Bin einen Schritt weiter richtige Core Installiert, dann klappt es auch mit der Nachbarin  C:\Program Files\Bitcoin\Data>bitcoin-cli.exe searchrawtransactions 1Q8VghUJkNeFnaKy553b9buUWKxFYL579G
error code: -1
error message:
Address index not enabled Jetzt noch einen Reindex fahren dann sollte es klappen Freut mich zu hören! Mit dem Plugin von mezzomix? |
|
|
|
getreceivedbyaddress <bitcoinaddress> [minconf=1]
Returns the amount received by <bitcoinaddress> in transactions with at least [minconf] confirmations.
It correctly handles the case where someone has sent to the address in multiple transactions. Keep in
mind that addresses are only ever used for receiving transactions. Works only for addresses in the
local wallet, external addresses will always show 0. da liegt aber auch der gleiche Wurm begraben Works only for addresses in the local wallet, external addresses will always show 0So ein scheiss, kann man nicht einfach eine X-Beliebige Adresse nach der Balance und ggf. noch den anzahl der Transaktionen abfragen, ich dachte die Blockchain ist transparent und man kann alles sehen, bis zur ersten Transaktion dem Genesis Block  Ich steh auf dem Schlauch... Der normale Bitcoin-Client trackt nur seine eigenen Adressen. Um alle Adressen zu haben, muss die zweite Datenbank her. Der Link von Mezzomix ist so ein Plugin, oder bitcoin-abe ( https://github.com/bitcoin-abe/bitcoin-abe). Edit: Habe gerade gesehen, dass du ja mit Windows unterwegs bist. Die Plugins sind glaub ich alle für Linux  |
|
|
|
Hast du den Adress-Patch oder bitcoin-abe installiert oder ist das eine eigene Adresse deines Clients? Ich denke getbalance ist nicht ganz korrekt, da dieser Command einen Account erwartet. Auszug aus https://en.bitcoin.it/wiki/Original_Bitcoin_client/API_calls_list: getbalance [account] [minconf=1]
If [account] is not specified, returns the server's total available balance.
If [account] is specified, returns the balance in the account. Evtl. müsste man die Befehle getreceivedbyaddress und/oder listunspent benutzen. Ich kann dir das erst am Abend austesten, habe keinen Zugriff auf meine Node von hier... |
|
|
|
Der Address Index Patch ist auf dem aktuellen Stand und funktioniert mit 0.12.1 bei mir ohne Probleme. Very nice! Danke für's teilen. @Willi das wird wohl der Weg sein |
|
|
|
Hallo zusammen,
ich hab einen BTC Core node am laufen, wie kann ich denn da die Anzahl der Transaktionen und die Balance einer bestimmten Adresse abfragen.
Gruß
Willi
Ich habe das mal getestet, die "Balance einer bestimmten Adresse" geht nur, wenn diese Adresse auch von dem BTC Node gehostet wird. Du kannst keine fremden Balances abfragen. Ebenfalls sieht es mit der "Anzahl der Transaktionen" aus, ads geht nur von eigenen Adressen. Soweit ich weiß, gibt/gab es eine gepatchte Version die Sende- sowie Empfänger Adressen ausgegeben hatte, die hatte ich mal benutzt, um per PHP und MySQL alle Balances zu speichern. Leider gab es da einige Differenzen mit der Zeit, da manche Adressen versteckt waren usw ... Aber halt mich/uns mal auf dem Laufenden, das hört sich interessant an. Wenn die Adresse nicht von der eigenen Node kommt, kann die Balance doch z.B. auch über die API von blockchain.info abgefragt werden. Willi, falls du auf Probleme stösst, helfe ich dir gerne weiter. |
|
|
|
Wow, already 27 racers  |
|
|
|
My first pool is the one that i have registered for the race. As for the other pools, I created multiple BTC addresses to point to ckpool (who knows one day ck will announce an R1 as winner amazing block finder  ) Then, chose "Balance" to the failover strategy so that R1 will cycle through all the mined addresses in a "balance" manner. Maybe I didn't keep my R1 running long enough (always fine tuning the small guy every day).... any members who have successfully cycled to multiple pools? Thanks! а как настроить Antrouter R1 на solo.ckpool.org:3333) Я просто в этом деле новичок. Если не трудно можно подробней(от и до) напишите плиз See this image: http://imgur.com/eiduCyzAs pool worker use your BTC address and a worker extension. Example: | Pool: | stratum+tcp://de.ckpool.org:3333 | | Worker: | INSERTYOURBTCADDRESSHERE_R1 | | Password: | x |
|
|
|
|
Perfect, thanks for the links, zOU! Nice bestshare  |
|
|
|
Last one for sale! PM me if interested.
