craftcoin23 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 08:38:50 PM |
|
Hi guys, set up my first rig yesterday with 6 RX580's and an ASUS motherboard but I can not get it start. When I turn in on the gpus fan are going, same with the cpu, motherboard is all lit up but when I plug my monitor into the motherboard nothing, I have a bootable windows usb in which I know works and I can't even get into the bios. Any helps would be greatly appreciated.
|
|
|
|
kainplan
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 08:44:15 PM |
|
Hey,
- correct RAM? Lost hours with my last rig because I bought registered DDR3 which is not supported by most boards.
- have you tried the monitor out of your GPU? The one in the full sized PCIe Slot.
- tried booting without/with one GPU only?
|
|
|
|
BTC22
Newbie
Offline
Activity: 322
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 08:44:28 PM |
|
What CPU and RAM?
|
|
|
|
2stout
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 08:47:58 PM |
|
Try plugging your monitor into one of the GPUs- try the first one and if that doesn't work try the other GPUs. Also, not sure if you are using VGA, DVI, or HDMI cable but would recommend using HDMI first, if possible, since it plugs in and unplugs quicker and it's possible HDMI could be the default display output for the GPUs.
|
|
|
|
Ascredo
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 224
Merit: 15
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 08:57:27 PM |
|
For a start, try to run with one graphics card, there might be a problem with the motherboard.. It makes sounds when you turn?
|
|
|
|
craftcoin23 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 09:23:37 PM |
|
What CPU and RAM?
Intel Core i3 and G-Skill Ripjaws DDR4
|
|
|
|
ferall
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 09:37:46 PM |
|
What CPU and RAM?
Intel Core i3 and G-Skill Ripjaws DDR4 Have you tried all the above?
|
|
|
|
craftcoin23 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 09:47:57 PM |
|
What CPU and RAM?
Intel Core i3 and G-Skill Ripjaws DDR4 Have you tried all the above? I have not the rig is in my office and I was not there today so I am going to try all of this first thing in the morning
|
|
|
|
crackedhead
Newbie
Offline
Activity: 4
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 09:56:14 PM |
|
Hi guys, set up my first rig yesterday with 6 RX580's and an ASUS motherboard but I can not get it start. When I turn in on the gpus fan are going, same with the cpu, motherboard is all lit up but when I plug my monitor into the motherboard nothing, I have a bootable windows usb in which I know works and I can't even get into the bios. Any helps would be greatly appreciated.
My troubleshooting steps would probably be: - Read the motherboard manual to identify any diagnostic features (error led's, etc.)
- Pull out all risers & graphics cards, plug in one graphics card into the full size (16x) slot
- Connect monitor to this graphics card
- Power on, you should atleast see the BIOS screen now. If no - then you missed connecting something or have a bad component somewhere.
- Is your CPU fan spinning ? Is the CPU power connected?
- Is the graphics card power connected? Does the card need one 6 / 8 pin or both 6 + 8 pin to be powered
|
|
|
|
Preach
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 10:00:04 PM |
|
Make sure all power connections are connected and memory is in in the proper slot. As other members have stated, try one gpu first.
When/if it boots, start by updating the BIOS. You haven't stated which main board but go over the settings and make sure you have the proper ones selected.
If it keeps just spinning fans, there is probably a component issue.
Wil
|
|
|
|
treanski
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 10:01:07 PM |
|
Hi guys, set up my first rig yesterday with 6 RX580's and an ASUS motherboard but I can not get it start. When I turn in on the gpus fan are going, same with the cpu, motherboard is all lit up but when I plug my monitor into the motherboard nothing, I have a bootable windows usb in which I know works and I can't even get into the bios. Any helps would be greatly appreciated.
My troubleshooting steps would probably be: - Read the motherboard manual to identify any diagnostic features (error led's, etc.)
- Pull out all risers & graphics cards, plug in one graphics card into the full size (16x) slot
- Connect monitor to this graphics card
- Power on, you should atleast see the BIOS screen now. If no - then you missed connecting something or have a bad component somewhere.
- Is your CPU fan spinning ? Is the CPU power connected?
- Is the graphics card power connected? Does the card need one 6 / 8 pin or both 6 + 8 pin to be powered
skip that shit its the ram
|
|
|
|
Alantre
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 10:02:16 PM |
|
Sounds related to display output. Maybe ram but unplugging all gpus will help diagnose this. as guys above mentioned. As they suggested by going down to one/no gpu. Just set the bios to IGPU only and you can use the on board gpu. For AMD i find there is also an option called render standby that has helped me before
|
|
|
|
craftcoin23 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 10:15:50 PM |
|
Hi guys, set up my first rig yesterday with 6 RX580's and an ASUS motherboard but I can not get it start. When I turn in on the gpus fan are going, same with the cpu, motherboard is all lit up but when I plug my monitor into the motherboard nothing, I have a bootable windows usb in which I know works and I can't even get into the bios. Any helps would be greatly appreciated.
