|
Is any dispensaries accept this coin?
If not, ways they big deal
|
|
|
|
|
Can anyone let me know what dispensaries accept CannabisCoin for payments?
How exactly are payments made without a mobile wallet?
What is the latest CannabisCoin mining pool?
THANKS
|
|
|
|
Could it be some accounts compromised?  Cloak 2014-08-03 16:13:29 SELL 0.00161119 11196.85648015 18.04026319 MYC 2014-08-03 16:14:03 BUY 0.00000120 60387626.50833333 72.46515181 Cloak Sold 114.7 BTC MYC Bought 110.5 BTC Be careful, guys! If this was a mintpal hack again... it will be the death of it! That's too many times. Someone got probably hacked, the hacker bought his own MYC with the victim's BTC because he couldn't access the victim's email. That's what I think. make sense. 1. hack account 2. see all that juicy BTC, but with no email, ou can't withdrawal 3.fire up own account 4. use own account, buy a ton of shit scam coin. 5. set high sell order for you shit coin, equal in BTC to amount in hacked account 6. log back into hacked account, buy the scam coin using the btc in hacked account. 7. hacked account is left with scam shit coin 8. your own account is stocked with over 100 BTC. 9. withdrawal 100 BTC 10. Hookers and Blow successful hack is extremely successful. Is this what happened? Can anyone give me a detailed summary of exactly what happened? |
|
|
|
|
Snuckles forget scrypt, seriously just forget it for profits.
You need to be mining x11/x13 coins right now. Download BAMT, a very easy mining OS that will have the drivers for your cards already installed and all the mining programs that willl you need. Once you open bamt you should configure your pools to run on trademybit.com for the best profits because they auto switch between the most profitable x11/x13 coins and you can eitheir keep those coins, or let them auto trade them into BTC for you.
Also, I mine a lot on Dedicated Pools, they have the newest x11/x13 coins at launch, and very often these are profitable to mine.
So yea, forget scrypt coins like dogecoin or litecoin, thats a waste right now.
|
|
|
|
|
Obviously the best place to mine this coin is:
DEDICATED POOLS!!!!
|
|
|
|
|
KeyserSozeMC is a selective scammer, do not trust this guy! He will burn you on large amounts, he uses small amounts to build trust and then scams! He has multiple accounts and shills, bad person.
|
|
|
|
|
I see a ridiculous amount of gambling sites advertised on this forum. I do not trust any of them honestly, and I cant spend hours weeding through them to find a legit one and then get burned.
So what I'm looking for is personal experiences with a site, I am specifically looking for sports book betting. I want a site that has fast deposits and fast withdrawals with no limits on minimum or at least reasonable. I would hate to deposit half a bitcoin and then learn that i need a complete bitcoin to withdraw, that's a scam in my opinion.
WHAT I am NOT LOOKING FOR, are more advertisements like i just looked at, I only want personal experiences and I would be willing tip a bit for some good advice. Thanks guys!
|
|
|
|
|
Hi I've been having a problem with my Mintcoin wallet-qt, I have looked all over for any help, and other than downloading a new wallet and importing my wallet.dat into is all I find. If you are one of those lame ducks that want to comment "Google is your friend" then please keep that to yourself.
So, I have been using Mintcoin qt on my Ubuntu machine for a few weeks. My other wallets work fine (blackcoin, pinkcoin, and electrum) and my Mintcoin wallet WAS working.
I am having a problem with the wallet opening, it shows the green loading screen with the Mintcoin logo on it, but it gets stuck "Loading block index"
I'm not very linux knowledged, so any help world be appreciated. I had a tough time just figuring out how to install the dang wallet.
Also I'm having difficulty finding the wallet.dat so I can backup. I know the wallet qt has a backup feature, but I need to know where the wallet.dat is stored in case I need to import my existing wallet.dat into a newly downloaded qt.
Thanks, help is much appreciated!
|
|
|
|
|
Hello, I have been using Mintcoin qt on my Ubuntu machine for a few weeks. I am having a problem with the wallet opening, it shows the green loading screen with the Mintcoin logo on it, but it gets stuck "Loading block index"
I'm not very linux knowledged, so any help world be appreciated. I had a tough time just figuring out how to install the dang wallet.
Also I'm having difficulty finding the wallet.dat so I can backup. I know the wallet qt has a backup feature, but I need to know where the wallet.dat is stored in case I need to import my existing wallet.dat into a newly downloaded qt.
Thanks, hep is much appreciated!
|
|
|
|
|
I think anyone buying this coin is a straight moron, stay the f away from this garbage.
