Wow I just got my first moonlander 2 today cause it was  so hard to find them and I am so impressed.  It took me like 5 minutes to set it up and mine.  Thanks to whoever created this masterpiece.

How do I run several miners such as my USB stick litecoin/bitcoin dual miners and my Gridseed miners on cgminer.  Do I have to open up several instances of CG miner for each miner or can I run all of them off the same cgminer instance.  And when these autodetect how do they autodetect each one through each device driver you download when you hook them up...  Thanks so much for any replies I appreciate it....I hope this made sense.BTC I want to run everything off of one computer...

How much for one with psu.

that is awesome also I have a meter that monitors my kWh right off of my power line coming out of my breaker box into the house then it sends the data via WiFi to my unit.  I am able to see in real time how much I am burning electricity.  I have been adjusting all the lights and everything that was sucking power 24/7 from children.  Now every device I turn off I can see how much each is using in electricity.  If you guys want one they are only like 160 dollars I will put a link in the description.  Anyway I figure that eliminating all of the blood suckers throughout the house that my bitcoin miners can use the power that I was using to light the house up for nobody.  Also I live in north Idaho so I put my ant miners underneath my thermostat because we pretty much have 8 months of winter, and they will help keep from the thermostat kicking on all the time.  I don't know if all of these cost savings will help but we will see.  BTC  https://www.amazon.com/Efergy-Home-Hub-Elite-Combo/dp/B00I2XM5RS/ref=sr_1_4?ie=UTF8&qid=1467561807&sr=8-4&keywords=efergy it has a cool web portal and you can access on your phone

   is .08 kwh cost effective for bitcoin mining, also if its a business that draws lots of power it is .04 per kwh?

ok guys I got my bitminer going I switched it to dhcp with some great help from a friend, and then I was able to go into my router and look at the ip address being used by ethernet one on the back of my modem/router.  I can't believe it was that easy.  If anybody runs into problems trying to setup their miner with Frontier Communications I can help you out.  Thanks for all the replies and sorry for the small posts.

yes there is a mac address assigned to it I did an ip search and everything is connected and working.  Now I just have to figure out how to get my miner going.

Ok guys here I go again I am able to log on to the interface and set up my miner but once I do nothing happens? here is the info my computer won't let me take screen shots so I am copy pasting
   antMiner
Model   S3
Firmware Version   Fri Jan 9 20:41:34 CST 2015
Kernel Version   3.10.12
Local Time   Mon Dec 2 11:42:52 2013
Uptime   0h 15m 6s
Load Average   0.00, 0.04, 0.09
Memory
Total Available   
48848 kB / 61568 kB (79%)
Free   
38852 kB / 61568 kB (63%)
Cached   
7772 kB / 61568 kB (12%)
Buffered   
2224 kB / 61568 kB (3%)
Network
IPv4 WAN Status   

eth1    Type: static
Address: 192.168.1.x
Netmask: 255.255.255.0
Gateway: 192.168.1.1
DNS 1: 192.168.1.1
Connected: 0h 9m 35s
Active Connections   
85 / 16384 (0%)
DHCP Leases
Hostname    IPv4-Address    


the above is off of the front screen of my miner status

follow up three it must have been windows 10 because when I went to connect the miner to the modem it said that there was an update to fix the issue.  Windows restarted and connected tom my miner and the internet.  which before I could only do one or the other.  Should I keep my miner on static or switch it to dhcp.  I also was able to change my miner address I found out at my security camera shared the same ip address as my miner how crazy is that. 

 update 2 I ran my ehternet cable from my computer and reset it again.  I was able to access the interface and I changed the address should I have changed it from static to dhcp.

Status   Name   IP   Radmin   Http   Https   Ftp   Rdp   Shared folders   NetBIOS group   Manufacturer   MAC address   User   Comments
Ok   192.168.1.xx   192.168.1.xx                        Shenzhen Ogemray Technology Co., Ltd.      Update after I set it up the old owner had it set to a specific address so when I changed from static to dhcp it went back to the address he had it set at.  I checked the unit as it is hooked up to my router and is working great.  Ok whats the next step to get my router to tie to my computer.   When I changed from static to dhcp it inactivated the 192.168.1.99  and activated the top number I know thats it now how to access it.   thats listed as inactive under my ip scanner.  Ok whats the next step.lol  Thank you so much for any help as I am a disabled veteran.  my pc is a custom built Intel I7 4th generation computer running windows 10.  this one is  Dead   192.168.1.99   192.168.1.99      Paragon Technologies Inc.      

 

    I'm pretty upset and frazzled, I received a bitmain antminer s3 for my son and I to work on together as a hobby he is 9, and I recieved it today.  I was really excited and thought the installation would be straightforward but no it was anything but that.  I had it hooked up to my router and I could not find it after following the intructions so I hooked it up straight to my computer typed in the default ip address and walla there it was I followed the intructions and went into the client using root root then I changed the network settings form static to dhcp that when everything went wrong I hooked it back up to my router and was not able to find it so I hooked it up once again and ran the ip scan to find out what the new ip address was two items came up my router and shenzen something technology.  I typed that ip number into my address search bar and nothing came up.  I am lost now please help.