21:21:51] INFO: =[ Tuner ]==============================
[2022/05/17 21:21:51] INFO: Starting auto-tuning
[2022/05/17 21:21:51] INFO: Preset: Profile 36Th @ 600MHz
Ok, so what the tuner is telling you is that chain 1 and 2 were tuned successfully but then chain 0 had an issue with at least 1 chip, and thus it's trying to reduce the frequency of that hash board to get to a stable point, that also perfectly matches what wndsnb mentioned about one of your hash board showing a temp sensor error in the kernel log you posted earlier. Eventually, the tuner might get it to a stable stage, but that could take very long and thus you are better off manually setting the frequency, use 600MHz on the two good boards and start with the lowest frequency on the bad board, and then slowly increase it until it becomes stable, keep in mind that sometimes even with the lowest frequency the hash board won't hash well which means you will need to unplug so that it does not affect the other two hash boards. On a side but related note, the two working boards seem to do very well with a frequency of 600MHz, which means you could probably increase it, that gives you more hashrate and of course more heat, so you need to find that perfect spot. Hi Mike. Thanks for the time spent debugging my log. Yes, I did exactly that and sat the freq to 690 and volt to 16.3. It has been running smoothly for a day hashing away at 38T and drawing 2kw. More details here: https://imgur.com/a/gynUI5j. I have two red chips on chain 0. The moment I play around with them to get them to at least an orange, I keep getting the same error as the tuning. I decided to let them be. Are you happy with these numbers? Thanks again. |
|
|
|
If a hashboard errors-out for any reason during the tuning cycle, I think the Vnish firmware restarts the tuning process from the beginning. So if you have a board that occasionally has issues, it can end up tuning forever. Your log shows some temperature sensor errors on chain 0, so my guess is that board is your problem. You might be better off trying to manually tune it from the "chip frequencies" tab. And the log mikeywith asked for is different than the one you posted. The tuning log is not the "miner log", it is in the spot he indicated in his reply: I can't tell for sure without seeing the tuning log, you can find them in Miner configuration > mining profiles > at the bottom of the page, copy and paste them here, please use the code tag when doing so, without it will be messy and hard to read.
hello. Yes, I've seen that too. Sorry here's the log asked: [2022/05/17 20:05:44] INFO: =[ Tuner ]==============================
[2022/05/17 20:05:44] INFO: Starting auto-tuning
[2022/05/17 20:05:44] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 20:05:44] INFO: Detecting mininum voltage
[2022/05/17 20:10:25] INFO: voltage = 15300 mV
[2022/05/17 20:10:25] INFO: chain[0] - 11648 GH/s (96.29 %)
[2022/05/17 20:10:25] INFO: chain[1] - 11722 GH/s (96.91 %)
[2022/05/17 20:10:25] INFO: chain[2] - 11481 GH/s (94.92 %)
[2022/05/17 20:11:38] INFO: voltage = 15200 mV
[2022/05/17 20:11:38] INFO: chain[0] - 11645 GH/s (96.27 %)
[2022/05/17 20:11:38] INFO: chain[1] - 11773 GH/s (97.33 %)
[2022/05/17 20:11:38] INFO: chain[2] - 11482 GH/s (94.92 %)
[2022/05/17 20:12:54] INFO: voltage = 15100 mV
[2022/05/17 20:12:54] INFO: chain[0] - 11585 GH/s (95.77 %)
[2022/05/17 20:12:54] INFO: chain[1] - 11777 GH/s (97.36 %)
[2022/05/17 20:12:54] INFO: chain[2] - 11436 GH/s (94.55 %)
[2022/05/17 20:14:08] INFO: voltage = 15000 mV
[2022/05/17 20:14:08] INFO: chain[0] - 11632 GH/s (96.17 %)
[2022/05/17 20:14:08] INFO: chain[1] - 11717 GH/s (96.87 %)
[2022/05/17 20:14:08] INFO: chain[2] - 11484 GH/s (94.94 %)
[2022/05/17 20:15:23] INFO: voltage = 14900 mV
[2022/05/17 20:15:23] INFO: chain[0] - 11618 GH/s (96.05 %)
[2022/05/17 20:15:23] INFO: chain[1] - 11827 GH/s (97.78 %)
[2022/05/17 20:15:23] INFO: chain[2] - 11513 GH/s (95.18 %)
[2022/05/17 20:16:37] INFO: voltage = 14800 mV
[2022/05/17 20:16:37] INFO: chain[0] - 11612 GH/s (96.00 %)
[2022/05/17 20:16:37] INFO: chain[1] - 11855 GH/s (98.01 %)
[2022/05/17 20:16:37] INFO: chain[2] - 11586 GH/s (95.79 %)
[2022/05/17 20:17:53] INFO: voltage = 14700 mV
[2022/05/17 20:17:53] INFO: chain[0] - 11542 GH/s (95.42 %)
[2022/05/17 20:17:53] INFO: chain[1] - 11842 GH/s (97.90 %)
[2022/05/17 20:17:53] INFO: chain[2] - 11621 GH/s (96.08 %)
[2022/05/17 20:19:07] INFO: voltage = 14600 mV
[2022/05/17 20:19:07] INFO: chain[0] - 11580 GH/s (95.73 %)
[2022/05/17 20:19:07] INFO: chain[1] - 11882 GH/s (98.23 %)
[2022/05/17 20:19:07] INFO: chain[2] - 11682 GH/s (96.57 %)
[2022/05/17 20:20:22] INFO: voltage = 14500 mV
[2022/05/17 20:20:22] INFO: chain[0] - 11485 GH/s (94.95 %)
[2022/05/17 20:20:22] INFO: chain[1] - 11922 GH/s (98.56 %)
[2022/05/17 20:20:22] INFO: chain[2] - 11663 GH/s (96.42 %)
[2022/05/17 20:20:22] INFO: Minimum voltage is 14600 mV
[2022/05/17 20:20:31] INFO: Fixing unstable domains
[2022/05/17 20:22:14] INFO: =[ Tuner ]==============================
[2022/05/17 20:22:14] INFO: Starting auto-tuning
[2022/05/17 20:22:14] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 20:22:14] INFO: Detecting mininum voltage
[2022/05/17 20:24:04] INFO: =[ Tuner ]==============================
[2022/05/17 20:24:04] INFO: Starting auto-tuning
[2022/05/17 20:24:04] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 20:24:04] INFO: Detecting mininum voltage
[2022/05/17 20:28:45] INFO: voltage = 15300 mV
[2022/05/17 20:28:45] INFO: chain[0] - 11436 GH/s (94.54 %)
[2022/05/17 20:28:45] INFO: chain[1] - 11647 GH/s (96.29 %)
[2022/05/17 20:28:45] INFO: chain[2] - 11388 GH/s (94.14 %)
[2022/05/17 20:29:59] INFO: voltage = 15200 mV
[2022/05/17 20:29:59] INFO: chain[0] - 11471 GH/s (94.83 %)
[2022/05/17 20:29:59] INFO: chain[1] - 11705 GH/s (96.77 %)
[2022/05/17 20:29:59] INFO: chain[2] - 11401 GH/s (94.26 %)
[2022/05/17 20:31:14] INFO: voltage = 15100 mV
[2022/05/17 20:31:14] INFO: chain[0] - 11480 GH/s (94.91 %)
[2022/05/17 20:31:14] INFO: chain[1] - 11732 GH/s (96.99 %)
[2022/05/17 20:31:14] INFO: chain[2] - 11391 GH/s (94.17 %)
[2022/05/17 20:32:28] INFO: voltage = 15000 mV
[2022/05/17 20:32:28] INFO: chain[0] - 11491 GH/s (95.00 %)
[2022/05/17 20:32:28] INFO: chain[1] - 11809 GH/s (97.63 %)
[2022/05/17 20:32:28] INFO: chain[2] - 11445 GH/s (94.62 %)
[2022/05/17 20:33:44] INFO: voltage = 14900 mV
[2022/05/17 20:33:44] INFO: chain[0] - 11515 GH/s (95.19 %)
[2022/05/17 20:33:44] INFO: chain[1] - 11767 GH/s (97.28 %)
[2022/05/17 20:33:44] INFO: chain[2] - 11498 GH/s (95.05 %)
[2022/05/17 20:34:58] INFO: voltage = 14800 mV
[2022/05/17 20:34:58] INFO: chain[0] - 11512 GH/s (95.17 %)
[2022/05/17 20:34:58] INFO: chain[1] - 11776 GH/s (97.36 %)
[2022/05/17 20:34:58] INFO: chain[2] - 11563 GH/s (95.59 %)
[2022/05/17 20:36:13] INFO: voltage = 14700 mV
[2022/05/17 20:36:13] INFO: chain[0] - 11472 GH/s (94.84 %)
[2022/05/17 20:36:13] INFO: chain[1] - 11820 GH/s (97.72 %)
[2022/05/17 20:36:13] INFO: chain[2] - 11523 GH/s (95.27 %)
[2022/05/17 20:37:27] INFO: voltage = 14600 mV
[2022/05/17 20:37:27] INFO: chain[0] - 11473 GH/s (94.85 %)
[2022/05/17 20:37:27] INFO: chain[1] - 11861 GH/s (98.06 %)
[2022/05/17 20:37:27] INFO: chain[2] - 11662 GH/s (96.41 %)
[2022/05/17 20:38:43] INFO: voltage = 14500 mV
[2022/05/17 20:38:43] INFO: chain[0] - 11361 GH/s (93.93 %)
[2022/05/17 20:38:43] INFO: chain[1] - 11851 GH/s (97.97 %)
[2022/05/17 20:38:43] INFO: chain[2] - 11608 GH/s (95.97 %)
[2022/05/17 20:38:43] INFO: Minimum voltage is 14600 mV
[2022/05/17 20:38:53] INFO: Fixing unstable domains
[2022/05/17 20:40:36] INFO: =[ Tuner ]==============================
[2022/05/17 20:40:36] INFO: Starting auto-tuning
[2022/05/17 20:40:36] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 20:40:36] INFO: Detecting mininum voltage
[2022/05/17 20:42:26] INFO: =[ Tuner ]==============================
[2022/05/17 20:42:26] INFO: Starting auto-tuning
[2022/05/17 20:42:26] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 20:42:26] INFO: Detecting mininum voltage
[2022/05/17 20:47:09] INFO: voltage = 15300 mV
[2022/05/17 20:47:09] INFO: chain[0] - 11430 GH/s (94.49 %)
[2022/05/17 20:47:09] INFO: chain[1] - 11670 GH/s (96.47 %)
[2022/05/17 20:47:09] INFO: chain[2] - 11355 GH/s (93.87 %)
[2022/05/17 20:48:23] INFO: voltage = 15200 mV
[2022/05/17 20:48:23] INFO: chain[0] - 11478 GH/s (94.89 %)
[2022/05/17 20:48:23] INFO: chain[1] - 11709 GH/s (96.80 %)
[2022/05/17 20:48:23] INFO: chain[2] - 11365 GH/s (93.96 %)
[2022/05/17 20:49:38] INFO: voltage = 15100 mV
[2022/05/17 20:49:38] INFO: chain[0] - 11469 GH/s (94.81 %)
[2022/05/17 20:49:38] INFO: chain[1] - 11753 GH/s (97.16 %)
[2022/05/17 20:49:38] INFO: chain[2] - 11420 GH/s (94.41 %)
[2022/05/17 20:50:52] INFO: voltage = 15000 mV
[2022/05/17 20:50:52] INFO: chain[0] - 11544 GH/s (95.44 %)
[2022/05/17 20:50:52] INFO: chain[1] - 11717 GH/s (96.86 %)
[2022/05/17 20:50:52] INFO: chain[2] - 11468 GH/s (94.81 %)
