Has anyone been able to successfully use the RTX2060/2070 on Bminer yet?  Doesn't seem to be recognizing/communicating with the GPU drivers 410

I just installed the Bminer-ethos and am trying to connect to F2Pool... How do I set my user?  Right now it is mining but for F2pool instead of for us.

The fans should control themselves based on the chip temps.... If you really want to run it cooler you can flash the firmware and on the first boot you will have the option to change the core frequency.  Try under clocking it a bit.  Then you will run cooler, but less hash rate.  
Hope this helps!

Just completed that test.... When i hook an S9 up to an IBM Blade center 2880 it runs just under 1400 W.  We hook it back up to the Bitmain and it shoots right back up to 1500ish Watts...... Garbage.

Noted.... In the future don't use Bitmain PSU's.... I knew they were suspect, but this is really bad performance.  If it's one or two units then not really a big deal, but when spread across an 800 unit deployment it definitely has an impact on our engineering for this particular deployment.

Guys,

  Anyone else noticing that the Bitmain S9 13.5Th/s from the latest batch is not really pulling 1.4 kW.   It seems that there are HUGE variances in manufacturing quality of the Bitmain PSU's.... We have a few units pulling what they should (1.4-1.44 kW) but there are a ton of units we deployed pulling 1.5-1.55 kW.   Anyone else seeing this??

-AH

We've been a supporter of this project for a while, and we'd like to offer a donation of rack space and hosting for you guys.  Hit us up and we can work out the details.

Straw Man? Ahhh I see who we're having a discussion with now.  Thanks for your time.  Enjoy your day.

Just in case anyone wants to see the factual information...

https://www.eia.gov/electricity/monthly/epm_table_grapher.cfm?t=epmt_5_6_a

Unfortunately that information is totally incorrect.  .05 US kWh for residential is virtually unheard of.  In the US our residential rates vary from .10 - .18 +
.05 cents per kWh is lower than we pay for industrial/commercial rates. 

With that being said - You also have to factor in service size (480V 1.5 mW), transformers (480V to 208V), Air conditioning to keep the rigs cold, PDU's on server racks, racks them selves, the list goes on and on.  So comparing a rate (residential US or Canada) to a data center is apples to oranges.  No comparison at all.  Also you have to factor the cost of asymetircal fiber to your home connection as well plus all of the networking gear....  Again - no comparison from a home user to a professional environment.

Thanks for the feedback.  We are working on a new build with the 480.  We are estimating around 240 mhs.  Not ready for sales yet on it though. In quantity the 480 units are hard to come by plus we have to get the modded firmware stable before we offer to end users. 

Thanks for comments on our facility!  We've put a lot of hard work in getting it expanded.  As far as the details of the facility go -

*  1.5 MW of total capacity (Up from 750 kW)
*  240 rack spaces added.
*  We have recently expanded our capacity and have hosting spaces open and dedicated for Bitcoin mining.
*  In addition to traditional clients we already host for several Bitcoin mining clients so we have experience in your field.
*  Our facility has dedicated fiber lines with redundancy to ensure your rigs stay connected and mining!
*  Our facility also has an 80 ton chiller dedicated to our space to make sure the rigs stay cool.
*  Currently we boast 98%+ up-time!!

Our rates are tiered in structure based upon your power demands, and start at 10.5 cents per kW all in ($75.60 per month / per kW).  No rack fee, no set up fees, none of the nickel and dime stuff that most data centers hit you with.  If you are interested in hosting please PM us for details and we will provide you with all necessary information. 

Thanks again!

What are your thoughts???

* Brand new FUEL160 ETH/EXP/ETC mining rig
* Rack Mountable & Built inside a durable 4U server Chassis.
* 160 Mhs+
* 980W at the wall
* Single PSU
* The first actual plug and mine ETH miner!


Priced at $3,299/unit is there any other rig to even consider??


www.facebook.com/AvalancheHosting

While we of course disagree with our advertising such an amazing item being labeled as spam we are all entitled to our opinion.  

