 Show Posts
|
|
Pages: [1]
|
Miner update? Did i miss something?
Well, not that recent.. refering to the 2-02-2014 update |
|
|
|
Hem.. Mine only ogt 6.5 pick with this. Any idead of whats wrong?(I have a case with bad airflow, so I controled the temp at 76. Maybe that is the reason?)
I allow 95 deg C temps. I have a case of bad airflow too...  Christian Sir, when I say bad airflow, I mean one fan of the 780 is nearly covered by cables.. Nice work on the recent miner update though, hope to see another of you wonderful work soon!  |
|
|
|
Hem.. Mine only ogt 6.5 pick with this. Any idead of whats wrong?(I have a case with bad airflow, so I controled the temp at 76. Maybe that is the reason?)
that may be why, as nvidia cards overclock themselves till they hit the thermal limit so limiting it down would limit the hashrate aswell. but i think the thermal limit of my 780 is only at 80'C. then again it is a watercooled card so may have had a lower limit then normal cards? Thanks, I overclocked at +135.. maybe its a litte too much? just had servel freeze and I had to force shut down. |
|
|
|
Does anyone know a YAC config for gtx 780 classified? Using t9x21 overclocked at +100 core clock right now and getting 4.4-5.5 khs.
cudaminer.exe -s 10 --algo=scrypt-jane:YAC -i 0 -C 2 -b 8192 -L 6 -l t12x32 -m 1 -o stratum+tcp://yac.coinmine.pl:9088 -u ivanlabrie.1 -p x 7.5kh/s Hem.. Mine only ogt 6.5 pick with this. Any idead of whats wrong?(I have a case with bad airflow, so I controled the temp at 76. Maybe that is the reason?) |
|
|
|
|
Does anyone know a YAC config for gtx 780 classified? Using t9x21 overclocked at +100 core clock right now and getting 4.4-5.5 khs.
|
|
|
|
You wont always have all shares accepted. 95% isnt too bad
Thanks |
|
|
|
My gtx 780 classy overclocked at +135 mhz and 95% power kept on getting only 95% share accepted.. Is this normal? It started off with 100% accepted...
What are you mining? Altcoin in Multipool |
|
|
|
|
My gtx 780 classy overclocked at +135 mhz and 95% power kept on getting only 95% share accepted.. Is this normal? It started off with 100% accepted...
|
|
|
|
|
Just another question... Can someone explain those crazy 290 khs i5 shown in the main page?
|
|
|
|
|
I have a gtx780 going 5.5 khs with t9x21, is that good enough? Also, the 0.55 khs is normal on the fx 8350?
|
|
|
|
|
I know this is a old post.. But my fx 8350 is only doing 0.55 khs,
Which according to this list http://[Suspicious link removed]/index.php/Mining_Hardware_Comparison is completely normal but is way off the 290 khs listed in this post. Can anyone tell me how to improve my speed? Thanks!
|
|
|
|
|
I'm getting the 0xc000007b error whenwever I tried to open cudaminer. Any idead of how to solve that?
|
|
|
|
|
I recently started trying to mine memory Coin. I tried using the following command in cudaminer:
.\cudaminer-2014-02-28\x64\cudaminer.exe -s 10 --algo=scrypt-jane:Coin -L 20 -R 5 --time-limit 28800 -d 0 -i 0 -l t12x24 -C 0 -m 1 -H 2 -o stratum+tcp://work.mmcpool.com:8880 -O MAAtZGWZ3aT4SgvEt4Qps2WP92qStyKG2G:x
However, When I tried to run it, it give me the JSON decode failed(1): '[' or '{' expected near '<' error. Any idea of what i did wrong?
P.S. this is my first post, please point out anything i did wrong.
|
|
|
|
Does anyone have a usable batch file for gtx 780 classy mining memory coin? Just can't get mine to work...
There are 500+ pages of good advice... unless you are more precise in what you intend to do, we can't help you... Sorry, but can you tell me what information you need? I'm new to this.. at least what you want to mine, the configuration varies depending on what you run. (there is also a readme file which might help) I use Z12x24 to mine at 1gh.com for memory coin. The gtx 780 was overclocked +135 MHz. I use algo=scrypt jane , no CPU parallel. This is all I can remember at the moment, I'll check later. what is the Nfactor ? (it should be displayed when you start cudaminer). What you can do, it to run the autotune, it works rather well with scrypt-jane. If the Nfactor is large, it could also helpful to increase large lookup gap value (-L) Thank you!forgot to mention, the error cudaminer gave me was "json decode fail(1):"[" or "{" expected near "<" |
|
|
|
Does anyone have a usable batch file for gtx 780 classy mining memory coin? Just can't get mine to work...
There are 500+ pages of good advice... unless you are more precise in what you intend to do, we can't help you... Sorry, but can you tell me what information you need? I'm new to this.. at least what you want to mine, the configuration varies depending on what you run. (there is also a readme file which might help) I use Z12x24 to mine at 1gh.com for memory coin. The gtx 780 was overclocked +135 MHz. I use algo=scrypt jane , no CPU parallel. This is all I can remember at the moment, I'll check later. |
|
|
|
Does anyone have a usable batch file for gtx 780 classy mining memory coin? Just can't get mine to work...
There are 500+ pages of good advice... unless you are more precise in what you intend to do, we can't help you... Sorry, but can you tell me what information you need? I'm new to this.. |
|
|
|
|
Does anyone have a usable batch file for gtx 780 classy mining memory coin? Just can't get mine to work...
|
|
|
|
|
