[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000305] ps7-ttc #0 at df804000, irq=43
[ 0.000613] Console: colour dummy device 80x30
[ 0.000643] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040204] pid_max: default: 32768 minimum: 301
[ 0.040423] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040443] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042592] CPU: Testing write buffer coherency: ok
[ 0.042921] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042981] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043201] L310 cache controller enabled
[ 0.043220] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121030] CPU1: Booted secondary processor
[ 0.210226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210359] Brought up 2 CPUs
[ 0.210377] SMP: Total of 2 processors activated.
[ 0.210386] CPU: All CPU(s) started in SVC mode.
[ 0.211048] devtmpfs: initialized
[ 0.213468] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214680] regulator-dummy: no parameters
[ 0.221902] NET: Registered protocol family 16
[ 0.224094] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226388] cpuidle: using governor ladder
[ 0.226400] cpuidle: using governor menu
[ 0.233768] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235283] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235297] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235408] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257253] bio: create slab <bio-0> at 0
[ 0.258659] vgaarb: loaded
[ 0.259383] SCSI subsystem initialized
[ 0.260606] usbcore: registered new interface driver usbfs
[ 0.260807] usbcore: registered new interface driver hub
[ 0.261038] usbcore: registered new device driver usb
[ 0.262113] media: Linux media interface: v0.10
[ 0.262272] Linux video capture interface: v2.00
[ 0.262511] pps_core: LinuxPPS API ver. 1 registered
[ 0.262523] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.262647] PTP clock support registered
[ 0.263006] EDAC MC: Ver: 3.0.0
[ 0.264048] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266866] DMA-API: preallocated 4096 debug entries
[ 0.266879] DMA-API: debugging enabled by kernel config
[ 0.266953] Switched to clocksource arm_global_timer
[ 0.286913] NET: Registered protocol family 2
[ 0.287633] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287690] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287775] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287820] TCP: reno registered
[ 0.287838] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287869] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288101] NET: Registered protocol family 1
[ 0.288447] RPC: Registered named UNIX socket transport module.
[ 0.288459] RPC: Registered udp transport module.
[ 0.288467] RPC: Registered tcp transport module.
[ 0.288476] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288489] PCI: CLS 0 bytes, default 64
[ 0.288921] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290963] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293058] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293259] msgmni has been set to 967
[ 0.294038] io scheduler noop registered
[ 0.294051] io scheduler deadline registered
[ 0.294088] io scheduler cfq registered (default)
[ 0.308089] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308109] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.432560] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.001024] console [ttyPS0] enabled
[ 1.005320] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.012960] [drm] Initialized drm 1.1.0 20060810
[ 1.030037] brd: module loaded
[ 1.039413] loop: module loaded
[ 1.049133] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.054883] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.062992] libphy: XEMACPS mii bus: probed
[ 1.067553] ------------- phy_id = 0x3625e62
[ 1.072295] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.080911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.087579] ehci-pci: EHCI PCI platform driver
[ 1.094785] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.101608] usbcore: registered new interface driver usb-storage
[ 1.108473] mousedev: PS/2 mouse device common for all mice
[ 1.114555] i2c /dev entries driver
[ 1.121457] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.126935] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.132849] Xilinx Zynq CpuIdle Driver started
[ 1.137750] sdhci: Secure Digital Host Controller Interface driver
[ 1.143844] sdhci: Copyright(c) Pierre Ossman
[ 1.148262] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.154985] mmc0: no vqmmc regulator found
[ 1.159025] mmc0: no vmmc regulator found
[ 1.196970] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205649] usbcore: registered new interface driver usbhid
[ 1.211160] usbhid: USB HID core driver
[ 1.215861] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222160] nand: Micron MT29F2G08ABAEAWP
[ 1.226125] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232061] Bad block table found at page 131008, version 0x01
[ 1.238285] Bad block table found at page 130944, version 0x01
[ 1.244338] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250116] Creating 3 MTD partitions on "pl353-nand":
[ 1.255207] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263278] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270615] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279593] TCP: cubic registered
[ 1.282832] NET: Registered protocol family 17
[ 1.287544] Registering SWP/SWPB emulation handler
[ 1.293420] regulator-dummy: disabling
[ 1.297753] UBI: attaching mtd1 to ubi0
[ 1.671186] UBI: scanning is finished
[ 1.683039] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.690123] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.696866] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.703570] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.710428] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.716397] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.723528] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1411313766
[ 1.732558] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.741776] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.741782] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.745708] ALSA device list:
[ 1.745711] No soundcards found.
[ 1.762619] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.877608] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.883538] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.892669] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.902553] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.907592] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E7000DF8-CAC1-4941-A278-188D954B7F71, small LPT model
[ 1.939027] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 1.965090] devtmpfs: mounted
[ 1.968222] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 3.160509] random: dd urandom read with 0 bits of entropy available
[ 3.787004]
[ 3.787004] bcm54xx_config_init
[ 4.396994]
[ 4.396994] bcm54xx_config_init
[ 7.397829] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.403919] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 23.320001] In axi fpga driver!
[ 23.323072] request_mem_region OK!
[ 23.326463] AXI fpga dev virtual address is 0xdf9fc000
[ 23.331597] *base_vir_addr = 0x8c510
[ 23.346837] In fpga mem driver!
[ 23.350036] request_mem_region OK!
[ 23.353543] fpga mem virtual address is 0xe2000000
[ 24.126974]
[ 24.126974] bcm54xx_config_init
[ 24.756970]
[ 24.756970] bcm54xx_config_init
[ 27.757815] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 27.763838] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8164b44966008854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[17] has core num=5
Chain[5] ASIC[43] has core num=1
Chain[5] ASIC[47] has core num=15
Chain[5] ASIC[59] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[14] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1490 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1786 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21332 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Tue Aug 15 11:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8164b44966008854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[5] speed=4320
get fan[2] speed=5880
get fan[5] speed=4320
get fan[2] speed=5880
get fan[5] speed=4320
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=74 value=900
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[17] has core num=5
Chain[J6] ASIC[43] has core num=1
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[59] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[14] has core num=1
Chain[J8] has core num in PIC
miner total rate=14225GH/s fixed rate=14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=668
Asic[ 0]:668
Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668 Asic[ 8]:668
Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668 Asic[16]:668
Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668 Asic[24]:668
Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668 Asic[32]:668
Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668 Asic[40]:668
Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668 Asic[48]:668
Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668 Asic[56]:668
Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
Chain:5 max freq=668
Chain:5 min freq=668
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=668
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668 Asic[ 8]:668
Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668 Asic[16]:668
Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668 Asic[24]:668
Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668 Asic[32]:668
Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668 Asic[40]:668
Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Detect a bad chip=47 on chain[5], fixed to 400M
Asic[47]:668 Asic[48]:668
Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668 Asic[56]:668
Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
Chain:5 max freq=668
Chain:5 min freq=662
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=656
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=656
max freq = 668
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:33 remote:36 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:29 remote:33 offset:26
Chain[J7] chip[244] get middle temp offset=26 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:28 remote:33 offset:25
Chain[J8] chip[244] get middle temp offset=25 typeID=55
single board rate=4713 voltage limit=870 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 870
single board rate=4713 voltage limit=870 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 870
single board rate=4714 voltage limit=870 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 870
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=0
Chain[5] Chip[62] middle Temp=48
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=26
read failed, old value: Chain[6] Chip[62] local Temp=0
Chain[6] Chip[62] middle Temp=44
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=25
read failed, old value: Chain[7] Chip[62] local Temp=0
Chain[7] Chip[62] middle Temp=43
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
