 Show Posts
|
|
Pages: [1]
|
For sale high-end server power supplies converted for use in mining. They're made by Delta Electronics and are designed to work 24/7. Voltage: 12V .Voltage can be set between 11V to about 14V maximum. Amps: 150A, but they can hold up to 200A of continue load without any harm (tested for 2 days of non stop work under 200A load, but I honestly do not know how long would they work under such load) PSUs come in different cable versions depending on your needs. I can sell them without any cables or with PCI-E plugs ready to work with GPUs or miners e.g. any Antminer. PSUs do not have factory fans, because they are supposed to be cooled be air flow from server, so I mount additional high-flow fans on them. Prices: PSU with switch and fans - 45 Euro PSU with 5x 50cm PCI-E 6pin plugs - 60 Euro PSU with 10x 50cm PCI-E 6pin plugs - 75 Euro Payment: BTCTC or COD, escrow. Shipment: Buyer covers shipment cost. I'm from Poland and that's from where the PSUs will be sent. Exact shipment cost will be confirmed with buyer. Sorry for my bad english, if you have any questions please PM me and I will try to answer:)   |
|
|
|
Do you have java x64 installed ?
yes I have. I reinstalled java and still same. |
|
|
|
guys, halp! Tried to use gpu plotter but have this error. [ERROR] [-61] Unable to create the OpenCL GPU generation buffer gpu plot generator 2.1.1, win 7 64, i5 3570k, hd 7950. MinGW and amd sdk installed. |
|
|
|
|
Any solution to huge amount of data being transfered by java.exe proccess? It's like 250mb per hour.
I think it's wallet server but I'm not really sure. Can I mine without my local wallet server constantly running?
|
|
|
|
WHY the f*** my miner downloaded almost 4GB today? Yesterday it was about 100MB. What is going on? All data usage is by proccess java.exe. I have 2TB of plots.
I know for most of you it's not a big deal, but I have limited data transfer...25GB per month.
mining is not for everyone I am mining for more then half a year and my miner was transfering like 10mb /day, not 4GB. WHY the f*** my miner downloaded almost 4GB today? Yesterday it was about 100MB. What is going on? All data usage is by proccess java.exe. I have 2TB of plots.
I know for most of you it's not a big deal, but I have limited data transfer...25GB per month.
Maybe an old client? What do you mean? |
|
|
|
|
WHY the f*** my miner downloaded almost 4GB today? Yesterday it was about 100MB. What is going on? All data usage is by proccess java.exe. I have 2TB of plots.
I know for most of you it's not a big deal, but I have limited data transfer...25GB per month.
|
|
|
|
why do miners use so much ram?? its so much it must be some bug.. if I use java -Xmx512m the miner have error so I need java -Xmx1024m but then 2 miner instances use 4-5Gb of ram in total?  WTF?? same here. It must be some kind of bug, no way it can use so much memory. |
|
|
|
Burst coins disappeared from wallet! Today morning I checked my localhost wallet to see how much i mined, and I was suprised by 0 burst account balance . Yesterday I had there not less the 2.5k burst. Welcome to your brand new account. You should fund it with some coins. And there is no transaction history like it's a brand new account. But I logged in with my old password. WTF? check the space you submitted in the field, they count as additional characters thanks but I'm embarrassed how stupid mistake I made... That's why I edited that post. I made a shortcut to the mine.bat file and it was the problem, there were missing files. When I start the run.bat directly everything is fine. |
|
|
|
oh what a nice error I have. Uncaught error from thread [default-akka.actor.default-dispatcher-19] shutting d
own JVM since 'akka.jvm-exit-on-fatal-error' is enabled for ActorSystem[default]
Uncaught error from thread [default-akka.actor.default-dispatcher-4] shutting do
wn JVM since 'akka.jvm-exit-on-fatal-error' is enabled for ActorSystem[default]
Uncaught error from thread [Uncaught error from thread [default-akka.actor.defau
lt-dispatcher-12default-akka.actor.default-dispatcher-6] shutting down JVM since
'akka.jvm-exit-on-fatal-error' is enabled for ActorSystem[default]
] shutting down JVM since 'akka.jvm-exit-on-fatal-error' is enabled for ActorSys
tem[default]
java.lang.OutOfMemoryError: Java heap space
at pocminer_pool.ScoopReader.readFile(ScoopReader.java:33)
at pocminer_pool.ScoopReader.onReceive(ScoopReader.java:18)
at akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.s
cala:167)
at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
at akka.actor.ActorCell.invoke(ActorCell.scala:487)
at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:238)
at akka.dispatch.Mailbox.run(Mailbox.scala:220)
at akka.dispatch.ForkJoinExecutorConfigurator$AkkaForkJoinTask.exec(Abst
ractDispatcher.scala:393)
at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
at scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool
.java:1339)[ERROR] [09/13/2014 02:49:51.422] [default-akka.actor.default-dispatc
her-19] [ActorSystem(default)] Uncaught error from thread [default-akka.actor.de
fault-dispatcher-19] shutting down JVM since 'akka.jvm-exit-on-fatal-error' is e
nabled
java.lang.OutOfMemoryError: Java heap space
at pocminer_pool.ScoopReader.readFile(ScoopReader.java:33)