[2022/05/17 20:52:08] INFO: voltage = 14900 mV
[2022/05/17 20:52:08] INFO: chain[0] - 11478 GH/s (94.89 %)
[2022/05/17 20:52:08] INFO: chain[1] - 11752 GH/s (97.16 %)
[2022/05/17 20:52:08] INFO: chain[2] - 11454 GH/s (94.69 %)
[2022/05/17 20:53:22] INFO: voltage = 14800 mV
[2022/05/17 20:53:22] INFO: chain[0] - 11525 GH/s (95.28 %)
[2022/05/17 20:53:22] INFO: chain[1] - 11731 GH/s (96.98 %)
[2022/05/17 20:53:22] INFO: chain[2] - 11494 GH/s (95.03 %)
[2022/05/17 20:54:37] INFO: voltage = 14700 mV
[2022/05/17 20:54:37] INFO: chain[0] - 11528 GH/s (95.31 %)
[2022/05/17 20:54:37] INFO: chain[1] - 11814 GH/s (97.67 %)
[2022/05/17 20:54:37] INFO: chain[2] - 11597 GH/s (95.87 %)
[2022/05/17 20:55:51] INFO: voltage = 14600 mV
[2022/05/17 20:55:51] INFO: chain[0] - 11492 GH/s (95.01 %)
[2022/05/17 20:55:51] INFO: chain[1] - 11830 GH/s (97.80 %)
[2022/05/17 20:55:51] INFO: chain[2] - 11598 GH/s (95.89 %)
[2022/05/17 20:57:07] INFO: voltage = 14500 mV
[2022/05/17 20:57:07] INFO: chain[0] - 11434 GH/s (94.53 %)
[2022/05/17 20:57:07] INFO: chain[1] - 11927 GH/s (98.60 %)
[2022/05/17 20:57:07] INFO: chain[2] - 11639 GH/s (96.22 %)
[2022/05/17 20:57:07] INFO: Minimum voltage is 14600 mV
[2022/05/17 20:57:15] INFO: Fixing unstable domains
[2022/05/17 20:58:58] INFO: =[ Tuner ]==============================
[2022/05/17 20:58:58] INFO: Starting auto-tuning
[2022/05/17 20:58:58] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 20:58:58] INFO: Detecting mininum voltage
[2022/05/17 21:03:38] INFO: voltage = 15300 mV
[2022/05/17 21:03:38] INFO: chain[0] - 11500 GH/s (95.08 %)
[2022/05/17 21:03:38] INFO: chain[1] - 11683 GH/s (96.58 %)
[2022/05/17 21:03:38] INFO: chain[2] - 11338 GH/s (93.74 %)
[2022/05/17 21:04:52] INFO: voltage = 15200 mV
[2022/05/17 21:04:52] INFO: chain[0] - 11521 GH/s (95.25 %)
[2022/05/17 21:04:52] INFO: chain[1] - 11706 GH/s (96.78 %)
[2022/05/17 21:04:52] INFO: chain[2] - 11350 GH/s (93.83 %)
[2022/05/17 21:06:07] INFO: voltage = 15100 mV
[2022/05/17 21:06:07] INFO: chain[0] - 11505 GH/s (95.12 %)
[2022/05/17 21:06:07] INFO: chain[1] - 11763 GH/s (97.25 %)
[2022/05/17 21:06:07] INFO: chain[2] - 11448 GH/s (94.64 %)
[2022/05/17 21:07:21] INFO: voltage = 15000 mV
[2022/05/17 21:07:21] INFO: chain[0] - 11535 GH/s (95.36 %)
[2022/05/17 21:07:21] INFO: chain[1] - 11716 GH/s (96.86 %)
[2022/05/17 21:07:21] INFO: chain[2] - 11398 GH/s (94.23 %)
[2022/05/17 21:08:37] INFO: voltage = 14900 mV
[2022/05/17 21:08:37] INFO: chain[0] - 11532 GH/s (95.34 %)
[2022/05/17 21:08:37] INFO: chain[1] - 11715 GH/s (96.85 %)
[2022/05/17 21:08:37] INFO: chain[2] - 11451 GH/s (94.66 %)
[2022/05/17 21:09:51] INFO: voltage = 14800 mV
[2022/05/17 21:09:51] INFO: chain[0] - 11608 GH/s (95.97 %)
[2022/05/17 21:09:51] INFO: chain[1] - 11799 GH/s (97.55 %)
[2022/05/17 21:09:51] INFO: chain[2] - 11474 GH/s (94.86 %)
[2022/05/17 21:11:06] INFO: voltage = 14700 mV
[2022/05/17 21:11:06] INFO: chain[0] - 11520 GH/s (95.24 %)
[2022/05/17 21:11:06] INFO: chain[1] - 11803 GH/s (97.58 %)
[2022/05/17 21:11:06] INFO: chain[2] - 11566 GH/s (95.61 %)
[2022/05/17 21:12:20] INFO: voltage = 14600 mV
[2022/05/17 21:12:20] INFO: chain[0] - 11520 GH/s (95.24 %)
[2022/05/17 21:12:20] INFO: chain[1] - 11829 GH/s (97.79 %)
[2022/05/17 21:12:20] INFO: chain[2] - 11593 GH/s (95.84 %)
[2022/05/17 21:13:36] INFO: voltage = 14500 mV
[2022/05/17 21:13:36] INFO: chain[0] - 11462 GH/s (94.76 %)
[2022/05/17 21:13:36] INFO: chain[1] - 11831 GH/s (97.81 %)
[2022/05/17 21:13:36] INFO: chain[2] - 11638 GH/s (96.22 %)
[2022/05/17 21:13:36] INFO: Minimum voltage is 14600 mV
[2022/05/17 21:13:46] INFO: Fixing unstable domains
[2022/05/17 21:18:54] INFO: -[ Round 1 ]---------------------------
[2022/05/17 21:18:54] INFO: Collecting metrics
[2022/05/17 21:20:01] INFO: voltage = 14600 mV
[2022/05/17 21:20:01] INFO: chain[0] - 11467 GH/s (94.80 %)
[2022/05/17 21:20:01] INFO: chain[1] - 11857 GH/s (98.03 %)
[2022/05/17 21:20:01] INFO: chain[2] - 11639 GH/s (96.22 %)
[2022/05/17 21:20:01] INFO: chain[0] ->
[2022/05/17 21:20:01] INFO: domain[9] - set freq to 595 Mhz
[2022/05/17 21:20:01] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 21:20:01] INFO: chain[1] ->
[2022/05/17 21:20:01] INFO: ok
[2022/05/17 21:20:01] INFO: chain[2] ->
[2022/05/17 21:20:01] INFO: ok
[2022/05/17 21:21:51] INFO: =[ Tuner ]==============================
[2022/05/17 21:21:51] INFO: Starting auto-tuning
[2022/05/17 21:21:51] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 21:21:51] INFO: Detecting mininum voltage
[2022/05/17 21:23:41] INFO: =[ Tuner ]==============================
[2022/05/17 21:23:41] INFO: Starting auto-tuning
[2022/05/17 21:23:41] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 21:23:41] INFO: Detecting mininum voltage
[2022/05/17 21:28:23] INFO: voltage = 15300 mV
[2022/05/17 21:28:23] INFO: chain[0] - 11563 GH/s (95.60 %)
[2022/05/17 21:28:23] INFO: chain[1] - 11688 GH/s (96.63 %)
[2022/05/17 21:28:23] INFO: chain[2] - 11328 GH/s (93.65 %)
[2022/05/17 21:29:37] INFO: voltage = 15200 mV
[2022/05/17 21:29:37] INFO: chain[0] - 11562 GH/s (95.59 %)
[2022/05/17 21:29:37] INFO: chain[1] - 11723 GH/s (96.92 %)
[2022/05/17 21:29:37] INFO: chain[2] - 11369 GH/s (93.99 %)
[2022/05/17 21:30:52] INFO: voltage = 15100 mV
[2022/05/17 21:30:52] INFO: chain[0] - 11590 GH/s (95.81 %)
[2022/05/17 21:30:52] INFO: chain[1] - 11719 GH/s (96.88 %)
[2022/05/17 21:30:52] INFO: chain[2] - 11365 GH/s (93.96 %)
[2022/05/17 21:32:06] INFO: voltage = 15000 mV
[2022/05/17 21:32:06] INFO: chain[0] - 11552 GH/s (95.50 %)
[2022/05/17 21:32:06] INFO: chain[1] - 11735 GH/s (97.02 %)
[2022/05/17 21:32:06] INFO: chain[2] - 11473 GH/s (94.85 %)
[2022/05/17 21:33:22] INFO: voltage = 14900 mV
[2022/05/17 21:33:22] INFO: chain[0] - 11577 GH/s (95.71 %)
[2022/05/17 21:33:22] INFO: chain[1] - 11760 GH/s (97.22 %)
[2022/05/17 21:33:22] INFO: chain[2] - 11471 GH/s (94.83 %)
[2022/05/17 21:34:36] INFO: voltage = 14800 mV
[2022/05/17 21:34:36] INFO: chain[0] - 11614 GH/s (96.01 %)
[2022/05/17 21:34:36] INFO: chain[1] - 11773 GH/s (97.33 %)
[2022/05/17 21:34:36] INFO: chain[2] - 11549 GH/s (95.48 %)
[2022/05/17 21:35:51] INFO: voltage = 14700 mV
[2022/05/17 21:35:51] INFO: chain[0] - 11555 GH/s (95.52 %)
[2022/05/17 21:35:51] INFO: chain[1] - 11798 GH/s (97.54 %)
[2022/05/17 21:35:51] INFO: chain[2] - 11615 GH/s (96.03 %)
[2022/05/17 21:37:05] INFO: voltage = 14600 mV
[2022/05/17 21:37:05] INFO: chain[0] - 11523 GH/s (95.26 %)
[2022/05/17 21:37:05] INFO: chain[1] - 11822 GH/s (97.74 %)
[2022/05/17 21:37:05] INFO: chain[2] - 11614 GH/s (96.01 %)
[2022/05/17 21:38:21] INFO: voltage = 14500 mV
[2022/05/17 21:38:21] INFO: chain[0] - 11534 GH/s (95.35 %)
[2022/05/17 21:38:21] INFO: chain[1] - 11874 GH/s (98.16 %)
[2022/05/17 21:38:21] INFO: chain[2] - 11629 GH/s (96.14 %)
[2022/05/17 21:38:21] INFO: Minimum voltage is 14600 mV
[2022/05/17 21:38:29] INFO: Fixing unstable domains
[2022/05/17 21:40:13] INFO: =[ Tuner ]==============================
[2022/05/17 21:40:13] INFO: Starting auto-tuning
[2022/05/17 21:40:13] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 21:40:13] INFO: Detecting mininum voltage
[2022/05/17 21:42:03] INFO: =[ Tuner ]==============================
[2022/05/17 21:42:03] INFO: Starting auto-tuning
[2022/05/17 21:42:03] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 21:42:03] INFO: Detecting mininum voltage
[2022/05/17 21:46:46] INFO: voltage = 15300 mV
[2022/05/17 21:46:46] INFO: chain[0] - 11527 GH/s (95.30 %)
[2022/05/17 21:46:46] INFO: chain[1] - 11689 GH/s (96.64 %)
[2022/05/17 21:46:46] INFO: chain[2] - 11328 GH/s (93.65 %)
[2022/05/17 21:48:00] INFO: voltage = 15200 mV
[2022/05/17 21:48:00] INFO: chain[0] - 11581 GH/s (95.74 %)
[2022/05/17 21:48:00] INFO: chain[1] - 11739 GH/s (97.04 %)
[2022/05/17 21:48:00] INFO: chain[2] - 11377 GH/s (94.06 %)
[2022/05/17 21:49:15] INFO: voltage = 15100 mV
[2022/05/17 21:49:15] INFO: chain[0] - 11591 GH/s (95.82 %)
[2022/05/17 21:49:15] INFO: chain[1] - 11748 GH/s (97.12 %)
[2022/05/17 21:49:15] INFO: chain[2] - 11403 GH/s (94.27 %)
[2022/05/17 21:50:29] INFO: voltage = 15000 mV
[2022/05/17 21:50:29] INFO: chain[0] - 11534 GH/s (95.35 %)
[2022/05/17 21:50:29] INFO: chain[1] - 11689 GH/s (96.64 %)
[2022/05/17 21:50:29] INFO: chain[2] - 11442 GH/s (94.59 %)
[2022/05/17 21:51:45] INFO: voltage = 14900 mV
[2022/05/17 21:51:45] INFO: chain[0] - 11594 GH/s (95.85 %)
[2022/05/17 21:51:45] INFO: chain[1] - 11750 GH/s (97.14 %)
[2022/05/17 21:51:45] INFO: chain[2] - 11457 GH/s (94.72 %)
[2022/05/17 21:52:59] INFO: voltage = 14800 mV
[2022/05/17 21:52:59] INFO: chain[0] - 11543 GH/s (95.43 %)
[2022/05/17 21:52:59] INFO: chain[1] - 11774 GH/s (97.34 %)
[2022/05/17 21:52:59] INFO: chain[2] - 11494 GH/s (95.02 %)
[2022/05/17 21:54:14] INFO: voltage = 14700 mV
[2022/05/17 21:54:14] INFO: chain[0] - 11612 GH/s (96.00 %)
[2022/05/17 21:54:14] INFO: chain[1] - 11829 GH/s (97.80 %)
[2022/05/17 21:54:14] INFO: chain[2] - 11589 GH/s (95.81 %)
