pls help

[bit66coin]

is there someone who can make this txid confirm for me i accidentily used too low fee https://blockchain.info/nl/tx/f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

[mocacinno]

is there someone who can make this txid confirm for me i accidentily used too low fee https://blockchain.info/nl/tx/f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

There are several ways to solve this problem.
A long time ago, i wrote a wizard to help you with stuck transactions, near the bottom of this page you can find your options:
http://www.mocacinno.com/feecheck.php?txid=f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

I also have access to antpool's transaction prioritiser (i hope it still works). If you can't figure out how to solve your problem by tomorrow morning, i'll try to push it to antpool (i'm just about to leave the office right now, so i can't push your transaction right now)

[bit66coin]

is there someone who can make this txid confirm for me i accidentily used too low fee https://blockchain.info/nl/tx/f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

There are several ways to solve this problem.
A long time ago, i wrote a wizard to help you with stuck transactions, near the bottom of this page you can find your options:
http://www.mocacinno.com/feecheck.php?txid=f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

I also have access to antpool's transaction prioritiser (i hope it still works). If you can't figure out how to solve your problem by tomorrow morning, i'll try to push it to antpool (i'm just about to leave the office right now, so i can't push your transaction right now)

can you try to push it for me since i am very noob and dont understand anything on your website

[xIIImaL]

is there someone who can make this txid confirm for me i accidentily used too low fee https://blockchain.info/nl/tx/f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

I have tried to accelerate the transaction using the viabtc accelerator but It pop up and submission limit exceeded. You please check from your side, it might be work from your IP. https://pool.viabtc.com/tools/txaccelerator/
Pushtx site will easily accelerate your transaction without any worry but fees is ridiculous bro. Check the below link too.

https://pushtx.btc.com/#/

[bit66coin]

is there someone who can make this txid confirm for me i accidentily used too low fee https://blockchain.info/nl/tx/f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

I have tried to accelerate the transaction using the viabtc accelerator but It pop up and submission limit exceeded. You please check from your side, it might be work from your IP. https://pool.viabtc.com/tools/txaccelerator/
Pushtx site will easily accelerate your transaction without any worry but fees is ridiculous bro. Check the below link too.

https://pushtx.btc.com/#/

i already tried that it says low fee....

[aleksej996]

Try CPFP. That is a method when you act like that transaction is confirmed and spend those coins from those addresses, but in this new transaction where you spend those coins, you set a fee large enough to cover both of them. To do this just enable sending of unconfirmed balance from your wallet and set the fee to using this site bitcoinfees.21.co and using the sizes of that transaction and the new one. For the reference, that transaction is 1110 bytes and the new one could around 340 bytes. That is 1450 bytes and for an example you use 180 satoshis/byte, you get 261000 satoshis total for the new transaction or around 768 satoshis/byte since the new one could be around 340 bytes, but it could be way bigger then that, depending on how many unspent outputs you use from the 143wJEpgvFrJSwLaP8UQRBFod7a5u8j6hV address.

If you are using Bitcoin Core, then you can specify exactly all of these things, just go to Options and click on the Wallet tab, then check both "Spend unconfirmed change" and "Enable coin control features". Then just go to Send tab and select the inputs from that transaction set the new address and set the appropriate fee. That should do it.

[jackg]

Try CPFP. That is a method when you act like that transaction is confirmed and spend those coins from those addresses, but in this new transaction where you spend those coins, you set a fee large enough to cover both of them. To do this just enable sending of unconfirmed balance from your wallet and set the fee to using this site bitcoinfees.21.co and using the sizes of that transaction and the new one. For the reference, that transaction is 1110 bytes and the new one could around 340 bytes. That is 1450 bytes and for an example you use 180 satoshis/byte, you get 261000 satoshis total for the new transaction or around 768 satoshis/byte since the new one could be around 340 bytes, but it could be way bigger then that, depending on how many unspent outputs you use from the 143wJEpgvFrJSwLaP8UQRBFod7a5u8j6hV address.

If you are using Bitcoin Core, then you can specify exactly all of these things, just go to Options and click on the Wallet tab, then check both "Spend unconfirmed change" and "Enable coin control features". Then just go to Send tab and select the inputs from that transaction set the new address and set the appropriate fee. That should do it.

RBF if better than CPFP IMO.
In rbf, a separate transaction is produce with the same inputs and outputs, just with a higher fee. So it'll get confirmed faster and the other transaction merely gets rejected (ensure it is the same script you're spending from).

is there someone who can make this txid confirm for me i accidentily used too low fee https://blockchain.info/nl/tx/f3b0790add4aa54c5cbcad5c7607040786700e8c83e80405496c2f1cee619cce

I have tried to accelerate the transaction using the viabtc accelerator but It pop up and submission limit exceeded. You please check from your side, it might be work from your IP. https://pool.viabtc.com/tools/txaccelerator/
Pushtx site will easily accelerate your transaction without any worry but fees is ridiculous bro. Check the below link too.

https://pushtx.btc.com/#/

i already tried that it says low fee....

You have to submit a txid to their site within about the first five minutes of the hour to get it accepted. Though your fee is too low for the public version.

[aleksej996]

RBF if better than CPFP IMO.
In rbf, a separate transaction is produce with the same inputs and outputs, just with a higher fee. So it'll get confirmed faster and the other transaction merely gets rejected (ensure it is the same script you're spending from).

I agree, but you need to set it beforehand, in which case, you might as well just set the appropriate fee. The CPFP is just a fix for people's mistakes.
RBF would be perhaps dangerous to set as a default, as the lack of it allows to have a certain trust in unconfirmed transactions, since some double spends get rejected by nodes.

[mocacinno]

@jackg and @aleksej996,

you're both right, but i already gave the OP a link to my site explaining both RBF and CPFP (it even has a wizard to create a raw, unsigned CPFP tx, and a tx doublespending the inputs of the unconfirmed tx). The OP indicated he found this way to complex to follow, so this does not seem to be an option for the OP.


@OP:
I just accelerated your transaction, however, this only means it now has a higher priority in the antpool's mempool. It will still have to wait untill all other higher priority transactions were included into the blockchain. Because of the 2 sat/byte fee, you can expect your transaction to be the lowest priority transaction of the high priority transactions, so it can still take hours/days before it gets confirmed.
Next time you have to use a decent fee!

[mocacinno]

@jackg and @aleksej996,

you're both right, but i already gave the OP a link to my site explaining both RBF and CPFP (it even has a wizard to create a raw, unsigned CPFP tx, and a tx doublespending the inputs of the unconfirmed tx). The OP indicated he found this way to complex to follow, so this does not seem to be an option for the OP.


@OP:
I just accelerated your transaction, however, this only means it now has a higher priority in the antpool's mempool. It will still have to wait untill all other higher priority transactions were included into the blockchain. Because of the 2 sat/byte fee, you can expect your transaction to be the lowest priority transaction of the high priority transactions, so it can still take hours/days before it gets confirmed.
Next time you have to use a decent fee!

ok thanks

Your transaction has been included by antpool... It has 9 confirmations now.
Maybe it would be best to lock the topic now, otherwise you'll probably get 10 other guys stating it has been confirmed... It clogs up the forum.