And Bittrex is letting all theses scams and garbage coins loose, shame on them
|
|
|
|
|
Why did everyone migrate to Dedicated Pools after they screwed up the launch? SuchPools was working fine and had the most hashrate, but i figured that in a few hours everyone would migrate back to dedicated.
|
|
|
|
All this Chinese scammer is doing is providing a sales pitch , he will cash in when is got is thousands of btc:
•Leading you to believe you can profit from Uro with no backing proof or evidence there is any company backing it up
•Claiming to know unique market trends and to know that URO will replace BTC
•Promising quick, large and guaranteed returns.
•is using several people to hype URO so newbie buyers can buy URO at inflate prices.
•They have apparently set up a channel to lure in newbie investors and anyone on that channel who ask any negative question get banned and kicked. While they keep telling people that URO will make them millionaires
• IS claiming misleading statements and outlandish future projections to entice to buy this scam coin
• There are actually selling URO they bought before the rise in price they created with this fake PR stunt
Who wants to make this Bouan character a millionaire ?
Who wants to fall for his Pump and dump schemes?
Who wants to become this manipulators sheep in order to make him rich?
URO is here to make money off of your gullibility
Buan and his associate are getting paid to promote URO (UNO?), they created pure hype with this fake UREA deal which has never occurred.
There was never a deal made with any companies its pure fakery , they used that to lure you into investing in URO
The pump has stopped, the price has already collapses 3 floors down, the chart does not lie. You have been warned.
Your entire Bitcointalk posts have all been FUD. I dont think anyone is going to listen to you, even if you have some good bullet points. What I really am interested in knowing is: If you are a a troll FUDDER, why do you this? Why spend the entire day (which is evidenced by the timestamps on your posts) fudding URO? What do you get out of it? It's just too obvious that you are trying so hard to scare people about this coin, but really nobody cares if its a scam if they can make money off it. Please answer my questions, ill pay you! you really suck. this man is most intelligent one i find in this crack of dog shit. others are either scammer associates or retards. AND GUESS WHAT FOLKS....this moron's WHOLE ACCOUNT is just posts of FUD. And that's all..... |
|
|
|
All this Chinese scammer is doing is providing a sales pitch , he will cash in when is got is thousands of btc:
•Leading you to believe you can profit from Uro with no backing proof or evidence there is any company backing it up
•Claiming to know unique market trends and to know that URO will replace BTC
•Promising quick, large and guaranteed returns.
•is using several people to hype URO so newbie buyers can buy URO at inflate prices.
•They have apparently set up a channel to lure in newbie investors and anyone on that channel who ask any negative question get banned and kicked. While they keep telling people that URO will make them millionaires
• IS claiming misleading statements and outlandish future projections to entice to buy this scam coin
• There are actually selling URO they bought before the rise in price they created with this fake PR stunt
Who wants to make this Bouan character a millionaire ?
Who wants to fall for his Pump and dump schemes?
Who wants to become this manipulators sheep in order to make him rich?
URO is here to make money off of your gullibility
Buan and his associate are getting paid to promote URO (UNO?), they created pure hype with this fake UREA deal which has never occurred.
There was never a deal made with any companies its pure fakery , they used that to lure you into investing in URO
The pump has stopped, the price has already collapses 3 floors down, the chart does not lie. You have been warned.
Your entire Bitcointalk posts have all been FUD. I dont think anyone is going to listen to you, even if you have some good bullet points. What I really am interested in knowing is: If you are a a troll FUDDER, why do you this? Why spend the entire day (which is evidenced by the timestamps on your posts) fudding URO? What do you get out of it? It's just too obvious that you are trying so hard to scare people about this coin, but really nobody cares if its a scam if they can make money off it. Please answer my questions, ill pay you! |
|
|
|
|
This thread is a sad sad excuse for a forum. You idiots rant and rave about scams, about people doing videos. None of you have any clue if this is safe or scam, just be rational...its simple. So instead of being able to read an intelligent discussion I have to sort through this garbage:
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
he is either a paid troll, or IconicExpert himself. why else would he spend this much time, saying the same thing over and over again. It becomes quite clear that people have ulterior agendas when they act like this...
and
yes. i am paid troll.
would you plz buy more URO? ALL IN if possible. let's meet in one week in this same thread. and find out who is crying.
and
stupid fucking memes of whales and time magazine covers
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
so after clicking through the last ten pages I realize that there was one intelligent comment in that amount of time that I wasted........you people need to get a life. YOU ARE NOT AFFECTING ANYTHING BY INSULTING AND MAKING UP CONSPIRACIES! You are just wasting your time, like me with this comment. Hopefully one of you morons reads this and decides to stop filling up this forum with your incessant scam or not trash.
|
|
|
|
|
Why would anyone use this coin to make their UREA transactions and not use an established coin like Bitcoin?
