 Show Posts
|
|
Pages: [1] 2 3 »
|
1.16.3 didn't work well, when crashed didn't show which GPU cause it.
1.16.2 is working OK.
Please run the miner with "--log-file rigel.log" and post the log file, I'll have a look. |
|
|
|
|
Rigel 1.15.0
* (IRON) Add "fishhash" algorithm support (dev fee 1%) including
* IRON+ALPH, IRON+KLS, IRON+PYI, IRON+RXD, +ZIL, see bat/sh scripts
* Add SOCKS5 proxy support (see "--proxy" for more info)
* Add "--no-colour" parameter to disable colours in the miner log
* Allow opting out of memory clock reset when building DAG by passing "--dag-reset-mclock off"
Bug fixes:
* (ALPH) Password field value "-p" is not passed to the pool making it impossible to use static difficulty when mining to Vipor.
|
|
|
|
With absolute the same settings as before, I got this error:
This is just a warning, the miner is trying to set zero memory offset to avoid DAG corruption and fails because it lacks admin privileges, you can ignore it. Also pool hashrate is too small, even acceptes shares is small too (26 accepted shares after 7 minutes of mining), compairing to Gminer wich does 41 accepted shares after same 7 minutes of mining;
So?
26 or 41 shares are very small numbers, you need to find thousands to get a good estimate of how well the miner is performing, see https://github.com/Kerney666/trm-ethash-miner-tester#mining-as-a-poisson-process |
|
|
|
Hi!
I tried today to use Rigel Miner 1.13.0 because lower fee rates vs G-Miner 3.43.
I used to mine Kawpow (Ravencoin) into Nicehash website + ZIL into Ezil site.
...
Any thoughts?
From 1.13.0 onwards "-a kawpow+zil" is preferred over "-a ravencoin+zil". The rejected share issue when mining to Nicehash is a known problem and will be fixed in the next release. |
|
|
|
|
Rigel 1.10.1
* Add support for Volta architecture (Titan V)
* Add CFX+KLS and CFX+KLS+ZIL mining support (see `dual-cfx-kls` bat/sh script)
Bug fixes:
* (KLS) `Unexpected EOF` error when mining to Mining Rig Rentals
|
|
|
|
Great miner, I like the interface a lot better than the others!
I was trying to figure out how to "dual" (not really dual?) mine KLS to two addresses (one solo and one not solo,) but -a karlsenhash+karlsenhash and two addresses didn't work. Is there a way to do that? (Same alg but split effort to two addresses.)
Thanks! Currently there's no way to split your hashrate the way you requested. Assuming you have multiple GPUs, your best bet would be running two instances of the miner on different GPUs and directing them to different addresses. |
|
|
|
|
Rigel 1.10.0
* (KLS) Add `karlsenhash` algorithm (dev fee 1%), including
* RTH+KLS, ERG+KLS, ETC+KLS, +ZIL, see bat/sh scripts
* (KAS) Remove `kheavyhash` algorithm
|
|
|
|
Hi! SOCKS5 proxy is not supported?
Hi. Not yet. |
|
|
|
|
Rigel 1.9.2
* Add PowBlocks mining support (`-a powblocks`)
* Remove `flora` algorithm
Bug fixes:
* (Windows 7) TUI is broken
|
|
|
|
Hi, since 1.9.0 version, including 1.9.1 too, it started to appear more rejected shares on ZIL coin in dual or single mining, more than 10-15% are rejected shares regarding older versions, where rejected shares of ZIL, was lighter 2-3%.
Can you check?
Thank you!
I did not reply sooner on purpose - was trying to see if anyone else was having the same issue. Your report is the only one I've received, so I'm guessing it must be something on your end, or probably a temporary pool issue. Likely not a Rigel bug. |
|
|
|
|
Rigel 1.9.0
* (CFX) Add `octopus` algorithm (2% dev fee, see `cfx` bat/sh script), including
* CFX+RXD and CFX+RXD+ZIL (see `dual-cfx-rxd` bat/sh script)
* CFX+ALPH and CFX+ALPH+ZIL (see `dual-cfx-alph` bat/sh script)
* Add OCTA+RXD and OCTA+RXD+ZIL mining support
|
|
|
|
Thank you!