My troubleshooting steps would probably be: - Read the motherboard manual to identify any diagnostic features (error led's, etc.)
- Pull out all risers & graphics cards, plug in one graphics card into the full size (16x) slot
- Connect monitor to this graphics card
- Power on, you should atleast see the BIOS screen now. If no - then you missed connecting something or have a bad component somewhere.
- Is your CPU fan spinning ? Is the CPU power connected?
- Is the graphics card power connected? Does the card need one 6 / 8 pin or both 6 + 8 pin to be powered
Is there one specific spot on the PSU that the CPU powercable needs to go into? Or any 8pin slot?
|
|
|
|
Set Ready Go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 273
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 10:25:24 PM |
|
Hi guys, set up my first rig yesterday with 6 RX580's and an ASUS motherboard but I can not get it start. When I turn in on the gpus fan are going, same with the cpu, motherboard is all lit up but when I plug my monitor into the motherboard nothing, I have a bootable windows usb in which I know works and I can't even get into the bios. Any helps would be greatly appreciated.
My troubleshooting steps would probably be: - Read the motherboard manual to identify any diagnostic features (error led's, etc.)
- Pull out all risers & graphics cards, plug in one graphics card into the full size (16x) slot
- Connect monitor to this graphics card
- Power on, you should atleast see the BIOS screen now. If no - then you missed connecting something or have a bad component somewhere.
- Is your CPU fan spinning ? Is the CPU power connected?
- Is the graphics card power connected? Does the card need one 6 / 8 pin or both 6 + 8 pin to be powered
Is there one specific spot on the PSU that the CPU powercable needs to go into? Or any 8pin slot? It depends on what PSU that you have. for example: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fcdn.pcpartpicker.com%2Fstatic%2Fforever%2Fimages%2Fproduct%2F0fb6d9b7eeb1a9ed42062175018d6e1c.1600.jpg&t=665&c=s4idxr53MOdWmQ) Here u clearly see which 2 slots for the eps12v Second example: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Finetimg3.se%2Fimg%2F688x386%2F6902342_1.jpg&t=665&c=m6vdhtfLQUnATw) You see that the Pcie cables and the eps12v are the same
|
|
|
|
craftcoin23 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 10:39:47 PM |
|
Hi guys, set up my first rig yesterday with 6 RX580's and an ASUS motherboard but I can not get it start. When I turn in on the gpus fan are going, same with the cpu, motherboard is all lit up but when I plug my monitor into the motherboard nothing, I have a bootable windows usb in which I know works and I can't even get into the bios. Any helps would be greatly appreciated.
My troubleshooting steps would probably be: - Read the motherboard manual to identify any diagnostic features (error led's, etc.)
- Pull out all risers & graphics cards, plug in one graphics card into the full size (16x) slot
- Connect monitor to this graphics card
- Power on, you should atleast see the BIOS screen now. If no - then you missed connecting something or have a bad component somewhere.
- Is your CPU fan spinning ? Is the CPU power connected?
- Is the graphics card power connected? Does the card need one 6 / 8 pin or both 6 + 8 pin to be powered
Is there one specific spot on the PSU that the CPU powercable needs to go into? Or any 8pin slot? It depends on what PSU that you have. for example: https://cdn.pcpartpicker.com/static/forever/images/product/0fb6d9b7eeb1a9ed42062175018d6e1c.1600.jpgHere u clearly see which 2 slots for the eps12v Second example: https://inetimg3.se/img/688x386/6902342_1.jpgYou see that the Pcie cables and the eps12v are the same http://www.corsair.com/~/media/corsair/product%20photos/psu/rm-series/rm1000/large/rm1000_dc_side.pngThis is my psu, i just put it into one of those 8 pins
|
|
|
|
Set Ready Go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 273
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 10:59:30 PM |
|
Then you are golden!
|
|
|
|
craftcoin23 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 11:01:05 PM |
|
Then you are golden!
is there a specific spot for the ram? i just put it into a random one
|
|
|
|
Set Ready Go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 273
Merit: 17
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2018, 11:07:04 PM |
|
Then you are golden!
is there a specific spot for the ram? i just put it into a random one A2 or B2 probably, if you got 2 sticks then but check your manual for the ram.
|
|
|
|
BTC22
Newbie
Offline
Activity: 322
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2018, 12:53:33 AM |
|
What CPU and RAM?
Intel Core i3 and G-Skill Ripjaws DDR4 Is your RAM compatible with the motherboard and cpu?
|
|
|
|
craftcoin23 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 01, 2018, 03:20:09 PM |
|
What CPU and RAM?
Intel Core i3 and G-Skill Ripjaws DDR4 Is your RAM compatible with the motherboard and cpu? How can I check?
|
|
|
|
|