[2022/05/17 21:55:28] INFO: voltage = 14600 mV
[2022/05/17 21:55:28] INFO: chain[0] - 11551 GH/s (95.49 %)
[2022/05/17 21:55:28] INFO: chain[1] - 11757 GH/s (97.20 %)
[2022/05/17 21:55:28] INFO: chain[2] - 11558 GH/s (95.56 %)
[2022/05/17 21:56:44] INFO: voltage = 14500 mV
[2022/05/17 21:56:44] INFO: chain[0] - 11473 GH/s (94.85 %)
[2022/05/17 21:56:44] INFO: chain[1] - 11815 GH/s (97.68 %)
[2022/05/17 21:56:44] INFO: chain[2] - 11654 GH/s (96.35 %)
[2022/05/17 21:56:44] INFO: Minimum voltage is 14600 mV
[2022/05/17 21:56:52] INFO: Fixing unstable domains
[2022/05/17 22:02:00] INFO: -[ Round 1 ]---------------------------
[2022/05/17 22:02:00] INFO: Collecting metrics
[2022/05/17 22:03:07] INFO: voltage = 14600 mV
[2022/05/17 22:03:07] INFO: chain[0] - 11547 GH/s (95.47 %)
[2022/05/17 22:03:07] INFO: chain[1] - 11843 GH/s (97.91 %)
[2022/05/17 22:03:07] INFO: chain[2] - 11637 GH/s (96.20 %)
[2022/05/17 22:03:07] INFO: chain[0] ->
[2022/05/17 22:03:07] INFO: domain[9] - set freq to 595 Mhz
[2022/05/17 22:03:07] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 22:03:07] INFO: chain[1] ->
[2022/05/17 22:03:07] INFO: ok
[2022/05/17 22:03:07] INFO: chain[2] ->
[2022/05/17 22:03:07] INFO: ok
[2022/05/17 22:04:56] INFO: =[ Tuner ]==============================
[2022/05/17 22:04:56] INFO: Starting auto-tuning
[2022/05/17 22:04:56] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 22:04:56] INFO: Detecting mininum voltage
[2022/05/17 22:09:37] INFO: voltage = 15300 mV
[2022/05/17 22:09:37] INFO: chain[0] - 11501 GH/s (95.08 %)
[2022/05/17 22:09:37] INFO: chain[1] - 11662 GH/s (96.41 %)
[2022/05/17 22:09:37] INFO: chain[2] - 11332 GH/s (93.68 %)
[2022/05/17 22:10:51] INFO: voltage = 15200 mV
[2022/05/17 22:10:51] INFO: chain[0] - 11540 GH/s (95.41 %)
[2022/05/17 22:10:51] INFO: chain[1] - 11711 GH/s (96.82 %)
[2022/05/17 22:10:51] INFO: chain[2] - 11377 GH/s (94.05 %)
[2022/05/17 22:12:06] INFO: voltage = 15100 mV
[2022/05/17 22:12:06] INFO: chain[0] - 11572 GH/s (95.67 %)
[2022/05/17 22:12:06] INFO: chain[1] - 11679 GH/s (96.55 %)
[2022/05/17 22:12:06] INFO: chain[2] - 11380 GH/s (94.08 %)
[2022/05/17 22:13:20] INFO: voltage = 15000 mV
[2022/05/17 22:13:20] INFO: chain[0] - 11600 GH/s (95.90 %)
[2022/05/17 22:13:20] INFO: chain[1] - 11740 GH/s (97.06 %)
[2022/05/17 22:13:20] INFO: chain[2] - 11449 GH/s (94.65 %)
[2022/05/17 22:14:36] INFO: voltage = 14900 mV
[2022/05/17 22:14:36] INFO: chain[0] - 11558 GH/s (95.55 %)
[2022/05/17 22:14:36] INFO: chain[1] - 11722 GH/s (96.91 %)
[2022/05/17 22:14:36] INFO: chain[2] - 11451 GH/s (94.66 %)
[2022/05/17 22:15:50] INFO: voltage = 14800 mV
[2022/05/17 22:15:50] INFO: chain[0] - 11579 GH/s (95.73 %)
[2022/05/17 22:15:50] INFO: chain[1] - 11737 GH/s (97.03 %)
[2022/05/17 22:15:50] INFO: chain[2] - 11498 GH/s (95.05 %)
[2022/05/17 22:17:05] INFO: voltage = 14700 mV
[2022/05/17 22:17:05] INFO: chain[0] - 11583 GH/s (95.76 %)
[2022/05/17 22:17:05] INFO: chain[1] - 11769 GH/s (97.30 %)
[2022/05/17 22:17:05] INFO: chain[2] - 11574 GH/s (95.68 %)
[2022/05/17 22:18:19] INFO: voltage = 14600 mV
[2022/05/17 22:18:19] INFO: chain[0] - 11514 GH/s (95.19 %)
[2022/05/17 22:18:19] INFO: chain[1] - 11823 GH/s (97.74 %)
[2022/05/17 22:18:19] INFO: chain[2] - 11564 GH/s (95.60 %)
[2022/05/17 22:19:35] INFO: voltage = 14500 mV
[2022/05/17 22:19:35] INFO: chain[0] - 11497 GH/s (95.05 %)
[2022/05/17 22:19:35] INFO: chain[1] - 11793 GH/s (97.49 %)
[2022/05/17 22:19:35] INFO: chain[2] - 11671 GH/s (96.49 %)
[2022/05/17 22:19:35] INFO: Minimum voltage is 14600 mV
[2022/05/17 22:19:45] INFO: Fixing unstable domains
[2022/05/17 22:24:51] INFO: -[ Round 1 ]---------------------------
[2022/05/17 22:24:51] INFO: Collecting metrics
[2022/05/17 22:26:00] INFO: voltage = 14600 mV
[2022/05/17 22:26:00] INFO: chain[0] - 11515 GH/s (95.19 %)
[2022/05/17 22:26:00] INFO: chain[1] - 11862 GH/s (98.06 %)
[2022/05/17 22:26:00] INFO: chain[2] - 11644 GH/s (96.26 %)
[2022/05/17 22:26:00] INFO: chain[0] ->
[2022/05/17 22:26:00] INFO: domain[9] - set freq to 595 Mhz
[2022/05/17 22:26:00] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 22:26:00] INFO: chain[1] ->
[2022/05/17 22:26:00] INFO: ok
[2022/05/17 22:26:00] INFO: chain[2] ->
[2022/05/17 22:26:00] INFO: ok
[2022/05/17 22:31:10] INFO: -[ Round 2 ]---------------------------
[2022/05/17 22:31:10] INFO: Collecting metrics
[2022/05/17 22:32:16] INFO: voltage = 14600 mV
[2022/05/17 22:32:16] INFO: chain[0] - 11491 GH/s (95.08 %)
[2022/05/17 22:32:16] INFO: chain[1] - 11842 GH/s (97.90 %)
[2022/05/17 22:32:16] INFO: chain[2] - 11616 GH/s (96.03 %)
[2022/05/17 22:32:16] INFO: chain[0] ->
[2022/05/17 22:32:16] INFO: domain[9] - set freq to 590 Mhz
[2022/05/17 22:32:16] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 22:32:16] INFO: chain[1] ->
[2022/05/17 22:32:16] INFO: ok
[2022/05/17 22:32:16] INFO: chain[2] ->
[2022/05/17 22:32:16] INFO: ok
[2022/05/17 22:37:26] INFO: -[ Round 3 ]---------------------------
[2022/05/17 22:37:26] INFO: Collecting metrics
[2022/05/17 22:38:32] INFO: voltage = 14600 mV
[2022/05/17 22:38:32] INFO: chain[0] - 11514 GH/s (95.35 %)
[2022/05/17 22:38:32] INFO: chain[1] - 11826 GH/s (97.77 %)
[2022/05/17 22:38:32] INFO: chain[2] - 11569 GH/s (95.64 %)
[2022/05/17 22:38:32] INFO: chain[0] ->
[2022/05/17 22:38:32] INFO: domain[9] - set freq to 585 Mhz
[2022/05/17 22:38:32] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 22:38:32] INFO: chain[1] ->
[2022/05/17 22:38:32] INFO: ok
[2022/05/17 22:38:32] INFO: chain[2] ->
[2022/05/17 22:38:32] INFO: ok
[2022/05/17 22:43:42] INFO: -[ Round 4 ]---------------------------
[2022/05/17 22:43:42] INFO: Collecting metrics
[2022/05/17 22:44:48] INFO: voltage = 14600 mV
[2022/05/17 22:44:48] INFO: chain[0] - 11511 GH/s (95.40 %)
[2022/05/17 22:44:48] INFO: chain[1] - 11871 GH/s (98.14 %)
[2022/05/17 22:44:48] INFO: chain[2] - 11589 GH/s (95.81 %)
[2022/05/17 22:44:48] INFO: chain[0] ->
[2022/05/17 22:44:48] INFO: domain[9] - set freq to 580 Mhz
[2022/05/17 22:44:48] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 22:44:48] INFO: chain[1] ->
[2022/05/17 22:44:48] INFO: ok
[2022/05/17 22:44:48] INFO: chain[2] ->
[2022/05/17 22:44:48] INFO: ok
[2022/05/17 22:46:30] INFO: =[ Tuner ]==============================
[2022/05/17 22:46:30] INFO: Starting auto-tuning
[2022/05/17 22:46:30] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 22:46:30] INFO: Detecting mininum voltage
[2022/05/17 22:51:10] INFO: voltage = 15300 mV
[2022/05/17 22:51:10] INFO: chain[0] - 11563 GH/s (95.59 %)
[2022/05/17 22:51:10] INFO: chain[1] - 11707 GH/s (96.79 %)
[2022/05/17 22:51:10] INFO: chain[2] - 11368 GH/s (93.98 %)
[2022/05/17 22:52:24] INFO: voltage = 15200 mV
[2022/05/17 22:52:24] INFO: chain[0] - 11573 GH/s (95.68 %)
[2022/05/17 22:52:24] INFO: chain[1] - 11712 GH/s (96.83 %)
[2022/05/17 22:52:24] INFO: chain[2] - 11345 GH/s (93.80 %)
[2022/05/17 22:53:38] INFO: voltage = 15100 mV
[2022/05/17 22:53:38] INFO: chain[0] - 11587 GH/s (95.79 %)
[2022/05/17 22:53:38] INFO: chain[1] - 11700 GH/s (96.73 %)
[2022/05/17 22:53:38] INFO: chain[2] - 11401 GH/s (94.25 %)
[2022/05/17 22:54:52] INFO: voltage = 15000 mV
[2022/05/17 22:54:52] INFO: chain[0] - 11600 GH/s (95.90 %)
[2022/05/17 22:54:52] INFO: chain[1] - 11759 GH/s (97.21 %)
[2022/05/17 22:54:52] INFO: chain[2] - 11425 GH/s (94.46 %)
[2022/05/17 22:56:05] INFO: voltage = 14900 mV
[2022/05/17 22:56:05] INFO: chain[0] - 11576 GH/s (95.70 %)
[2022/05/17 22:56:05] INFO: chain[1] - 11744 GH/s (97.09 %)
[2022/05/17 22:56:05] INFO: chain[2] - 11456 GH/s (94.71 %)
[2022/05/17 22:57:19] INFO: voltage = 14800 mV
[2022/05/17 22:57:19] INFO: chain[0] - 11636 GH/s (96.20 %)
[2022/05/17 22:57:19] INFO: chain[1] - 11774 GH/s (97.34 %)
[2022/05/17 22:57:19] INFO: chain[2] - 11499 GH/s (95.06 %)
[2022/05/17 22:58:33] INFO: voltage = 14700 mV
[2022/05/17 22:58:33] INFO: chain[0] - 11579 GH/s (95.72 %)
[2022/05/17 22:58:33] INFO: chain[1] - 11815 GH/s (97.68 %)
[2022/05/17 22:58:33] INFO: chain[2] - 11551 GH/s (95.50 %)
[2022/05/17 22:59:46] INFO: voltage = 14600 mV
[2022/05/17 22:59:46] INFO: chain[0] - 11535 GH/s (95.36 %)
[2022/05/17 22:59:46] INFO: chain[1] - 11814 GH/s (97.67 %)
[2022/05/17 22:59:46] INFO: chain[2] - 11573 GH/s (95.67 %)
[2022/05/17 23:01:00] INFO: voltage = 14500 mV
[2022/05/17 23:01:00] INFO: chain[0] - 11466 GH/s (94.79 %)
[2022/05/17 23:01:00] INFO: chain[1] - 11852 GH/s (97.98 %)
[2022/05/17 23:01:00] INFO: chain[2] - 11678 GH/s (96.55 %)
[2022/05/17 23:01:00] INFO: Minimum voltage is 14600 mV
[2022/05/17 23:01:07] INFO: Fixing unstable domains
[2022/05/17 23:02:42] INFO: =[ Tuner ]==============================
[2022/05/17 23:02:42] INFO: Starting auto-tuning
[2022/05/17 23:02:42] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 23:02:42] INFO: Detecting mininum voltage
[2022/05/17 23:04:33] INFO: =[ Tuner ]==============================
[2022/05/17 23:04:33] INFO: Starting auto-tuning
