I'd just order from the manufacturer. I've heard a lot of bad things about Asicminermarkets. Don't touch it
MOQ 6 still actual ?
|
|
|
And what are the estimate earnings on Qubit per X10 these days?
Estimtated is more.... In real I had 0.01911 BTC a day per X10 last days. Avarage result of 3 Baikal X10 Are you serious? you are saying 0.00637 BTC per day per X10? which pool really is it? 0.001911 BTC a day per X10 !!! It is starpool.biz on qubit algorithm stratum+tcp://qubit.starpool.biz:4733 we dont go on this pool uncapable to link wallet with good icons and i didnt except the worst ! and yes i tested it i understand before 24h it was not a good pool dont about around more than 10$~15 / day this time mens ....
|
|
|
how to swap aspect coin ?
|
|
|
Anyidea why local service do not install SRR service ? the file is unlocked , i use it on other rigs :s
it s srr v1 ...
|
|
|
Is there a version similar but for D3?
i dont think so sorry
|
|
|
Here's the issue you may have , hashboards are not recognized, anymore /!\ please read carefuly /!\************************************************************** Firmware Flash ************************************************************** Here's a fix solution to rewite PIC's of L3+ after some of us flash bad firmware to their L3+.Many has recovered 3 boards , some all of it Thanks to Blissz for this fix (please do not pm him for this ) 1. Download File(re-up) WARNING: Don't flash this to anything else as a bricked L3(+) caused by flashing a wrong firmware version, as this might harm a working L3(+).MEGAor 1fichier 2. Plug only 1 board from chain 0 (white cable on the left) as you can see under , you can plug upper hashboard 1st3. Go to system -> Upgrade -> "Flash new firmware image" choose the file downloaded to flash new firmware and click flash image wait for reboot. If kernel logs get this ... 0xcc , wait after you see it ( 5 minutes, to see again 0xcc or most of time 0x3 and then it will fix your board) other way try to connect an other boards and restart from "3" Dec 17 14:09:30 (none) local0.warn cgminer: Started cgminer 4.9.0 Dec 17 14:09:30 (none) local0.notice cgminer[377]: detected at /sys/class/gpio/gpio51/value chain 0 Dec 17 14:09:30 (none) local0.notice cgminer[377]: detect total chain num 1 Dec 17 14:09:30 (none) local0.notice cgminer[377]: i2c init ok Dec 17 14:09:32 (none) local0.notice cgminer[377]: Chain 0 PIC Version 0xcc Dec 17 14:13:45 (none) local0.err cgminer[377]: Blisssz: Chain not found 1 Dec 17 14:13:45 (none) local0.err cgminer[377]: Blisssz: Chain not found 2 Dec 17 14:13:45 (none) local0.err cgminer[377]: Blisssz: Chain not found 3 Dec 17 14:13:51 (none) local0.notice cgminer[377]: Chain 0 PIC Version 0x3 [...] you will see some logs like this , PIC's is currently writing. Dump IIC Data:[41][98][0][0]@ChainID:[0], Chip[C9] wait logs "miner start and switching pool" the board has been flashed with success. After fixing all or some of boards , you can finaly flash back bitmain l3+ original Firmware.************************************************************** Manually Flash ************************************************************** /!\ I will not assist with "how to" here cause i didnt experience it yet but if you have stuff (pickit3) and knowledge to manually flash chip of your miner here's the files ! warning ! have a look to the pic version you have (writed on the chip). there is PIC16F1704 or PIC16F1705 Here's the hexa files for each version MEGA PIC16F1704.hexPIC16F1705.hex1FICHIERPIC16F1704.hexPIC16F1705.hexThanks to martin_fryc for sharing files, after succefully fix his L3+ by manually flashing PICs************************************************************** hello Sir I am looking on the board for the pic chip number and i cant se it please help me? thx steve its directly write on the pic (find 5 linear wholes) the pic is just close to some people say the manual flash is working and not depending the pic you have , in fact flash any of 1704 or 1705 file. i didnt experience manual flash. and people did it , dont send back tutorial. hopefully someone send the files , thanks again to him
|
|
|
unimining has lot of share lost and disconnect mining , i dont want to provide anypool but i have no problem since i am on antmine pool ! so i recommand to leave unimining and go on other pool , because it s not trust for reliable for proof about that antmine is going from 500gh to 4 th in less than 1 day , that because of lot of people lose time on uniming and see the problem of connection. so dont waste time and earns friends
|
|
|
Hi rx470 8 G Claymore v11.0 win 10 (1709 B16299.15) my hash is 29+ for a while then drops 22+ any ideas?
Thanks Mego
have a look to -dcri instensity use + or - when miner is running to test what value is better
|
|
|
c=XVG
Read the instructions on zPool first!
Well - actually I read the instructions and used the symbol they provided and it worked. Switched to unimining anyway as zPool's fees are too high. yep cant understand how people dont see those hidden ~15% "exchange" fee
|
|
|
Nice job claymore , hope keccak dont took you too much time , it s an old ... algo, x17 would better anyway thanks to follow my blake2s request , as told before , i think it was the best choice actually. you saved our dual mining and again proove your deserve your (2%) fees /love ya
|
|
|
how to sync the wallet ? no block source avalaible ?
|
|
|
Hi guys
Not sure where to post this maybe useful information.....
I did some test with my X10 and I find that the Giant-B and X10 are the same machine.
The only difference is of course the OS inside the SD card and the firmware inside the controller board (blue card with ST microcontroller)
So, what I did is install the Giant-B image on my X10 .... :-0
The miner start like normal. The interface show all correct and also the hash cards show the right frequency and right hash power.
At this point I try to connect my unit at a lby pool..... The pool accept the connection but the miner reject the data to decrypt.
Ask me some question if you want...
Ciao
someone still try that , there is difference between miners i think , may be in memory data / pic or else , it cant be exctly the same , or your miner wont reject data
|
|
|
when nist5 algo goes live , the device will cost 20k in ebay wait and see no because the profit will fall
|
|
|
Hi all,
Board 1,2,4 works perfect, Board 3 comes up and after few sec. the MH/s(RT) are 0.
Can using this FIX ?
Thanks Marcus
this do not seem an pic problem. if the board dont show 0 asic in logsd at start , this fix wont fix it
|
|
|
no concurrence , big team but unknow project. will need more social network and biggest exchange will be a good long investment
|
|
|
go on cryptobridge exchange !
|
|
|
We need support for Dual Mining like blake2s
Yes, currently I'm looking for good PoWs for dual miner, it takes a lot of time. It seems blake2s coins are not popular. there is many coins , at least popular multi aglos like verge & shield. i can imagine it took time , but dual miner will become only ETH soon. For your fee , update could be nice ... and permit us to continu raise dual assets regards , and thanks for tooking time to answer.
|
|
|
how can we sign up on website ? only sign in option
|
|
|
|