You have a pm. Cheers minibit |
|
|
|
here's my setup: 6 compac sticks in a BFL 30Ghs enclosure 3 sticks per heatsink 1 superbpag switch 1 fan controller + 2 temp sensors I will probably remove the right hand side cover so I can slide the right fan further away, I'll add a wire grill I like your custom heatsinks very much! Oh man, you have a superbpag hub! I'm looking for such a hub for weeks now, but no shop will ship them to my country! |
|
|
|
I really like your mods Hey andy, can you say how much energy do you have to put into the peltier element? Is this power efficient? Do you have to put more energy into the peltier than into the gekko?  Hi minibit, thanks ! @Peltier: yes, thats really an issue ...  The power consumption is depend on which kind of Peltier-Modul you use.. There are a couple of different sizes, Cooling/Heating power and prices on the market. I´ve used the most available and inexpensive 40x40 Peltier with 12V and 6A max It´s hard, ´cause it´s finally a max. Powerconsumption of ~72 Watts, but as used in my setup and regulated via controller my Powermeter shows me max ~ 50W for Peltier & Fan together. But it was only a first try, there are smaller Peltier-Modules with lower consumption (and higher prices ) on the market. Next step will be to try it with a more efficient Module... On the other side I have digged up an older project of me, where a miner could be completely supplied via a selfmade solarpower solution So I´ll take an other R1 of me soon to upgrade this and give it a try for a "Green-IT nature-friendly mining solution" andY Cool Yeah they look really expensive. Conrad has some, but maybe they are cheap quality? So the cooling capacity of a peltier element is the difference between the hot and cool sites? Say, if my Peltier has a temperature diffeence of 60° C, that's the cooling capacity? I'm new to peltier I like the idea of a mini solar array. For a single Gekko or R1 it's not that expensive. But the learning potential is huge. |
|
|
|
What was the total hashrate? btw I can be added to the run now! solo.ckpool.org/users/1KumpjxTB6scqwaZCXEwNx3jqEkRQh44dL Country is UK Hi jacobmayes94 Cool! Ammi will soon add you to antrun.de. Have a nice race |
|
|
|
I really like your mods Hey andy, can you say how much energy do you have to put into the peltier element? Is this power efficient? Do you have to put more energy into the peltier than into the gekko? |
|
|
|
So, like promised, here some infos and a couple of first pics from my Peltier-cooled R1 Mod... (Sorry, links only, but I hope, I get the Full member status asap, so I´m able to insert the pics directly) What I´ve done with the R1 before:1. disabled the internal power supply and using a Powerbrick with 5 Volt/10 Amp as supply 2. first trying to use heatsinks on both sides of BM1384, but decided finally to reuse the original case, because it´s in my eyes a good solution for heat dissipation 3. using twice new cooling pads on each sides of internal BM1384 for more pressure and better cooling conditions! 4. Vcore Mod with pot for variable VCore between 0.6 up to 1V 5. adding a Vcore voltmeter 6. add an Sharkoon HPS1 7. add an Peltier solution But here finally some pics : 1. Sharkoon HPS1 Cooler stuffed with a 40x40 Peltier2. Sharkoon HPS1 Cooler with Peltier saddled up on the R1 Mod 3. First try - in front the Peltier-Controller Board4. First working Temp Measure: note(!) In=Ambient Temp 25.1C , and OUT=Minertemp! = 24,9C 5. First test @300MHz / Vcore 0.724 Volt6. Second test @475MHz / Vcore 0.891 Volt working Temp Measure: In=Ambient Temp 24.7C (opened Window ) and OUT = Minertemp=41,1C7. Third test @475MHz / screwed up Vcore to 0.900 Volt 8. Closer look @R1 running on 475Mhz9. Screenshot of my Power Measuring Software - Consumption between 25 and 27 Watts @475MHzThats it for now If any questions, feel free to ask me. andY Holy cow, this is sick!  Very cool to see! Thx for sharing. |
|
|
|
Hi ammi, is it possible, to expand the antrun.de MHz-Range to 500MHz? I got my first successfully working tests @475MHz / 462.5MHz . It´s now possible with a special selfmade Peltier-Cooling solution ) Thx, andY Can you post a picture of your R1? Cooling with Peltier sounds nice! @Rich: Your second R1 is very lonely at the bottom of the list!  |
|
|
|
|
Does anybody know what is causing these extreme spikes in the hashrate? Are they legit?
