no problem but you first send SS (on srbminer and other miner) for your hr on pool and miner. If you use shit/cheters pool this is your prolbem not my. i have hr on miner and pool identical.
check your pool again. lot of new job but no shares. and realy excellent local rate ))) |
|
|
|
Please help. I have 5 video cards in my rig and I dont have any issues making 4 out of 5 of them work. The 4 that work are RX 480/580 cards. Card 5 which gives me the fit is a R9 290. The secont I fire up srb with the 290 installed I get this problem. I am using 18.6.1 driver but have tried others. Im using SRB 1.7.6 but have had this issue with all versions. My setup is 1 Red Devil RX480, 1 XFX RX580 GTS-xxx, 1 Nitro+ RX580(samsung), 1 Nitro+ RX580(hynix). All 8GB cards. No issues. When I introduce the Sapphire R9 290 Tri-x 4gb card I get this issue. I have virtual memory set at 36000gigs and am running windows 10.
PLEASE HELP!!!!
cache cleared? do you use olcard in config? |
|
|
|
What hashrate you have with webchain?
it should be a little lower than v7 strange rate on webchain. one rig work fine with rate 80-85% from local. but if add 1-2 rig have lot of rejected duplicate share and rate 40-60% [2019-01-06 15:11:54] Pool accepted result 0xC80AD1CD [121ms] [2019-01-06 15:11:54] Pool sent a new job (ID: 96e16412aab5c1865246e58fd67b6cdc) [2019-01-06 15:11:56] Pool accepted result 0xD4AEDD68 [92ms][ S] [2019-01-06 15:11:58] Pool sent a new job (ID: 2825b66be399a209ae1f10f5bf4ef5fb) [2019-01-06 15:12:01] Pool rejected result 0x64858290 (duplicate share) [2019-01-06 15:12:11] Pool difficulty: 20000 [2019-01-06 15:12:11] Pool sent a new job (ID: f4b8fcf6c5cec6a16d8d1ea973e90ece) [2019-01-06 15:12:17] Pool sent a new job (ID: 06ca85cfb801ec7bd6ca43e63a1be417) [2019-01-06 15:12:25] Pool rejected result 0x98A210FA (high rate of invalid shares) [2019-01-06 15:12:34] Pool difficulty: 20000 [2019-01-06 15:12:34] Pool sent a new job (ID: 06ca85cfb801ec7bd6ca43e63a1be417) [2019-01-06 15:12:39] Pool sent a new job (ID: 8c6b120b42492e89f9f546388378ec2b) |
|
|
|
|
1.7.6
key O P dont work. dont swich to next pool on webchain algo. other algo work
|
|
|
|
V1.7.6
- Webchain sending stale shares again
+ Now showing time in ms for shares. This is the time needed for:
test webchain now. speed better. lot of stale shares but lot of good shares too. excellent info time for shares |
|
|
|
who test webchain algo ?
What are the best intensity and worksize for Radeon RX550 series gpu ?
read two previous page. webchain work very poor 2 gb and 4 gb different setings |
|
|
|
Anyone have any ides??? try to help a friend with his home miner.
Miner will mine on blockchain driver. this is on win10 x64 build 1709 or 1809 (doesnt like 1803 at all)
if i load any of the more current driver ie: 18.3.4,18.5.1,18.6.1. miner just hangs when ran, it does the same with other miners. if I DDU and go back to blockchain drivers it still wont mine. I have to either reinstall windows or update windows then recover. this miner was running fine for months, its a dell inspirion 3847 turned 3gpu miner, the pc updated to 1803 and ever since no matter what i do, complete format, delete partitions, start fresh results are identical. ive mixed a matched the riser cables, pluged the gpu directly on the board, updated the bios to latest. ive never had this kind of issue where a fresh install wouldnt fix.
TIA
use 1607 corporate with update disable |
|
|
|
|
hi dok! any news about webchain? coin trouble? or will be fixed in new release?
ps ready for test new prerelease )) wait in pm
|
|
|
|
I'm getting 300-400h with intensity set that low. Yes, compute is turned on.