at pocminer_pool.ScoopReader.onReceive(ScoopReader.java:18)
at akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.s
cala:167)
at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
at akka.actor.ActorCell.invoke(ActorCell.scala:487)
at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:238)
at akka.dispatch.Mailbox.run(Mailbox.scala:220)
at akka.dispatch.ForkJoinExecutorConfigurator$AkkaForkJoinTask.exec(Abst
ractDispatcher.scala:393)
at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
at scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool
.java:1339)
at scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:19
79)
at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThre
ad.java:107)
at scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:19
79)[ERROR] [09/13/2014 02:49:51.422] [default-akka.actor.default-dispatcher-12]
[ActorSystem(default)] Uncaught error from thread [default-akka.actor.default-di
spatcher-12] shutting down JVM since 'akka.jvm-exit-on-fatal-error' is enabled
java.lang.OutOfMemoryError: Java heap space
at pocminer_pool.ScoopReader.readFile(ScoopReader.java:33)
at pocminer_pool.ScoopReader.onReceive(ScoopReader.java:18)
at akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.s
cala:167)
at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
at akka.actor.ActorCell.invoke(ActorCell.scala:487)
at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:238)
at akka.dispatch.Mailbox.run(Mailbox.scala:220)
at akka.dispatch.ForkJoinExecutorConfigurator$AkkaForkJoinTask.exec(Abst
ractDispatcher.scala:393)
at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
at scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool
.java:1339)
at scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:19
79)
at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThre
ad.java:107)
at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThre
ad.java:107)[ERROR] [09/13/2014 02:49:51.422] [default-akka.actor.default-dispat
cher-4] [ActorSystem(default)] Uncaught error from thread [default-akka.actor.de
fault-dispatcher-4] shutting down JVM since 'akka.jvm-exit-on-fatal-error' is en
abled
java.lang.OutOfMemoryError: Java heap space
at pocminer_pool.ScoopReader.readFile(ScoopReader.java:33)
at pocminer_pool.ScoopReader.onReceive(ScoopReader.java:18)
at akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.s
cala:167)
at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
at akka.actor.ActorCell.invoke(ActorCell.scala:487)
at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:238)
at akka.dispatch.Mailbox.run(Mailbox.scala:220)
at akka.dispatch.ForkJoinExecutorConfigurator$AkkaForkJoinTask.exec(Abst
ractDispatcher.scala:393)
at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
at scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool
.java:1339)
at scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:19
79)
at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThre
ad.java:107)
java.lang.OutOfMemoryError: Java heap space
at pocminer_pool.ScoopReader.readFile(ScoopReader.java:33)
at pocminer_pool.ScoopReader.onReceive(ScoopReader.java:18)
[ERROR] [09/13/2014 02:49:51.422] [default-akka.actor.default-dispatcher-6] [Act
orSystem(default)] Uncaught error from thread [default-akka.actor.default-dispat
cher-6] shutting down JVM since 'akka.jvm-exit-on-fatal-error' is enabled
java.lang.OutOfMemoryError: Java heap space
at pocminer_pool.ScoopReader.readFile(ScoopReader.java:33)
at pocminer_pool.ScoopReader.onReceive(ScoopReader.java:18)
at akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.s
cala:167)
at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
at akka.actor.ActorCell.invoke(ActorCell.scala:487)
at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:238)
at akka.dispatch.Mailbox.run(Mailbox.scala:220)
at akka.dispatch.ForkJoinExecutorConfigurator$AkkaForkJoinTask.exec(Abst
ractDispatcher.scala:393)
at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
at scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool
.java:1339)
at scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:19
79)
at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThre
ad.java:107)
at akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.s
cala:167)
at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
at akka.actor.ActorCell.invoke(ActorCell.scala:487)
at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:238)
at akka.dispatch.Mailbox.run(Mailbox.scala:220)
at akka.dispatch.ForkJoinExecutorConfigurator$AkkaForkJoinTask.exec(Abst
ractDispatcher.scala:393)
at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
at scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool
.java:1339)
at scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:19
79)
at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThre
ad.java:107) Out of memory? Any solution? I have to miners running and they're using all my memory (4gb). Do i just need more ram or is there any other solution? |
|
|
|
|
Guys, I have a problem with mining. I'm running two mine.bat and the process java.exe is using all my RAM. I have 4GB of RAM. When I start the mining applications it uses about 3GB but after some time it uses all RAM and computer becomes SO SLOW that I literally cannot do anything, while CPU usage is about 10%.