Would it be better, if we switch to "hashrate5m" instead of "hashrate1m"?
Edit: I'm talking about the chart at the front pages of Antrun and Gekkorun, not the individual racer stats...
|
|
|
|
Hi
Only submitting shares 4096 and upward.
You set your diff to 4096? |
|
|
|
If you want to join us - you are very welcome. Please post in the Thread: - Username
- Country-Code
- BTC Worker
Alright, I freed up one of my gekko sticks so that I could participate in the fun run. - Username: Mikestang
- Country-Code: USA
- BTC Worker: 1CaLS7xKPtCT4Vq4Q23Rr6paWX8E1Uyxkd.calgekko
- Freq: 356.25
Since I'm from California I think the 1CaL address is an omen. Too bad I don't have a S7, 1CaLS7 is pretty sweet. Good luck, racers! Nice, Mikestang I added you, but screwed up your country code, the flag will not be displayed at the moment. Ammi has to fix it |
|
|
|
Hi fellow friends, minibit and i are working behind the scenes for a nice badge-system. for this - we need some suggestions and feedback to our first ideas and if you want more badges or some are obsolete or something :-) Our first ideas: Antrun/Gekkorun Badge System
==========================
Highest Bestever
----------------
Will be given to the Racer with the highest 'bestever'. This badge is not round based and will change on new values immediately.
Most Devices Badge
------------------
Will be given to the racer(s), with the most devices registered.
If multiple racers have the same amount of devices, then all of those will get this badge.
This badge is not round based and will change on new values immediately.
Fastest Racer
-------------
The race with the highest 'hashrate1m' (average of all values of the round) will receicve this badge.
Lamest Racer
------------
The counter piece to 'Highest Hash Rate'. The racer with the lowest 'hashrate1m' (average of all values of the round) will receicve this badge.
Maybe too offending?
Most First Places
-----------------
This badge will be given to the Racer with the most rounds finished first placed.
If multiple racers have the same amount of wins, then all of those will get this badge.
Donator
-------
Will be given to all racers, which supported this run with time or money.
Please use the vote here - it helps us a lot - thank you http://doodle.com/poll/q722tcqynmv9r8xiThank you a lot for your help ammi & minibit Like the badge ideas, except for the following. 1m is a very poor measure prone to error because of the very short period of time, would be better to use 1 day? lamest / slowest cannot see any merit in this? Most devices, not sure about this as likely it will always be won by the same person? Rich You could only "win" the badge ""Fastes Racer". Each round the winner will be tracked. The racer with the most wins, gets this badge. All other Badges wouldn't be "Round Badges", they will be adjusted as soon as a change occur. It's no problem to take the hashrate1d instead of hashrate1m. |
|
|
|
Die Bestever von Real-Duke im Antrun ist ja höher...
Hey, nicht so negative sehen --> real-duke wird wahrscheinlich nie wieder einen besseren Share haben --> wir haben in diesen oder auch in den nächsten Monaten einen Block --> wir müssen nur am Ball bleiben --> wer nach einem Monat aussteigt wird sich dann ärgern wenn man im nächsten Monat einen Block findet ;-) Ja hast recht Dass kein Block gefunden wurde, hat mich noch nie abgehalten trotzdem mitzumachen |
|
|
|
|
Show Posts