[2022/05/17 23:04:33] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 23:04:33] INFO: Detecting mininum voltage
[2022/05/17 23:09:16] INFO: voltage = 15300 mV
[2022/05/17 23:09:16] INFO: chain[0] - 11515 GH/s (95.19 %)
[2022/05/17 23:09:16] INFO: chain[1] - 11741 GH/s (97.06 %)
[2022/05/17 23:09:16] INFO: chain[2] - 11330 GH/s (93.66 %)
[2022/05/17 23:10:29] INFO: voltage = 15200 mV
[2022/05/17 23:10:29] INFO: chain[0] - 11512 GH/s (95.17 %)
[2022/05/17 23:10:29] INFO: chain[1] - 11699 GH/s (96.72 %)
[2022/05/17 23:10:29] INFO: chain[2] - 11380 GH/s (94.08 %)
[2022/05/17 23:11:45] INFO: voltage = 15100 mV
[2022/05/17 23:11:45] INFO: chain[0] - 11567 GH/s (95.63 %)
[2022/05/17 23:11:45] INFO: chain[1] - 11735 GH/s (97.01 %)
[2022/05/17 23:11:45] INFO: chain[2] - 11374 GH/s (94.03 %)
[2022/05/17 23:12:59] INFO: voltage = 15000 mV
[2022/05/17 23:12:59] INFO: chain[0] - 11546 GH/s (95.45 %)
[2022/05/17 23:12:59] INFO: chain[1] - 11730 GH/s (96.97 %)
[2022/05/17 23:12:59] INFO: chain[2] - 11492 GH/s (95.01 %)
[2022/05/17 23:14:14] INFO: voltage = 14900 mV
[2022/05/17 23:14:14] INFO: chain[0] - 11575 GH/s (95.69 %)
[2022/05/17 23:14:14] INFO: chain[1] - 11772 GH/s (97.32 %)
[2022/05/17 23:14:14] INFO: chain[2] - 11504 GH/s (95.11 %)
[2022/05/17 23:15:28] INFO: voltage = 14800 mV
[2022/05/17 23:15:28] INFO: chain[0] - 11618 GH/s (96.05 %)
[2022/05/17 23:15:28] INFO: chain[1] - 11742 GH/s (97.07 %)
[2022/05/17 23:15:28] INFO: chain[2] - 11530 GH/s (95.32 %)
[2022/05/17 23:16:44] INFO: voltage = 14700 mV
[2022/05/17 23:16:44] INFO: chain[0] - 11552 GH/s (95.50 %)
[2022/05/17 23:16:44] INFO: chain[1] - 11855 GH/s (98.01 %)
[2022/05/17 23:16:44] INFO: chain[2] - 11537 GH/s (95.38 %)
[2022/05/17 23:17:58] INFO: voltage = 14600 mV
[2022/05/17 23:17:58] INFO: chain[0] - 11509 GH/s (95.15 %)
[2022/05/17 23:17:58] INFO: chain[1] - 11833 GH/s (97.82 %)
[2022/05/17 23:17:58] INFO: chain[2] - 11634 GH/s (96.18 %)
[2022/05/17 23:19:13] INFO: voltage = 14500 mV
[2022/05/17 23:19:13] INFO: chain[0] - 11503 GH/s (95.10 %)
[2022/05/17 23:19:13] INFO: chain[1] - 11872 GH/s (98.15 %)
[2022/05/17 23:19:13] INFO: chain[2] - 11652 GH/s (96.33 %)
[2022/05/17 23:19:13] INFO: Minimum voltage is 14600 mV
[2022/05/17 23:19:22] INFO: Fixing unstable domains
[2022/05/17 23:24:28] INFO: -[ Round 1 ]---------------------------
[2022/05/17 23:24:28] INFO: Collecting metrics
[2022/05/17 23:25:37] INFO: voltage = 14600 mV
[2022/05/17 23:25:37] INFO: chain[0] - 11556 GH/s (95.54 %)
[2022/05/17 23:25:37] INFO: chain[1] - 11852 GH/s (97.98 %)
[2022/05/17 23:25:37] INFO: chain[2] - 11630 GH/s (96.15 %)
[2022/05/17 23:25:37] INFO: chain[0] ->
[2022/05/17 23:25:37] INFO: domain[9] - set freq to 595 Mhz
[2022/05/17 23:25:37] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 23:25:37] INFO: chain[1] ->
[2022/05/17 23:25:37] INFO: ok
[2022/05/17 23:25:37] INFO: chain[2] ->
[2022/05/17 23:25:37] INFO: ok
[2022/05/17 23:30:46] INFO: -[ Round 2 ]---------------------------
[2022/05/17 23:30:46] INFO: Collecting metrics
[2022/05/17 23:31:53] INFO: voltage = 14600 mV
[2022/05/17 23:31:53] INFO: chain[0] - 11501 GH/s (95.16 %)
[2022/05/17 23:31:53] INFO: chain[1] - 11836 GH/s (97.85 %)
[2022/05/17 23:31:53] INFO: chain[2] - 11576 GH/s (95.70 %)
[2022/05/17 23:31:53] INFO: chain[0] ->
[2022/05/17 23:31:53] INFO: domain[9] - set freq to 590 Mhz
[2022/05/17 23:31:53] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 23:31:53] INFO: chain[1] ->
[2022/05/17 23:31:53] INFO: ok
[2022/05/17 23:31:53] INFO: chain[2] ->
[2022/05/17 23:31:53] INFO: ok
[2022/05/17 23:37:02] INFO: -[ Round 3 ]---------------------------
[2022/05/17 23:37:02] INFO: Collecting metrics
[2022/05/17 23:38:09] INFO: voltage = 14600 mV
[2022/05/17 23:38:09] INFO: chain[0] - 11491 GH/s (95.16 %)
[2022/05/17 23:38:09] INFO: chain[1] - 11835 GH/s (97.84 %)
[2022/05/17 23:38:09] INFO: chain[2] - 11614 GH/s (96.01 %)
[2022/05/17 23:38:09] INFO: chain[0] ->
[2022/05/17 23:38:09] INFO: domain[9] - set freq to 585 Mhz
[2022/05/17 23:38:09] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 23:38:09] INFO: chain[1] ->
[2022/05/17 23:38:09] INFO: ok
[2022/05/17 23:38:09] INFO: chain[2] ->
[2022/05/17 23:38:09] INFO: ok
[2022/05/17 23:43:18] INFO: -[ Round 4 ]---------------------------
[2022/05/17 23:43:18] INFO: Collecting metrics
[2022/05/17 23:44:25] INFO: voltage = 14600 mV
[2022/05/17 23:44:25] INFO: chain[0] - 11465 GH/s (95.02 %)
[2022/05/17 23:44:25] INFO: chain[1] - 11811 GH/s (97.64 %)
[2022/05/17 23:44:25] INFO: chain[2] - 11668 GH/s (96.47 %)
[2022/05/17 23:44:25] INFO: chain[0] ->
[2022/05/17 23:44:25] INFO: domain[9] - set freq to 580 Mhz
[2022/05/17 23:44:25] INFO: fixed (unbalanced=0, unstable=1)
[2022/05/17 23:44:25] INFO: chain[1] ->
[2022/05/17 23:44:25] INFO: ok
[2022/05/17 23:44:25] INFO: chain[2] ->
[2022/05/17 23:44:25] INFO: ok
[2022/05/17 23:46:07] INFO: =[ Tuner ]==============================
[2022/05/17 23:46:07] INFO: Starting auto-tuning
[2022/05/17 23:46:07] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 23:46:07] INFO: Detecting mininum voltage
[2022/05/17 23:47:58] INFO: =[ Tuner ]==============================
[2022/05/17 23:47:58] INFO: Starting auto-tuning
[2022/05/17 23:47:58] INFO: Preset: Profile 36Th @ 600MHz
[2022/05/17 23:47:58] INFO: Detecting mininum voltage
|
|
|
|
I'll try out different firmware and see what happens.
the initial tuning for each profile can take a while, but when it's done once, it's done for good How long exactly? I'm on ASIC.to and it's been tuning for almost 30 hours now. is that normal? I can't tell for sure without seeing the tuning log, you can find them in Miner configuration > mining profiles > at the bottom of the page, copy and paste them here, please use the code tag when doing so, without it will be messy and hard to read. Hello Mike! Sure. Here you go: [2022/05/19 18:09:35] INFO: Start mining!
[2022/05/19 18:10:35] INFO: Changing voltage from 15500 to 15300 mV gradually
[2022/05/19 18:12:53] INFO: Changing voltage from 15300 to 15200 mV gradually
[2022/05/19 18:14:07] INFO: Changing voltage from 15200 to 15100 mV gradually
[2022/05/19 18:15:21] INFO: Changing voltage from 15100 to 15000 mV gradually
[2022/05/19 18:16:35] INFO: Changing voltage from 15000 to 14900 mV gradually
[2022/05/19 18:17:48] INFO: Changing voltage from 14900 to 14800 mV gradually
[2022/05/19 18:19:02] INFO: Changing voltage from 14800 to 14700 mV gradually
[2022/05/19 18:20:15] INFO: Changing voltage from 14700 to 14600 mV gradually
[2022/05/19 18:21:29] INFO: Changing voltage from 14600 to 14500 mV gradually
[2022/05/19 18:22:43] INFO: Shutting down the miner
[2022/05/19 18:22:43] INFO: Setting freq to 50 Mhz gradually
[2022/05/19 18:22:48] INFO: Stopping FPGA queue
[2022/05/19 18:22:48] INFO: chain[0] - Shutting down the chain
[2022/05/19 18:22:48] INFO: chain[1] - Shutting down the chain
[2022/05/19 18:22:49] INFO: chain[2] - Shutting down the chain
[2022/05/19 18:22:49] INFO: Power OFF
[2022/05/19 18:22:55] INFO: Power ON
[2022/05/19 18:22:57] INFO: Starting FPGA queue
[2022/05/19 18:22:57] INFO: Initializing hash boards
[2022/05/19 18:22:57] INFO: chain[2] - Initializing
[2022/05/19 18:22:57] INFO: chain[1] - Initializing
[2022/05/19 18:22:57] INFO: chain[0] - Initializing
[2022/05/19 18:23:11] INFO: chain[2] - 30 chips detected
[2022/05/19 18:23:12] INFO: chain[1] - 30 chips detected
[2022/05/19 18:23:13] INFO: chain[0] - 30 chips detected
[2022/05/19 18:23:19] INFO: Start-up temperature is 43 C (min -15 C)
[2022/05/19 18:23:19] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:23:19] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:23:26] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:23:26] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:23:57] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:24:09] INFO: Switching to immersion fan control
[2022/05/19 18:24:09] INFO: Start mining!
[2022/05/19 18:24:25] INFO: Detected 256 Mb of RAM
[2022/05/19 18:24:25] INFO: Switching to immersion fan control
[2022/05/19 18:24:31] INFO: Power ON
[2022/05/19 18:24:33] INFO: Starting FPGA queue
[2022/05/19 18:24:33] INFO: Initializing hash boards
[2022/05/19 18:24:33] INFO: chain[2] - Initializing
[2022/05/19 18:24:33] INFO: chain[1] - Initializing
[2022/05/19 18:24:33] INFO: chain[0] - Initializing
[2022/05/19 18:24:47] INFO: chain[2] - 30 chips detected
[2022/05/19 18:24:48] INFO: chain[1] - 30 chips detected
[2022/05/19 18:24:50] INFO: chain[0] - 30 chips detected
[2022/05/19 18:24:57] INFO: Start-up temperature is 42 C (min -15 C)
[2022/05/19 18:24:57] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:24:57] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:25:04] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:25:04] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:25:35] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:25:46] INFO: Switching to immersion fan control
[2022/05/19 18:25:46] INFO: Start mining!