I have 2x1TB of plots.
Any ideas? Do I just need more ram or is there a way to solve this?
I updated java but it's still same.
|
|
|
|
OK so the gpu ploter works fine, but it's kinda slow  My best result is about 1200 n/m on a single Radeon 7950. My config: /gpuPlotGenerator generate 0 0 /plots <number> 6400000 700000 128 16 8160
pause any ideas how to improve? I think you may increase <threadsNumber> to 64 I tried with 64 threads but it slows down, it's faster with 16 threads. So it still takes about 2 days to plot 1TB. Is there a way to make a single plot with 2 video cards? Or just 1 plot per card. |
|
|
|
OK so the gpu ploter works fine, but it's kinda slow My best result is about 1200 n/m on a single Radeon 7950. My config: /gpuPlotGenerator generate 0 0 /plots <number> 6400000 700000 128 16 8160
pause any ideas how to improve? |
|
|
|
GPU plot generator v1.1.0
Author: Cryo
Bitcoin: 138gMBhCrNkbaiTCmUhP9HLU9xwn5QKZgD
Burst: BURST-YA29-QCEW-QXC3-BKXDL
--------------
Path: /plots
Nonces: 4092000 to 4132960 (10 GB)
Process memory: 1024MB
Threads number: 128
--------------
Retrieving OpenCL platform
Retrieving OpenCL GPU device
Creating OpenCL context
An OpenCL error occured in the generation process, aborting...
>>> [-33] Unable to create the OpenCL context oh look, new error  |
|
|
|
hey guys, I tried the GPU plotter but GPU driver crashes every time it starts plotting second thing, I've noticed kinda big amount of data being transfered while plotting/mining burst. It can download even about 500MB per day, while mining other coins it was about 10MB/day. It might put me out from burst train to the moon, because I have limited data transfer:( Does it download data only while plotting or while mining? Try with different version of catalyst software. There are still different version of gpu to be tested but my mate successfully plotting with 290x twin frozer x10 times faster than his i7 processor. If you gpu is same model, pm for specs  I tried on 2x 7950 and the driver was crashing. Then I tried on another pc with single 7950 and it doesn't even start to plot, it crashes after 'Building OpenCL program'. what catalyst version does your mate have? I'm pretty sure I have the newest drivers. Supposedly they are on 13.9. I just did a clean uninstall and installing 13.9 on a HD7970. Yes my mate is on 13.9, i told him to download this version as it was mentioned here before and it worked straight on his 290x but he said on same pc it didnt work on 280x, so hope driver is an issue. You can try installing different version and see if one works for you. I tried 13.9 + AMD SKD and exactly same happens. |
|
|
|
hey guys, I tried the GPU plotter but GPU driver crashes every time it starts plotting second thing, I've noticed kinda big amount of data being transfered while plotting/mining burst. It can download even about 500MB per day, while mining other coins it was about 10MB/day. It might put me out from burst train to the moon, because I have limited data transfer:( Does it download data only while plotting or while mining? Try with different version of catalyst software. There are still different version of gpu to be tested but my mate successfully plotting with 290x twin frozer x10 times faster than his i7 processor. If you gpu is same model, pm for specs I tried on 2x 7950 and the driver was crashing. Then I tried on another pc with single 7950 and it doesn't even start to plot, it crashes after 'Building OpenCL program'. what catalyst version does your mate have? I'm pretty sure I have the newest drivers. |
|
|
|
hey guys, I tried the GPU plotter but GPU driver crashes every time it starts plotting second thing, I've noticed kinda big amount of data being transfered while plotting/mining burst. It can download even about 500MB per day, while mining other coins it was about 10MB/day. It might put me out from burst train to the moon, because I have limited data transfer:( Does it download data only while plotting or while mining? |
|
|
|
Don't know how high can I go with TC? Tried a random 35400 but it ended with a BSOD. With TC=29400 hashing speed decreased to about 200 kh/s per card and there are still as many HWs. I was getting many HWs even with the video cards on stock settings and with a blank config file. with 2 gpu threads, intensity 18, and TC 21000 (I can't set it lower because vertminer says I need to decrease TC or increase LG) I'm having 220 kh/s per card and a little less HWs. No matter what I do, I'm still having HWs and not more than 280 kh/s, help |
|
|
|
hey guys, I'm running two 7950s (one is MSI and the other is Club3d). Getting about 280 kh/s per card and but I'm getting many HWs. Here's my config file, it based on what I found in this topic and edited. ,
"intensity" : "20",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "22400",
"shaders" : "1792",
"gpu-engine" : "1150",
"gpu-memclock" : "1400",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.140",
"api-mcast-port" : "4028",
"api-port" : "4028",
"no-submit-stale" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
I saw there were some 7950s running more then 300 kh/s, I'm so far from that result ;/ What would you suggest? thanks:) |
|
|
|
|