{ "id" : 0, "intensity" : 50, "worksize" : 16, "threads" : 2},
For all cards. It gives me 300-400h.
check compute mode and use "intensity" : 58, "worksize" : 8 also this trouble possible if use afterburner and temp limit low |
|
|
|
I haven't mine cryptonight coins for long time. I wanted to switch for haven, but I'm getting only 400h per card (rx580 8GB).
I can set intensity to 270 and get over 1200 per card but SRBMiner is not submitting any hashes then. Anything over 50 intensity is not submitting any hashes (tried worksize 4, 8, 16, 32).
Any ideas?
write config here compute mode on for this card? i=57-59 for 8gb card |
|
|
|
|
1.7.5 bit more on 570\8gb card on tube algo
|
|
|
|
V1.7.5+ Webchain is a weird coin  To set the worker-id , use the 'worker' parameter in pools.txt file worker work but no shares on webchain. hashrate on pool very low |
|
|
|
Are you running the latest 1.7.4?
plz fix webchain algo and add rigid in new version |
|
|
|
Hello Doktor. Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)? With v1.7.2 - 1250+ With v1.7.4 - 1000-  use 1.7.4 now tube algo. GPU7 rx580 8 gb [2018-12-29 08:46:53] GPU0 : 1122 H/s [T: 49c, RPM: 822, CC: 1150 MHz, MC: 2030 MHz][BUS:1] [2018-12-29 08:46:53] GPU1 : 1122 H/s [T: 49c, RPM: 943, CC: 1150 MHz, MC: 2030 MHz][BUS:2] [2018-12-29 08:46:53] GPU2 : 1119 H/s [T: 49c, RPM: 974, CC: 1150 MHz, MC: 2030 MHz][BUS:3] [2018-12-29 08:46:53] GPU3 : 1068 H/s [T: 39c, RPM: 1097, CC: 1150 MHz, MC: 1900 MHz][BUS:4] [2018-12-29 08:46:53] GPU4 : 1121 H/s [T: 48c, RPM: 1009, CC: 1150 MHz, MC: 2030 MHz][BUS:6] [2018-12-29 08:46:53] GPU5 : 1120 H/s [T: 49c, RPM: 1250, CC: 1150 MHz, MC: 2030 MHz][BUS:7] [2018-12-29 08:46:53] GPU6 : 1122 H/s [T: 47c, RPM: 925, CC: 1150 MHz, MC: 2030 MHz][BUS:8] [2018-12-29 08:46:53] GPU7 : 1164 H/s [T: 50c, RPM: 1635, CC: 1150 MHz, MC: 2000 MHz][BUS:9] |
|
|
|
More STALE and DUPLICATE share on webchain algo. No worker statistic, need worker-id parameter. Please, fix it. Thanks.
confirm |
|
|
|
I re-uploaded 1.7.4 if anyone was wondering, because i fixed a bug with webchain, that caused compute errors on some cards.
plz upload bugfix as new version |
|
|
|
two card in test rig
rx480 4 gb and !!!!! r9 290 4gb
off r9 290 card and all work
1.7.4 have trouble with old card
going to check that out, i know that rx480 works, but probably i forgot to update the kernel for old cards edit: Bingo, re-uploaded , try it now and reportwork fine bit more rate +1-3% on both card with same config |
|
|
|
|
two card in test rig
rx480 4 gb and !!!!! r9 290 4gb
off r9 290 card and all work
1.7.4 have trouble with old card
|
|
|
|
need to read first page where it's written:
Don't copy newer version of miner over old one, or if you do make sure you delete .srb files from Cache folder before running it!
cache folder clean/ but have error [2018-12-27 15:57:54] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for cn0, bloblen for DeviceID 1 (Thread 3) [2018-12-27 15:57:54] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for cn0, bloblen for DeviceID 1 (Thread 2) [2018-12-27 15:57:54] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 3) [Increase virtual mem] [2018-12-27 15:57:55] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 2) [Increase virtual mem] |
|
|
|
|
Show Posts