[2022/05/19 18:26:16] INFO: Detected 256 Mb of RAM
[2022/05/19 18:26:16] INFO: Switching to immersion fan control
[2022/05/19 18:26:22] INFO: Power ON
[2022/05/19 18:26:24] INFO: Starting FPGA queue
[2022/05/19 18:26:24] INFO: Initializing hash boards
[2022/05/19 18:26:24] INFO: chain[2] - Initializing
[2022/05/19 18:26:24] INFO: chain[1] - Initializing
[2022/05/19 18:26:24] INFO: chain[0] - Initializing
[2022/05/19 18:26:38] INFO: chain[2] - 30 chips detected
[2022/05/19 18:26:40] INFO: chain[1] - 30 chips detected
[2022/05/19 18:26:42] INFO: chain[0] - 30 chips detected
[2022/05/19 18:26:48] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 18:26:48] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:26:48] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:26:55] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:26:55] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:27:26] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:27:38] INFO: Switching to immersion fan control
[2022/05/19 18:27:38] INFO: Start mining!
[2022/05/19 18:28:06] INFO: Detected 256 Mb of RAM
[2022/05/19 18:28:06] INFO: Switching to immersion fan control
[2022/05/19 18:28:12] INFO: Power ON
[2022/05/19 18:28:14] INFO: Starting FPGA queue
[2022/05/19 18:28:14] INFO: Initializing hash boards
[2022/05/19 18:28:14] INFO: chain[2] - Initializing
[2022/05/19 18:28:14] INFO: chain[1] - Initializing
[2022/05/19 18:28:14] INFO: chain[0] - Initializing
[2022/05/19 18:28:28] INFO: chain[2] - 30 chips detected
[2022/05/19 18:28:30] INFO: chain[1] - 30 chips detected
[2022/05/19 18:28:32] INFO: chain[0] - 30 chips detected
[2022/05/19 18:28:38] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 18:28:38] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:28:38] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:28:45] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:28:46] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:29:16] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:29:28] INFO: Switching to immersion fan control
[2022/05/19 18:29:28] INFO: Start mining!
[2022/05/19 18:29:56] INFO: Detected 256 Mb of RAM
[2022/05/19 18:29:56] INFO: Switching to immersion fan control
[2022/05/19 18:30:02] INFO: Power ON
[2022/05/19 18:30:04] INFO: Starting FPGA queue
[2022/05/19 18:30:04] INFO: Initializing hash boards
[2022/05/19 18:30:04] INFO: chain[2] - Initializing
[2022/05/19 18:30:04] INFO: chain[1] - Initializing
[2022/05/19 18:30:04] INFO: chain[0] - Initializing
[2022/05/19 18:30:18] INFO: chain[2] - 30 chips detected
[2022/05/19 18:30:20] INFO: chain[1] - 30 chips detected
[2022/05/19 18:30:22] INFO: chain[0] - 30 chips detected
[2022/05/19 18:30:28] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 18:30:28] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:30:28] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:30:36] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:31:06] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:31:18] INFO: Switching to immersion fan control
[2022/05/19 18:31:18] INFO: Start mining!
[2022/05/19 18:31:20] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:31:46] INFO: Detected 256 Mb of RAM
[2022/05/19 18:31:46] INFO: Switching to immersion fan control
[2022/05/19 18:31:52] INFO: Power ON
[2022/05/19 18:31:54] INFO: Starting FPGA queue
[2022/05/19 18:31:54] INFO: Initializing hash boards
[2022/05/19 18:31:54] INFO: chain[2] - Initializing
[2022/05/19 18:31:54] INFO: chain[1] - Initializing
[2022/05/19 18:31:54] INFO: chain[0] - Initializing
[2022/05/19 18:32:09] INFO: chain[2] - 30 chips detected
[2022/05/19 18:32:11] INFO: chain[1] - 30 chips detected
[2022/05/19 18:32:13] INFO: chain[0] - 30 chips detected
[2022/05/19 18:32:19] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 18:32:19] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:32:19] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:32:26] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:32:26] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:32:57] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:33:08] INFO: Switching to immersion fan control
[2022/05/19 18:33:08] INFO: Start mining!
[2022/05/19 18:33:37] INFO: Detected 256 Mb of RAM
[2022/05/19 18:33:37] INFO: Switching to immersion fan control
[2022/05/19 18:33:43] INFO: Power ON
[2022/05/19 18:33:45] INFO: Starting FPGA queue
[2022/05/19 18:33:45] INFO: Initializing hash boards
[2022/05/19 18:33:45] INFO: chain[2] - Initializing
[2022/05/19 18:33:45] INFO: chain[1] - Initializing
[2022/05/19 18:33:45] INFO: chain[0] - Initializing
[2022/05/19 18:33:59] INFO: chain[2] - 30 chips detected
[2022/05/19 18:34:01] INFO: chain[1] - 30 chips detected
[2022/05/19 18:34:03] INFO: chain[0] - 30 chips detected
[2022/05/19 18:34:09] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 18:34:09] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:34:09] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:34:16] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:34:16] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:34:47] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:34:50] ERROR: driver-btm-base.c:653 chain[0] sen[2] - Invalid temp reading, rem 0x81 0x73 loc 0x00 0x68
[2022/05/19 18:34:59] INFO: Switching to immersion fan control
[2022/05/19 18:34:59] INFO: Start mining!
[2022/05/19 18:35:27] INFO: Detected 256 Mb of RAM
[2022/05/19 18:35:27] INFO: Switching to immersion fan control
[2022/05/19 18:35:33] INFO: Power ON
[2022/05/19 18:35:35] INFO: Starting FPGA queue
[2022/05/19 18:35:35] INFO: Initializing hash boards
[2022/05/19 18:35:35] INFO: chain[2] - Initializing
[2022/05/19 18:35:35] INFO: chain[1] - Initializing
[2022/05/19 18:35:35] INFO: chain[0] - Initializing
[2022/05/19 18:35:49] INFO: chain[2] - 30 chips detected
[2022/05/19 18:35:50] INFO: chain[1] - 30 chips detected
[2022/05/19 18:35:52] INFO: chain[0] - 30 chips detected
[2022/05/19 18:35:58] INFO: Start-up temperature is 39 C (min -15 C)
[2022/05/19 18:35:58] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:35:58] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:36:05] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:36:06] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:36:36] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:36:48] INFO: Switching to immersion fan control
[2022/05/19 18:36:48] INFO: Start mining!
[2022/05/19 18:37:17] INFO: Detected 256 Mb of RAM
[2022/05/19 18:37:17] INFO: Switching to immersion fan control
[2022/05/19 18:37:23] INFO: Power ON
[2022/05/19 18:37:25] INFO: Starting FPGA queue
[2022/05/19 18:37:25] INFO: Initializing hash boards
[2022/05/19 18:37:25] INFO: chain[2] - Initializing
[2022/05/19 18:37:25] INFO: chain[1] - Initializing
[2022/05/19 18:37:25] INFO: chain[0] - Initializing
[2022/05/19 18:37:39] INFO: chain[2] - 30 chips detected
[2022/05/19 18:37:41] INFO: chain[1] - 30 chips detected
[2022/05/19 18:37:43] INFO: chain[0] - 30 chips detected
[2022/05/19 18:37:50] INFO: Start-up temperature is 39 C (min -15 C)
[2022/05/19 18:37:50] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:37:50] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:37:57] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:37:57] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:38:28] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:38:39] INFO: Switching to immersion fan control
[2022/05/19 18:38:39] INFO: Start mining!
[2022/05/19 18:39:07] INFO: Detected 256 Mb of RAM
[2022/05/19 18:39:07] INFO: Switching to immersion fan control
[2022/05/19 18:39:13] INFO: Power ON
[2022/05/19 18:39:16] INFO: Starting FPGA queue
[2022/05/19 18:39:16] INFO: Initializing hash boards
[2022/05/19 18:39:16] INFO: chain[2] - Initializing
[2022/05/19 18:39:16] INFO: chain[1] - Initializing
[2022/05/19 18:39:16] INFO: chain[0] - Initializing
[2022/05/19 18:39:30] INFO: chain[2] - 30 chips detected
[2022/05/19 18:39:32] INFO: chain[1] - 30 chips detected
[2022/05/19 18:39:34] INFO: chain[0] - 30 chips detected
[2022/05/19 18:39:40] INFO: Start-up temperature is 38 C (min -15 C)
[2022/05/19 18:39:40] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:39:40] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:40:18] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:40:29] INFO: Switching to immersion fan control
[2022/05/19 18:40:29] INFO: Start mining!
[2022/05/19 18:41:29] INFO: Changing voltage from 15500 to 15300 mV gradually
[2022/05/19 18:43:47] INFO: Changing voltage from 15300 to 15200 mV gradually
[2022/05/19 18:45:01] INFO: Changing voltage from 15200 to 15100 mV gradually
[2022/05/19 18:46:15] INFO: Changing voltage from 15100 to 15000 mV gradually
[2022/05/19 18:47:29] INFO: Changing voltage from 15000 to 14900 mV gradually
[2022/05/19 18:48:42] INFO: Changing voltage from 14900 to 14800 mV gradually
[2022/05/19 18:49:57] INFO: Changing voltage from 14800 to 14700 mV gradually
[2022/05/19 18:51:12] INFO: Changing voltage from 14700 to 14600 mV gradually
[2022/05/19 18:52:27] INFO: Changing voltage from 14600 to 14500 mV gradually
[2022/05/19 18:53:41] INFO: Shutting down the miner
[2022/05/19 18:53:41] INFO: Setting freq to 50 Mhz gradually
[2022/05/19 18:53:49] INFO: Stopping FPGA queue
[2022/05/19 18:53:49] INFO: chain[0] - Shutting down the chain
[2022/05/19 18:53:49] INFO: chain[1] - Shutting down the chain
[2022/05/19 18:53:50] INFO: chain[2] - Shutting down the chain
[2022/05/19 18:53:50] INFO: Power OFF
[2022/05/19 18:53:56] INFO: Power ON
[2022/05/19 18:53:58] INFO: Starting FPGA queue
[2022/05/19 18:53:58] INFO: Initializing hash boards
[2022/05/19 18:53:58] INFO: chain[2] - Initializing
[2022/05/19 18:53:58] INFO: chain[1] - Initializing
[2022/05/19 18:53:58] INFO: chain[0] - Initializing
[2022/05/19 18:54:11] INFO: chain[2] - 30 chips detected
[2022/05/19 18:54:12] INFO: chain[1] - 30 chips detected
[2022/05/19 18:54:14] INFO: chain[0] - 30 chips detected
[2022/05/19 18:54:20] INFO: Start-up temperature is 43 C (min -15 C)
[2022/05/19 18:54:20] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:54:20] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:54:27] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:54:27] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:54:58] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:55:09] INFO: Switching to immersion fan control
[2022/05/19 18:55:09] INFO: Start mining!
[2022/05/19 18:55:39] INFO: Detected 256 Mb of RAM
[2022/05/19 18:55:39] INFO: Switching to immersion fan control
[2022/05/19 18:55:45] INFO: Power ON
[2022/05/19 18:55:47] INFO: Starting FPGA queue
[2022/05/19 18:55:47] INFO: Initializing hash boards
[2022/05/19 18:55:47] INFO: chain[2] - Initializing
[2022/05/19 18:55:47] INFO: chain[1] - Initializing
[2022/05/19 18:55:47] INFO: chain[0] - Initializing
[2022/05/19 18:56:02] INFO: chain[2] - 30 chips detected
[2022/05/19 18:56:04] INFO: chain[1] - 30 chips detected
[2022/05/19 18:56:06] INFO: chain[0] - 30 chips detected
[2022/05/19 18:56:12] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 18:56:12] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:56:12] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:56:50] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:57:01] INFO: Switching to immersion fan control
[2022/05/19 18:57:01] INFO: Start mining!