I wait, I like this miner, even if a little lower hashrate compairing to GMiner, Rigel is lower fees too, and very stable!
Keep in mind Gminer inflates reported hashrate by 1% |
|
|
|
Rigel 1.8.0* Add mining support for the following coins (dev fee 1%): * Ravencoin (`-a ravencoin`, see `rvn` bat/sh script) * Neurai (`-a neurai`, see `xna` bat/sh script) * Clore (`-a clore`, see `clore` bat/sh script) * (IronFish) Minor performance improvements for `<algo>+ironfish` dual modes Raven coin, Neural, Clore, Neoxa.. and Paprikacoin, Zatox, Gamepass, Meow coin, Hivecoin, Procyon Coin etc. come true mining with KAWPOW algo. Why split it up on "-a ravencoin", "-a neurai" etc? I had to resort to using coin names for `-a` as different kawpow coins use DAGs of different sizes and it creates a problem where the miner would need to rebuild the DAG every few minutes to mine dev fee. When you specify the coin name the miner knows exactly what you're mining and will be mining the same coin as dev fee thus avoiding DAG rebuilds. |
|
|
|
rigel.exe -a kawpow+zil ^
-o [1]stratum+tcp://rvn.2miners.com:6060 -u [1]XXXXXXXXXXXXXXXXXXXXXXXXXXXX ^
-o [2]stratum+tcp://eu.crazypool.org:5005 -u [2]YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY ^
-w Testing --log-file logs/miner.log
Replacing "kawpow" with "ravencoin" should fix the issue. |
|
|
|
|
Rigel 1.8.1
* Add Neoxa mining support (`-a neoxa`, see `neox` bat/sh script)
Bug fixes:
* (RVN) Miner is incompatible with Hiveon pool
* (ETC) Invalid shares issue introduced in 1.8.1
|
|
|
|
Hi, when dual mining RVN+ZIL?
Tried now and doesn't work.
It should work. What's your config? |
|
|
|
Rigel 1.8.0* Add mining support for the following coins (dev fee 1%): * Ravencoin (`-a ravencoin`, see `rvn` bat/sh script) * Neurai (`-a neurai`, see `xna` bat/sh script) * Clore (`-a clore`, see `clore` bat/sh script) * (IronFish) Minor performance improvements for `<algo>+ironfish` dual modes
|
|
|
|
you can look this pool https://rth.crazypool.org/#/ works with any Ethereum mining software !!!! RTH Ethashb3 Mining Claymore miner works fine 112 mhs low devfee Phoenixminer 0.65 Devfee Teamredminer 1.00 Devfee Teamblackminer 0.5 Devfee Lolminer 1.00 Devfee Miniz miner 107 Mhs 1.00 Devfee T-rex miner 1.00 Devfee Gminer 0.65 Devfee with Old version NBminer 0.70 SBminer 0.50 Ethminer 112 MHS 0.0 Zero Devfee Retminer V2 108 MHS 0.00 Devfee NfsMiner v1.3 102 Mhs 0.00 No stinking Devfee !!!!!! There must be a mistake. EthashB3 is a different algorithm, you can't mine it with ethash-only software. |
|
|
|
|
Rigel 1.7.3
* Add RTH+IRON and RTH+IRON+ZIL mining support (see `dual-rth-iron` bat/sh script)
* Add ERG+IRON and ERG+IRON+ZIL mining support (see `dual-erg-iron` bat/sh script)
Bug fixes:
* (ERG dual modes) Auto-tuner picks low dual ratios resulting in poor performance
|
|
|
|
5 x Nvidia 1060 6 gb Results on ethashb3 RETHEREUM on Mining software mining on https://rth.crazypool.org/Gminer 120,2 MHS Lower energie consumption 377 Watt Old Version 1.00 Devfee And older version 0.65 devfee Phoenixminer 117,5 MHS 0.65 Devfee 400 Watt Rigelminer Best option 115.00 MHS 400 Watt WHY Lower hashrate and High Devfee ?? Lowest Devfee bat Slow teamblackminer 1.99 updated! - Changelog - Added support for EthashB3 on nvidia (The ethereum restart project) Rethereum. 0.5% fee Where did you get those numbers from for Gminer and Phoenixminer? They don't support ethashb3. |
|
|
|
|