In any case there are discounts for volume purchases. $3,299 is the price if someone is to only purchase a single unit.   Thus far most of our orders have been 20+ and single unit retail sales don't happen very often.

Thanks for the feedback!

What are your thoughts???

* Brand new FUEL160 ETH/EXP/ETC mining rig
* Rack Mountable & Built inside a durable 4U server Chassis.
* 160 Mhs+
* 980W at the wall
* Single PSU
* The first actual plug and mine ETH miner!


Priced at $3,299/unit is there any other rig to even consider??


www.facebook.com/AvalancheHosting

Can the community weigh in on this?


* Brand new FUEL160 ETH/EXP/ETC mining rig
* Rack Mountable & Built inside a durable 4U server Chassis.
* 160 Mhs+
* 980W at the wall
* Single PSU
* The first actual plug and mine ETH miner!


Priced at $3,299/unit is there any other rig to even consider??


www.facebook.com/AvalancheHosting

Avalanche Hosting is an existing 1.5 MW Data Center located in North Carolina, USA!

*  We have recently expanded our capacity and have hosting spaces open and dedicated for Crypto mining.
    * This is in addition to the >8,000 Mhs of ETH mining we currently manage!!
*  In addition to traditional clients we already host for several Bitcoin mining clients so we have experience in your field.
*  Our facility has dedicated fiber lines with redundancy to ensure your rigs stay connected and mining!
*  Our facility also has an 80 ton chiller dedicated to our space to make sure the rigs stay cool.
*  Currently we boast 98%+ up-time!!

Our rates are tiered in structure based upon your power demands, and start at 10.5 cents per kW all in.  No rack fee, no set up fees, none of the nickel and dime stuff that most data centers hit you with.  If you are interested in hosting please PM us for details and we will provide you with all necessary information. 

We also provide custom ETH mining rigs in 4U server chassis that mine at a minimum of 160 mhs drawing just 980 W.  These units are available for shipping and do not have to be hosted with us, but package discounts would apply if you do host with us. The price begins at $3,499/unit, and again discounts are available for bulk purchases/hosting.

As interest demands we do offer *Limited* cloud mining services on ETH only.  Packages here begin at $1,800 for 100 Mhs on a six month term or $3,200 for 100 Mhs on a 12 month term.  (Yes we are cheaper than Genesis-mining)

**For larger orders escrow is required through Padrino.  **

****Visit us on Facebook for updates!!  www.facebook.com/AvalancheHosting ****
Thanks for considering Avalanche for your hosting needs.

Our Facebook page is now up as well!!  Thanks for all the support so far everyone!

https://www.facebook.com/AvalancheHosting/

We still have capacity left open to meet your hosting needs!

We still have capacity open for hosting!  We look forward to serving your mining needs!

Avalanche Hosting is an existing 1.5 MW Data Center that is accepting new clients.

*  We have recently expanded our capacity and have hosting spaces open and dedicated for Bitcoin mining.
*  In addition to traditional clients we already host for several Bitcoin mining clients so we have experience in your field.
*  Our facility has dedicated fiber lines with redundancy to ensure your rigs stay connected and mining!
*  Our facility also has an 80 ton chiller dedicated to our space to make sure the rigs stay cool.
*  Currently we boast 98%+ up-time!!

Our rates are tiered in structure based upon your power demands, and start at 10.5 cents per kW all in.  No rack fee, no set up fees, none of the nickel and dime stuff that most data centers hit you with.  If you are interested in hosting please PM us for details and we will provide you with all necessary information. 

We also provide custom ETH mining rigs in 4U server chassis that mine at a minimum of 160 mhs drawing just 980 W.  These units are available for shipping and do not have to be hosted with us, but package discounts would apply if you do host with us. The price begins at $3,499/unit, and again discounts are available for bulk purchases/hosting.

As interest demands we do offer *Limited* cloud mining services on ETH only.  Packages here begin at $1,800 for 100 Mhs on a six month term or $3,400 for 100 Mhs on a 12 month term.  (Yes we are cheaper than Genesis-mining)

**For larger orders escrow is required through Padrino.  **

Thanks for considering Avalanche for your hosting needs.