[2022/05/19 18:58:01] INFO: Changing voltage from 15500 to 15300 mV gradually
[2022/05/19 19:00:20] INFO: Changing voltage from 15300 to 15200 mV gradually
[2022/05/19 19:01:35] INFO: Changing voltage from 15200 to 15100 mV gradually
[2022/05/19 19:02:50] INFO: Changing voltage from 15100 to 15000 mV gradually
[2022/05/19 19:04:04] INFO: Changing voltage from 15000 to 14900 mV gradually
[2022/05/19 19:05:20] INFO: Changing voltage from 14900 to 14800 mV gradually
[2022/05/19 19:06:34] INFO: Changing voltage from 14800 to 14700 mV gradually
[2022/05/19 19:07:49] INFO: Changing voltage from 14700 to 14600 mV gradually
[2022/05/19 19:09:03] INFO: Changing voltage from 14600 to 14500 mV gradually
[2022/05/19 19:10:19] INFO: Shutting down the miner
[2022/05/19 19:10:19] INFO: Setting freq to 50 Mhz gradually
[2022/05/19 19:10:27] INFO: Stopping FPGA queue
[2022/05/19 19:10:27] INFO: chain[0] - Shutting down the chain
[2022/05/19 19:10:28] INFO: chain[1] - Shutting down the chain
[2022/05/19 19:10:28] INFO: chain[2] - Shutting down the chain
[2022/05/19 19:10:29] INFO: Power OFF
[2022/05/19 19:10:35] INFO: Power ON
[2022/05/19 19:10:37] INFO: Starting FPGA queue
[2022/05/19 19:10:37] INFO: Initializing hash boards
[2022/05/19 19:10:37] INFO: chain[2] - Initializing
[2022/05/19 19:10:37] INFO: chain[1] - Initializing
[2022/05/19 19:10:37] INFO: chain[0] - Initializing
[2022/05/19 19:10:50] INFO: chain[2] - 30 chips detected
[2022/05/19 19:10:51] INFO: chain[1] - 30 chips detected
[2022/05/19 19:10:52] INFO: chain[0] - 30 chips detected
[2022/05/19 19:10:58] INFO: Start-up temperature is 43 C (min -15 C)
[2022/05/19 19:10:58] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:10:58] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:11:06] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:11:06] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:11:36] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:11:48] INFO: Switching to immersion fan control
[2022/05/19 19:11:48] INFO: Start mining!
[2022/05/19 19:12:11] INFO: Detected 256 Mb of RAM
[2022/05/19 19:12:11] INFO: Switching to immersion fan control
[2022/05/19 19:12:17] INFO: Power ON
[2022/05/19 19:12:19] INFO: Starting FPGA queue
[2022/05/19 19:12:19] INFO: Initializing hash boards
[2022/05/19 19:12:19] INFO: chain[2] - Initializing
[2022/05/19 19:12:19] INFO: chain[1] - Initializing
[2022/05/19 19:12:19] INFO: chain[0] - Initializing
[2022/05/19 19:12:33] INFO: chain[2] - 30 chips detected
[2022/05/19 19:12:34] INFO: chain[1] - 30 chips detected
[2022/05/19 19:12:36] INFO: chain[0] - 30 chips detected
[2022/05/19 19:12:43] INFO: Start-up temperature is 42 C (min -15 C)
[2022/05/19 19:12:43] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:12:43] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:12:50] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:12:50] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:13:21] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:13:32] INFO: Switching to immersion fan control
[2022/05/19 19:13:32] INFO: Start mining!
[2022/05/19 19:14:02] INFO: Detected 256 Mb of RAM
[2022/05/19 19:14:02] INFO: Switching to immersion fan control
[2022/05/19 19:14:08] INFO: Power ON
[2022/05/19 19:14:10] INFO: Starting FPGA queue
[2022/05/19 19:14:10] INFO: Initializing hash boards
[2022/05/19 19:14:10] INFO: chain[2] - Initializing
[2022/05/19 19:14:10] INFO: chain[1] - Initializing
[2022/05/19 19:14:10] INFO: chain[0] - Initializing
[2022/05/19 19:14:24] INFO: chain[2] - 30 chips detected
[2022/05/19 19:14:26] INFO: chain[1] - 30 chips detected
[2022/05/19 19:14:28] INFO: chain[0] - 30 chips detected
[2022/05/19 19:14:34] INFO: Start-up temperature is 42 C (min -15 C)
[2022/05/19 19:14:34] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:14:34] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:14:41] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:14:41] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:15:12] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:15:24] INFO: Switching to immersion fan control
[2022/05/19 19:15:24] INFO: Start mining!
[2022/05/19 19:15:52] INFO: Detected 256 Mb of RAM
[2022/05/19 19:15:52] INFO: Switching to immersion fan control
[2022/05/19 19:15:58] INFO: Power ON
[2022/05/19 19:16:00] INFO: Starting FPGA queue
[2022/05/19 19:16:00] INFO: Initializing hash boards
[2022/05/19 19:16:00] INFO: chain[2] - Initializing
[2022/05/19 19:16:00] INFO: chain[1] - Initializing
[2022/05/19 19:16:00] INFO: chain[0] - Initializing
[2022/05/19 19:16:14] INFO: chain[2] - 30 chips detected
[2022/05/19 19:16:16] INFO: chain[1] - 30 chips detected
[2022/05/19 19:16:18] INFO: chain[0] - 30 chips detected
[2022/05/19 19:16:24] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 19:16:24] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:16:24] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:16:32] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:17:02] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:17:11] ERROR: src/temp.c:172 chain[0] sen[2] - Disabling faulty sensor, pcb=43 chip=-64
[2022/05/19 19:17:14] INFO: Switching to immersion fan control
[2022/05/19 19:17:14] INFO: Start mining!
[2022/05/19 19:17:42] INFO: Detected 256 Mb of RAM
[2022/05/19 19:17:42] INFO: Switching to immersion fan control
[2022/05/19 19:17:48] INFO: Power ON
[2022/05/19 19:17:50] INFO: Starting FPGA queue
[2022/05/19 19:17:50] INFO: Initializing hash boards
[2022/05/19 19:17:50] INFO: chain[2] - Initializing
[2022/05/19 19:17:50] INFO: chain[1] - Initializing
[2022/05/19 19:17:50] INFO: chain[0] - Initializing
[2022/05/19 19:18:04] INFO: chain[2] - 30 chips detected
[2022/05/19 19:18:06] INFO: chain[1] - 30 chips detected
[2022/05/19 19:18:08] INFO: chain[0] - 30 chips detected
[2022/05/19 19:18:15] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 19:18:15] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:18:15] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:18:22] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:18:22] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:18:52] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:19:04] INFO: Switching to immersion fan control
[2022/05/19 19:19:04] INFO: Start mining!
[2022/05/19 19:19:32] INFO: Detected 256 Mb of RAM
[2022/05/19 19:19:32] INFO: Switching to immersion fan control
[2022/05/19 19:19:38] INFO: Power ON
[2022/05/19 19:19:41] INFO: Starting FPGA queue
[2022/05/19 19:19:41] INFO: Initializing hash boards
[2022/05/19 19:19:41] INFO: chain[2] - Initializing
[2022/05/19 19:19:41] INFO: chain[1] - Initializing
[2022/05/19 19:19:41] INFO: chain[0] - Initializing
[2022/05/19 19:19:55] INFO: chain[2] - 30 chips detected
[2022/05/19 19:19:57] INFO: chain[1] - 30 chips detected
[2022/05/19 19:19:59] INFO: chain[0] - 30 chips detected
[2022/05/19 19:20:05] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 19:20:05] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:20:05] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:20:12] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:20:12] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:20:43] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:20:54] INFO: Switching to immersion fan control
[2022/05/19 19:20:54] INFO: Start mining!
[2022/05/19 19:21:23] INFO: Detected 256 Mb of RAM
[2022/05/19 19:21:23] INFO: Switching to immersion fan control
[2022/05/19 19:21:29] INFO: Power ON
[2022/05/19 19:21:31] INFO: Starting FPGA queue
[2022/05/19 19:21:31] INFO: Initializing hash boards
[2022/05/19 19:21:31] INFO: chain[2] - Initializing
[2022/05/19 19:21:31] INFO: chain[1] - Initializing
[2022/05/19 19:21:31] INFO: chain[0] - Initializing
[2022/05/19 19:21:45] INFO: chain[2] - 30 chips detected
[2022/05/19 19:21:47] INFO: chain[1] - 30 chips detected
[2022/05/19 19:21:49] INFO: chain[0] - 30 chips detected
[2022/05/19 19:21:55] INFO: Start-up temperature is 39 C (min -15 C)
[2022/05/19 19:21:55] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:21:55] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:22:02] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec Thanks! |
|
|
|
I'm not so familiar with ASIC.to firmware but I would like to ask if you are running t17 at immersion cooling? I just notice that it didn't detect fan speed under your screenshot it might be the cause of the problem why it keeps restarting. According to Asic.to this one below it will automatically restart in case of any failure. 7) Added a trigger for the maximum number of miner restarts in case of a board failure. So there might be other issue under your hashboard that cause miner auto restart. Hello. Yes, I removed the fans and enabled immersion mode. I decided to turn off profile preset and manually set freq and voltage. It has been running smoothly for 12 hours now. hashing at 38T drawing 1.9kw. |
|
|
|
I flashed ASIC.to on my T17 and it's giving 33-36T but it keep restarting for 2 days straight. here is the log; [2022/05/19 18:09:35] INFO: Start mining!
[2022/05/19 18:10:35] INFO: Changing voltage from 15500 to 15300 mV gradually
[2022/05/19 18:12:53] INFO: Changing voltage from 15300 to 15200 mV gradually
[2022/05/19 18:14:07] INFO: Changing voltage from 15200 to 15100 mV gradually
[2022/05/19 18:15:21] INFO: Changing voltage from 15100 to 15000 mV gradually
[2022/05/19 18:16:35] INFO: Changing voltage from 15000 to 14900 mV gradually
[2022/05/19 18:17:48] INFO: Changing voltage from 14900 to 14800 mV gradually
[2022/05/19 18:19:02] INFO: Changing voltage from 14800 to 14700 mV gradually
[2022/05/19 18:20:15] INFO: Changing voltage from 14700 to 14600 mV gradually
[2022/05/19 18:21:29] INFO: Changing voltage from 14600 to 14500 mV gradually
[2022/05/19 18:22:43] INFO: Shutting down the miner
[2022/05/19 18:22:43] INFO: Setting freq to 50 Mhz gradually
[2022/05/19 18:22:48] INFO: Stopping FPGA queue
[2022/05/19 18:22:48] INFO: chain[0] - Shutting down the chain
[2022/05/19 18:22:48] INFO: chain[1] - Shutting down the chain
[2022/05/19 18:22:49] INFO: chain[2] - Shutting down the chain
[2022/05/19 18:22:49] INFO: Power OFF
[2022/05/19 18:22:55] INFO: Power ON
[2022/05/19 18:22:57] INFO: Starting FPGA queue
[2022/05/19 18:22:57] INFO: Initializing hash boards
[2022/05/19 18:22:57] INFO: chain[2] - Initializing
[2022/05/19 18:22:57] INFO: chain[1] - Initializing
[2022/05/19 18:22:57] INFO: chain[0] - Initializing
[2022/05/19 18:23:11] INFO: chain[2] - 30 chips detected
[2022/05/19 18:23:12] INFO: chain[1] - 30 chips detected
[2022/05/19 18:23:13] INFO: chain[0] - 30 chips detected
[2022/05/19 18:23:19] INFO: Start-up temperature is 43 C (min -15 C)
[2022/05/19 18:23:19] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:23:19] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:23:26] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:23:26] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:23:57] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:24:09] INFO: Switching to immersion fan control
[2022/05/19 18:24:09] INFO: Start mining!
[2022/05/19 18:24:25] INFO: Detected 256 Mb of RAM
[2022/05/19 18:24:25] INFO: Switching to immersion fan control
[2022/05/19 18:24:31] INFO: Power ON
[2022/05/19 18:24:33] INFO: Starting FPGA queue
[2022/05/19 18:24:33] INFO: Initializing hash boards
[2022/05/19 18:24:33] INFO: chain[2] - Initializing
[2022/05/19 18:24:33] INFO: chain[1] - Initializing
[2022/05/19 18:24:33] INFO: chain[0] - Initializing
[2022/05/19 18:24:47] INFO: chain[2] - 30 chips detected
[2022/05/19 18:24:48] INFO: chain[1] - 30 chips detected
[2022/05/19 18:24:50] INFO: chain[0] - 30 chips detected
[2022/05/19 18:24:57] INFO: Start-up temperature is 42 C (min -15 C)
[2022/05/19 18:24:57] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:24:57] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:25:04] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:25:04] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:25:35] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:25:46] INFO: Switching to immersion fan control
[2022/05/19 18:25:46] INFO: Start mining!