I think this is just a well orchestrated scam....a lot of people could have made money, and i wish i had bought in last week......but i think alot of people are going to lose hard when this coin drops.
|
|
|
|
|
Why is there a 45 Ghs network hashrate and dedicated pool only has 10 of that? there is only two other pools listed and they dont even have any miners? wtf
|
|
|
|
|
Hi everyone, I have been trying to get my Sgminer5.0 to mine X15 for the past few days. I'm having problems with the config file, evey config i try gives me no connection to the pool, or HW errors with invalid nonce count, or if i use the examply config that came with the miner the issue is low difficulty shares being rejected. I am using BAMT with SGMINER 5.0 and its the only way I can mine x15, if anyone has a config file i can try please I will pay for you help.
Below is the example.conf that came with the miner, it gives me rejected low difficulty shares when i try it and if i switch it with bitblock kernel or if i try to change anything on it i get invalid nonce count and HW errors. PLEASE HELP ME!
{
"pools": [
{
"name":"Testpool X11",
"url": "stratum+tcp://url1:4440",
"user": "user",
"pass": "x",
"priority": "1",
"profile": "x11"
},
{
"name":"Testpool Scrypt",
"url": "stratum+tcp://url2:3339",
"user": "user",
"pass": "x",
"priority": "2",
"profile": "scrypt"
},
{
"name":"Testpool X11 with other profile",
"url": "stratum+tcp://url3:4440",
"user": "user",
"pass": "x",
"priority": "0",
"profile": "x11test"
},
{
"name":"Testpool Using default profile",
"url": "stratum+tcp://url4:3333",
"user": "user",
"pass": "x"
}
],
"profiles": [
{
"name": "x11",
"algorithm": "darkcoin-mod",
"intensity": "19",
"thread-concurrency": "10696,8192",
"worksize": "128",
"gpu-engine": "1100",
"gpu-threads": "2",
"gpu-fan": "75"
},
{
"name": "scrypt",
"algorithm": "ckolivas",
"lookup-gap": "2",
"intensity": "19,13",
"thread-concurrency": "19656,8192",
"worksize": "256",
"gpu-engine": "1000,1065",
"gpu-memclock": "1500",
"gpu-threads": "1,2",
"gpu-fan": "85",
"gpu-powertune": "20"
},
{
"name": "x11test",
"algorithm": "darkcoin-mod",
"device": "1",
"intensity": "19",
"thread-concurrency": "10696,8192",
"worksize": "512",
"gpu-engine": "1100",
"gpu-threads": "2",
"gpu-fan": "75"
}
],
"failover-only": true,
"default-profile": "scrypt",
"temp-cutoff": "95,95",
"temp-overheat": "90,90",
"temp-target": "80,80",
"gpu-memdiff": "0,0",
"shares": "0",
"kernel-path": "/usr/local/bin",
"api-allow": "W:127.0.0.1",
"api-listen": true,
"api-mcast-port": "4028",
"api-port": "4028",
"expiry": "1",
"failover-switch-delay": "60",
"gpu-dyninterval": "7",
"gpu-platform": "-1",
"hamsi-expand-big": "4",
"log": "5",
"no-pool-disable": true,
"no-client-reconnect": true,
"queue": "0",
"scan-time": "1",
"tcp-keepalive": "30",
"temp-hysteresis": "3"
}
|
|
|
|
|
Hi everyone, I have been trying to get my Sgminer5.0 to mine X15 for the past few days. I'm having problems with the config file, evey config i try gives me no connection to the pool, or HW errors with invalid noncecount, also the other issue is low difficulty shares being rejected. I am using BAMT with SGMINER 5.0 and its the only way I can mine x15, if anyone has a config file i can try please I will pay for you help.
I'm using the bitblock kernel and this config to just try to get the x11 to work, but it still comes with low difficulty shares. Anytime i try another config with bitblock kernel or if i try to change this config i get invalid nonce count and HW errors. PLEASE HELP ME!