[2022/05/19 18:26:16] INFO: Detected 256 Mb of RAM
[2022/05/19 18:26:16] INFO: Switching to immersion fan control
[2022/05/19 18:26:22] INFO: Power ON
[2022/05/19 18:26:24] INFO: Starting FPGA queue
[2022/05/19 18:26:24] INFO: Initializing hash boards
[2022/05/19 18:26:24] INFO: chain[2] - Initializing
[2022/05/19 18:26:24] INFO: chain[1] - Initializing
[2022/05/19 18:26:24] INFO: chain[0] - Initializing
[2022/05/19 18:26:38] INFO: chain[2] - 30 chips detected
[2022/05/19 18:26:40] INFO: chain[1] - 30 chips detected
[2022/05/19 18:26:42] INFO: chain[0] - 30 chips detected
[2022/05/19 18:26:48] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 18:26:48] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:26:48] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:26:55] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:26:55] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:27:26] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:27:38] INFO: Switching to immersion fan control
[2022/05/19 18:27:38] INFO: Start mining!
[2022/05/19 18:28:06] INFO: Detected 256 Mb of RAM
[2022/05/19 18:28:06] INFO: Switching to immersion fan control
[2022/05/19 18:28:12] INFO: Power ON
[2022/05/19 18:28:14] INFO: Starting FPGA queue
[2022/05/19 18:28:14] INFO: Initializing hash boards
[2022/05/19 18:28:14] INFO: chain[2] - Initializing
[2022/05/19 18:28:14] INFO: chain[1] - Initializing
[2022/05/19 18:28:14] INFO: chain[0] - Initializing
[2022/05/19 18:28:28] INFO: chain[2] - 30 chips detected
[2022/05/19 18:28:30] INFO: chain[1] - 30 chips detected
[2022/05/19 18:28:32] INFO: chain[0] - 30 chips detected
[2022/05/19 18:28:38] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 18:28:38] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:28:38] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:28:45] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:28:46] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:29:16] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:29:28] INFO: Switching to immersion fan control
[2022/05/19 18:29:28] INFO: Start mining!
[2022/05/19 18:29:56] INFO: Detected 256 Mb of RAM
[2022/05/19 18:29:56] INFO: Switching to immersion fan control
[2022/05/19 18:30:02] INFO: Power ON
[2022/05/19 18:30:04] INFO: Starting FPGA queue
[2022/05/19 18:30:04] INFO: Initializing hash boards
[2022/05/19 18:30:04] INFO: chain[2] - Initializing
[2022/05/19 18:30:04] INFO: chain[1] - Initializing
[2022/05/19 18:30:04] INFO: chain[0] - Initializing
[2022/05/19 18:30:18] INFO: chain[2] - 30 chips detected
[2022/05/19 18:30:20] INFO: chain[1] - 30 chips detected
[2022/05/19 18:30:22] INFO: chain[0] - 30 chips detected
[2022/05/19 18:30:28] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 18:30:28] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:30:28] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:30:36] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:31:06] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:31:18] INFO: Switching to immersion fan control
[2022/05/19 18:31:18] INFO: Start mining!
[2022/05/19 18:31:20] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:31:46] INFO: Detected 256 Mb of RAM
[2022/05/19 18:31:46] INFO: Switching to immersion fan control
[2022/05/19 18:31:52] INFO: Power ON
[2022/05/19 18:31:54] INFO: Starting FPGA queue
[2022/05/19 18:31:54] INFO: Initializing hash boards
[2022/05/19 18:31:54] INFO: chain[2] - Initializing
[2022/05/19 18:31:54] INFO: chain[1] - Initializing
[2022/05/19 18:31:54] INFO: chain[0] - Initializing
[2022/05/19 18:32:09] INFO: chain[2] - 30 chips detected
[2022/05/19 18:32:11] INFO: chain[1] - 30 chips detected
[2022/05/19 18:32:13] INFO: chain[0] - 30 chips detected
[2022/05/19 18:32:19] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 18:32:19] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:32:19] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:32:26] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:32:26] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:32:57] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:33:08] INFO: Switching to immersion fan control
[2022/05/19 18:33:08] INFO: Start mining!
[2022/05/19 18:33:37] INFO: Detected 256 Mb of RAM
[2022/05/19 18:33:37] INFO: Switching to immersion fan control
[2022/05/19 18:33:43] INFO: Power ON
[2022/05/19 18:33:45] INFO: Starting FPGA queue
[2022/05/19 18:33:45] INFO: Initializing hash boards
[2022/05/19 18:33:45] INFO: chain[2] - Initializing
[2022/05/19 18:33:45] INFO: chain[1] - Initializing
[2022/05/19 18:33:45] INFO: chain[0] - Initializing
[2022/05/19 18:33:59] INFO: chain[2] - 30 chips detected
[2022/05/19 18:34:01] INFO: chain[1] - 30 chips detected
[2022/05/19 18:34:03] INFO: chain[0] - 30 chips detected
[2022/05/19 18:34:09] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 18:34:09] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:34:09] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:34:16] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:34:16] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:34:47] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:34:50] ERROR: driver-btm-base.c:653 chain[0] sen[2] - Invalid temp reading, rem 0x81 0x73 loc 0x00 0x68
[2022/05/19 18:34:59] INFO: Switching to immersion fan control
[2022/05/19 18:34:59] INFO: Start mining!
[2022/05/19 18:35:27] INFO: Detected 256 Mb of RAM
[2022/05/19 18:35:27] INFO: Switching to immersion fan control
[2022/05/19 18:35:33] INFO: Power ON
[2022/05/19 18:35:35] INFO: Starting FPGA queue
[2022/05/19 18:35:35] INFO: Initializing hash boards
[2022/05/19 18:35:35] INFO: chain[2] - Initializing
[2022/05/19 18:35:35] INFO: chain[1] - Initializing
[2022/05/19 18:35:35] INFO: chain[0] - Initializing
[2022/05/19 18:35:49] INFO: chain[2] - 30 chips detected
[2022/05/19 18:35:50] INFO: chain[1] - 30 chips detected
[2022/05/19 18:35:52] INFO: chain[0] - 30 chips detected
[2022/05/19 18:35:58] INFO: Start-up temperature is 39 C (min -15 C)
[2022/05/19 18:35:58] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:35:58] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:36:05] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:36:06] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:36:36] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:36:48] INFO: Switching to immersion fan control
[2022/05/19 18:36:48] INFO: Start mining!
[2022/05/19 18:37:17] INFO: Detected 256 Mb of RAM
[2022/05/19 18:37:17] INFO: Switching to immersion fan control
[2022/05/19 18:37:23] INFO: Power ON
[2022/05/19 18:37:25] INFO: Starting FPGA queue
[2022/05/19 18:37:25] INFO: Initializing hash boards
[2022/05/19 18:37:25] INFO: chain[2] - Initializing
[2022/05/19 18:37:25] INFO: chain[1] - Initializing
[2022/05/19 18:37:25] INFO: chain[0] - Initializing
[2022/05/19 18:37:39] INFO: chain[2] - 30 chips detected
[2022/05/19 18:37:41] INFO: chain[1] - 30 chips detected
[2022/05/19 18:37:43] INFO: chain[0] - 30 chips detected
[2022/05/19 18:37:50] INFO: Start-up temperature is 39 C (min -15 C)
[2022/05/19 18:37:50] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:37:50] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:37:57] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:37:57] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:38:28] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:38:39] INFO: Switching to immersion fan control
[2022/05/19 18:38:39] INFO: Start mining!
[2022/05/19 18:39:07] INFO: Detected 256 Mb of RAM
[2022/05/19 18:39:07] INFO: Switching to immersion fan control
[2022/05/19 18:39:13] INFO: Power ON
[2022/05/19 18:39:16] INFO: Starting FPGA queue
[2022/05/19 18:39:16] INFO: Initializing hash boards
[2022/05/19 18:39:16] INFO: chain[2] - Initializing
[2022/05/19 18:39:16] INFO: chain[1] - Initializing
[2022/05/19 18:39:16] INFO: chain[0] - Initializing
[2022/05/19 18:39:30] INFO: chain[2] - 30 chips detected
[2022/05/19 18:39:32] INFO: chain[1] - 30 chips detected
[2022/05/19 18:39:34] INFO: chain[0] - 30 chips detected
[2022/05/19 18:39:40] INFO: Start-up temperature is 38 C (min -15 C)
[2022/05/19 18:39:40] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:39:40] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:40:18] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:40:29] INFO: Switching to immersion fan control
[2022/05/19 18:40:29] INFO: Start mining!
[2022/05/19 18:41:29] INFO: Changing voltage from 15500 to 15300 mV gradually
[2022/05/19 18:43:47] INFO: Changing voltage from 15300 to 15200 mV gradually
[2022/05/19 18:45:01] INFO: Changing voltage from 15200 to 15100 mV gradually
[2022/05/19 18:46:15] INFO: Changing voltage from 15100 to 15000 mV gradually
[2022/05/19 18:47:29] INFO: Changing voltage from 15000 to 14900 mV gradually
[2022/05/19 18:48:42] INFO: Changing voltage from 14900 to 14800 mV gradually
[2022/05/19 18:49:57] INFO: Changing voltage from 14800 to 14700 mV gradually
[2022/05/19 18:51:12] INFO: Changing voltage from 14700 to 14600 mV gradually
[2022/05/19 18:52:27] INFO: Changing voltage from 14600 to 14500 mV gradually
[2022/05/19 18:53:41] INFO: Shutting down the miner
[2022/05/19 18:53:41] INFO: Setting freq to 50 Mhz gradually
[2022/05/19 18:53:49] INFO: Stopping FPGA queue
[2022/05/19 18:53:49] INFO: chain[0] - Shutting down the chain
[2022/05/19 18:53:49] INFO: chain[1] - Shutting down the chain
[2022/05/19 18:53:50] INFO: chain[2] - Shutting down the chain
[2022/05/19 18:53:50] INFO: Power OFF
[2022/05/19 18:53:56] INFO: Power ON
[2022/05/19 18:53:58] INFO: Starting FPGA queue
[2022/05/19 18:53:58] INFO: Initializing hash boards
[2022/05/19 18:53:58] INFO: chain[2] - Initializing
[2022/05/19 18:53:58] INFO: chain[1] - Initializing
[2022/05/19 18:53:58] INFO: chain[0] - Initializing
[2022/05/19 18:54:11] INFO: chain[2] - 30 chips detected
[2022/05/19 18:54:12] INFO: chain[1] - 30 chips detected
[2022/05/19 18:54:14] INFO: chain[0] - 30 chips detected
[2022/05/19 18:54:20] INFO: Start-up temperature is 43 C (min -15 C)
[2022/05/19 18:54:20] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:54:20] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:54:27] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 18:54:27] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 18:54:58] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:55:09] INFO: Switching to immersion fan control
[2022/05/19 18:55:09] INFO: Start mining!
[2022/05/19 18:55:39] INFO: Detected 256 Mb of RAM
[2022/05/19 18:55:39] INFO: Switching to immersion fan control
[2022/05/19 18:55:45] INFO: Power ON
[2022/05/19 18:55:47] INFO: Starting FPGA queue
[2022/05/19 18:55:47] INFO: Initializing hash boards
[2022/05/19 18:55:47] INFO: chain[2] - Initializing
[2022/05/19 18:55:47] INFO: chain[1] - Initializing
[2022/05/19 18:55:47] INFO: chain[0] - Initializing
[2022/05/19 18:56:02] INFO: chain[2] - 30 chips detected
[2022/05/19 18:56:04] INFO: chain[1] - 30 chips detected
[2022/05/19 18:56:06] INFO: chain[0] - 30 chips detected
[2022/05/19 18:56:12] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 18:56:12] INFO: Switching to manual fan control (100 %)
[2022/05/19 18:56:12] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 18:56:50] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 18:57:01] INFO: Switching to immersion fan control
[2022/05/19 18:57:01] INFO: Start mining!
[2022/05/19 18:58:01] INFO: Changing voltage from 15500 to 15300 mV gradually
[2022/05/19 19:00:20] INFO: Changing voltage from 15300 to 15200 mV gradually
[2022/05/19 19:01:35] INFO: Changing voltage from 15200 to 15100 mV gradually
[2022/05/19 19:02:50] INFO: Changing voltage from 15100 to 15000 mV gradually
[2022/05/19 19:04:04] INFO: Changing voltage from 15000 to 14900 mV gradually
[2022/05/19 19:05:20] INFO: Changing voltage from 14900 to 14800 mV gradually
[2022/05/19 19:06:34] INFO: Changing voltage from 14800 to 14700 mV gradually
[2022/05/19 19:07:49] INFO: Changing voltage from 14700 to 14600 mV gradually
[2022/05/19 19:09:03] INFO: Changing voltage from 14600 to 14500 mV gradually
[2022/05/19 19:10:19] INFO: Shutting down the miner
[2022/05/19 19:10:19] INFO: Setting freq to 50 Mhz gradually
[2022/05/19 19:10:27] INFO: Stopping FPGA queue
[2022/05/19 19:10:27] INFO: chain[0] - Shutting down the chain
[2022/05/19 19:10:28] INFO: chain[1] - Shutting down the chain
[2022/05/19 19:10:28] INFO: chain[2] - Shutting down the chain
[2022/05/19 19:10:29] INFO: Power OFF
[2022/05/19 19:10:35] INFO: Power ON
[2022/05/19 19:10:37] INFO: Starting FPGA queue
[2022/05/19 19:10:37] INFO: Initializing hash boards
[2022/05/19 19:10:37] INFO: chain[2] - Initializing
[2022/05/19 19:10:37] INFO: chain[1] - Initializing
[2022/05/19 19:10:37] INFO: chain[0] - Initializing
[2022/05/19 19:10:50] INFO: chain[2] - 30 chips detected
[2022/05/19 19:10:51] INFO: chain[1] - 30 chips detected
[2022/05/19 19:10:52] INFO: chain[0] - 30 chips detected
[2022/05/19 19:10:58] INFO: Start-up temperature is 43 C (min -15 C)
[2022/05/19 19:10:58] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:10:58] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:11:06] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:11:06] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:11:36] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:11:48] INFO: Switching to immersion fan control
[2022/05/19 19:11:48] INFO: Start mining!
[2022/05/19 19:12:11] INFO: Detected 256 Mb of RAM
[2022/05/19 19:12:11] INFO: Switching to immersion fan control
[2022/05/19 19:12:17] INFO: Power ON
[2022/05/19 19:12:19] INFO: Starting FPGA queue
[2022/05/19 19:12:19] INFO: Initializing hash boards
[2022/05/19 19:12:19] INFO: chain[2] - Initializing
[2022/05/19 19:12:19] INFO: chain[1] - Initializing
[2022/05/19 19:12:19] INFO: chain[0] - Initializing
[2022/05/19 19:12:33] INFO: chain[2] - 30 chips detected
[2022/05/19 19:12:34] INFO: chain[1] - 30 chips detected
[2022/05/19 19:12:36] INFO: chain[0] - 30 chips detected
[2022/05/19 19:12:43] INFO: Start-up temperature is 42 C (min -15 C)
[2022/05/19 19:12:43] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:12:43] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:12:50] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:12:50] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:13:21] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:13:32] INFO: Switching to immersion fan control
[2022/05/19 19:13:32] INFO: Start mining!
[2022/05/19 19:14:02] INFO: Detected 256 Mb of RAM
[2022/05/19 19:14:02] INFO: Switching to immersion fan control
[2022/05/19 19:14:08] INFO: Power ON
[2022/05/19 19:14:10] INFO: Starting FPGA queue
[2022/05/19 19:14:10] INFO: Initializing hash boards
[2022/05/19 19:14:10] INFO: chain[2] - Initializing
[2022/05/19 19:14:10] INFO: chain[1] - Initializing
[2022/05/19 19:14:10] INFO: chain[0] - Initializing
[2022/05/19 19:14:24] INFO: chain[2] - 30 chips detected
[2022/05/19 19:14:26] INFO: chain[1] - 30 chips detected
[2022/05/19 19:14:28] INFO: chain[0] - 30 chips detected
[2022/05/19 19:14:34] INFO: Start-up temperature is 42 C (min -15 C)
[2022/05/19 19:14:34] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:14:34] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:14:41] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:14:41] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:15:12] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:15:24] INFO: Switching to immersion fan control
[2022/05/19 19:15:24] INFO: Start mining!
[2022/05/19 19:15:52] INFO: Detected 256 Mb of RAM
[2022/05/19 19:15:52] INFO: Switching to immersion fan control
[2022/05/19 19:15:58] INFO: Power ON
[2022/05/19 19:16:00] INFO: Starting FPGA queue
[2022/05/19 19:16:00] INFO: Initializing hash boards
[2022/05/19 19:16:00] INFO: chain[2] - Initializing
[2022/05/19 19:16:00] INFO: chain[1] - Initializing
[2022/05/19 19:16:00] INFO: chain[0] - Initializing
[2022/05/19 19:16:14] INFO: chain[2] - 30 chips detected
[2022/05/19 19:16:16] INFO: chain[1] - 30 chips detected
[2022/05/19 19:16:18] INFO: chain[0] - 30 chips detected
[2022/05/19 19:16:24] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 19:16:24] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:16:24] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:16:32] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:17:02] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:17:11] ERROR: src/temp.c:172 chain[0] sen[2] - Disabling faulty sensor, pcb=43 chip=-64
[2022/05/19 19:17:14] INFO: Switching to immersion fan control
[2022/05/19 19:17:14] INFO: Start mining!
[2022/05/19 19:17:42] INFO: Detected 256 Mb of RAM
[2022/05/19 19:17:42] INFO: Switching to immersion fan control
[2022/05/19 19:17:48] INFO: Power ON
[2022/05/19 19:17:50] INFO: Starting FPGA queue
[2022/05/19 19:17:50] INFO: Initializing hash boards
[2022/05/19 19:17:50] INFO: chain[2] - Initializing
[2022/05/19 19:17:50] INFO: chain[1] - Initializing
[2022/05/19 19:17:50] INFO: chain[0] - Initializing
[2022/05/19 19:18:04] INFO: chain[2] - 30 chips detected
[2022/05/19 19:18:06] INFO: chain[1] - 30 chips detected
[2022/05/19 19:18:08] INFO: chain[0] - 30 chips detected
[2022/05/19 19:18:15] INFO: Start-up temperature is 41 C (min -15 C)
[2022/05/19 19:18:15] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:18:15] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:18:22] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:18:22] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:18:52] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:19:04] INFO: Switching to immersion fan control
[2022/05/19 19:19:04] INFO: Start mining!
[2022/05/19 19:19:32] INFO: Detected 256 Mb of RAM
[2022/05/19 19:19:32] INFO: Switching to immersion fan control
[2022/05/19 19:19:38] INFO: Power ON
[2022/05/19 19:19:41] INFO: Starting FPGA queue
[2022/05/19 19:19:41] INFO: Initializing hash boards
[2022/05/19 19:19:41] INFO: chain[2] - Initializing
[2022/05/19 19:19:41] INFO: chain[1] - Initializing
[2022/05/19 19:19:41] INFO: chain[0] - Initializing
[2022/05/19 19:19:55] INFO: chain[2] - 30 chips detected
[2022/05/19 19:19:57] INFO: chain[1] - 30 chips detected
[2022/05/19 19:19:59] INFO: chain[0] - 30 chips detected
[2022/05/19 19:20:05] INFO: Start-up temperature is 40 C (min -15 C)
[2022/05/19 19:20:05] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:20:05] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:20:12] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec
[2022/05/19 19:20:12] ERROR: src/temp.c:217 chain[0] sen[3] - Lost, no updates for 10 sec
[2022/05/19 19:20:43] INFO: Raising freq from 50 to 600 Mhz gradually
[2022/05/19 19:20:54] INFO: Switching to immersion fan control
[2022/05/19 19:20:54] INFO: Start mining!
[2022/05/19 19:21:23] INFO: Detected 256 Mb of RAM
[2022/05/19 19:21:23] INFO: Switching to immersion fan control
[2022/05/19 19:21:29] INFO: Power ON
[2022/05/19 19:21:31] INFO: Starting FPGA queue
[2022/05/19 19:21:31] INFO: Initializing hash boards
[2022/05/19 19:21:31] INFO: chain[2] - Initializing
[2022/05/19 19:21:31] INFO: chain[1] - Initializing
[2022/05/19 19:21:31] INFO: chain[0] - Initializing
[2022/05/19 19:21:45] INFO: chain[2] - 30 chips detected
[2022/05/19 19:21:47] INFO: chain[1] - 30 chips detected
[2022/05/19 19:21:49] INFO: chain[0] - 30 chips detected
[2022/05/19 19:21:55] INFO: Start-up temperature is 39 C (min -15 C)
[2022/05/19 19:21:55] INFO: Switching to manual fan control (100 %)
[2022/05/19 19:21:55] INFO: Changing voltage from 17000 to 15500 mV gradually
[2022/05/19 19:22:02] ERROR: src/temp.c:217 chain[0] sen[2] - Lost, no updates for 10 sec https://imgur.com/aer1vHBplease let me know |
|
|
|
I'll try out different firmware and see what happens.
the initial tuning for each profile can take a while, but when it's done once, it's done for good How long exactly? I'm on ASIC.to and it's been tuning for almost 30 hours now. is that normal? |
|
|
|
I'll try out different firmware and see what happens.
Try Awseomeminer firmware it's vnish firmware with added features, using their version you get to use their monitoring software for free, which I think is very useful for your set up. What I would do is set a high profile, something 20% below the PSU's limit, and then use the monitoring software to play with the mining profile based on the temps, here an example. If max chip temp is < 85 ( keep 52th profile) if max chip is > 85 , ( change to 50th profile) if current profile is 50th and chip temp is >85 - (change to 48th profile) if mining uptime is > 2 hours and temp is below 75c and profile is 48th (change to 50th) These are some of the many things you can do with Awseomeminer firmware, you get also get it to send you emails or telegram notifications for when something happens, the initial tuning for each profile can take a while, but when it's done once, it's done for good and switching from one profile to another will take only a few seconds, this way you can run your miner at lower hashrate during noon when it's hot, and higher when it temps cool off a bit at night. Ha... at your own risk! I'm only giving you the info I observed in the past, and I didn't look into it further to get any definitive answers. I'd suggest doing your own experiment to verify what I saw. You can run stock firmware immersed if you have some fan spoofers. If you run stock in the same setup and the temps come out to be 10degC lower, then make your own conclusions...
The chips were designed to be run hot, the temperature delta to ambient is needed to move all that heat with air cooling. So you can actually run into some problems if you run too cold, timing on the ASIC design is very complicated and is temperature-dependent. So if they designed the chip for say 70degC to 90degC range, it may not meet timing requirements at 65degC for a given frequency and voltage.
I'm sure there's a sweet spot that would be below 80degC, but you'd need to experiment on that to find out. My point about the 80deg target on factory firmware is only that Bitmain seems to think that their chips are happy at that temperature.
Thank you both for helping me with this. It turns out it was true, Braiins exaggerates chip temperatures very much. From 78-80C with 1.5kw on Braiins to 60-66C with 1.4kw on ASIC.to. It is currently autotuning and things look promising. My conclusion is that immersed T17 does not do well on Braiins as it reaches 92C and autoshuts down when in fact it is within cool range. I would have tried Awesomefirmware as it does sound awesome, but I'm already half a day into tunning with ASIC.to. Thanks again. |
|
|
|
Ha... at your own risk! I'm only giving you the info I observed in the past, and I didn't look into it further to get any definitive answers. I'd suggest doing your own experiment to verify what I saw. You can run stock firmware immersed if you have some fan spoofers. If you run stock in the same setup and the temps come out to be 10degC lower, then make your own conclusions...
The chips were designed to be run hot, the temperature delta to ambient is needed to move all that heat with air cooling. So you can actually run into some problems if you run too cold, timing on the ASIC design is very complicated and is temperature-dependent. So if they designed the chip for say 70degC to 90degC range, it may not meet timing requirements at 65degC for a given frequency and voltage.
I'm sure there's a sweet spot that would be below 80degC, but you'd need to experiment on that to find out. My point about the 80deg target on factory firmware is only that Bitmain seems to think that their chips are happy at that temperature.
Got it, and I was glad when you said Braiins temp readings differ because that is what I have observed while I was playing with different firmware on my S9. I did some testing and was able to determine that Braiins reads chip temperature 5-6C higher than other fws. (It read 59 in asic.io and 65 in braiins) I'll try out different firmware and see what happens. |
|
|
|
|