{
"pools": [
{
"name":"Testpool X11",
"url": "stratum+tcp://url1:4440",
"user": "user",
"pass": "x",
"priority": "1",
"profile": "x11"
},
{
"name":"Testpool Scrypt",
"url": "stratum+tcp://url2:3339",
"user": "user",
"pass": "x",
"priority": "2",
"profile": "scrypt"
},
{
"name":"Testpool X11 with other profile",
"url": "stratum+tcp://url3:4440",
"user": "user",
"pass": "x",
"priority": "0",
"profile": "x11test"
},
{
"name":"Testpool Using default profile",
"url": "stratum+tcp://url4:3333",
"user": "user",
"pass": "x"
}
],
"profiles": [
{
"name": "x11",
"algorithm": "darkcoin-mod",
"intensity": "19",
"thread-concurrency": "10696,8192",
"worksize": "128",
"gpu-engine": "1100",
"gpu-threads": "2",
"gpu-fan": "75"
},
{
"name": "scrypt",
"algorithm": "ckolivas",
"lookup-gap": "2",
"intensity": "19,13",
"thread-concurrency": "19656,8192",
"worksize": "256",
"gpu-engine": "1000,1065",
"gpu-memclock": "1500",
"gpu-threads": "1,2",
"gpu-fan": "85",
"gpu-powertune": "20"
},
{
"name": "x11test",
"algorithm": "darkcoin-mod",
"device": "1",
"intensity": "19",
"thread-concurrency": "10696,8192",
"worksize": "512",
"gpu-engine": "1100",
"gpu-threads": "2",
"gpu-fan": "75"
}
],
"failover-only": true,
"default-profile": "scrypt",
"temp-cutoff": "95,95",
"temp-overheat": "90,90",
"temp-target": "80,80",
"gpu-memdiff": "0,0",
"shares": "0",
"kernel-path": "/usr/local/bin",
"api-allow": "W:127.0.0.1",
"api-listen": true,
"api-mcast-port": "4028",
"api-port": "4028",
"expiry": "1",
"failover-switch-delay": "60",
"gpu-dyninterval": "7",
"gpu-platform": "-1",
"hamsi-expand-big": "4",
"log": "5",
"no-pool-disable": true,
"no-client-reconnect": true,
"queue": "0",
"scan-time": "1",
"tcp-keepalive": "30",
"temp-hysteresis": "3"
}
|
|
|
|
|
Hi everyone, I have been trying to get my Sgminer5.0 to mine X15 for the past few days. I'm having problems with the config file, evey config i try gives me no connection to the pool, or HW errors with invalid noncecount, also the other issue is low difficulty shares being rejected. I am using BAMT with SGMINER 5.0 and its the only way I can mine x15, if anyone has a config file i can try please I will pay for you help.
I'm using the bitblock kernel and this config to just try to get the x11 to work, but it still comes with low difficulty shares. Anytime i try another config with bitblock kernel or if i try to change this config i get invalid nonce count and HW errors. PLEASE HELP ME!
{
"pools": [
{
"name":"Testpool X11",
"url": "stratum+tcp://url1:4440",
"user": "user",
"pass": "x",
"priority": "1",
"profile": "x11"
},
{
"name":"Testpool Scrypt",
"url": "stratum+tcp://url2:3339",
"user": "user",
"pass": "x",
"priority": "2",
"profile": "scrypt"
},
{
"name":"Testpool X11 with other profile",
"url": "stratum+tcp://url3:4440",
"user": "user",
"pass": "x",
"priority": "0",
"profile": "x11test"
},
{
"name":"Testpool Using default profile",
"url": "stratum+tcp://url4:3333",
"user": "user",
"pass": "x"
}
],
"profiles": [
{
"name": "x11",
"algorithm": "darkcoin-mod",
"intensity": "19",
"thread-concurrency": "10696,8192",
"worksize": "128",
"gpu-engine": "1100",
"gpu-threads": "2",
"gpu-fan": "75"
},
{
"name": "scrypt",
"algorithm": "ckolivas",
"lookup-gap": "2",
"intensity": "19,13",
"thread-concurrency": "19656,8192",
"worksize": "256",
"gpu-engine": "1000,1065",
"gpu-memclock": "1500",
"gpu-threads": "1,2",
"gpu-fan": "85",
"gpu-powertune": "20"
},
{
"name": "x11test",
"algorithm": "darkcoin-mod",
"device": "1",
"intensity": "19",
"thread-concurrency": "10696,8192",
"worksize": "512",
"gpu-engine": "1100",
"gpu-threads": "2",
"gpu-fan": "75"
}
],
"failover-only": true,
"default-profile": "scrypt",
"temp-cutoff": "95,95",
"temp-overheat": "90,90",
"temp-target": "80,80",
"gpu-memdiff": "0,0",
"shares": "0",
"kernel-path": "/usr/local/bin",
"api-allow": "W:127.0.0.1",
"api-listen": true,
"api-mcast-port": "4028",
"api-port": "4028",
"expiry": "1",
"failover-switch-delay": "60",
"gpu-dyninterval": "7",
"gpu-platform": "-1",
"hamsi-expand-big": "4",
"log": "5",
"no-pool-disable": true,
"no-client-reconnect": true,
"queue": "0",
"scan-time": "1",
"tcp-keepalive": "30",
"temp-hysteresis": "3"
}
|
|
|
|
|
Show Posts
