there is no screen to be attached matching miner

[Fith]

Does anybody have Gigabyte GA 270 Gaming K3 working with SMOS? Have now tried updating BIOS and tried to find acceptable settings but so far still getting the error prompt..

[Honowski]

To All:


Regarding: There is no screen to be attached matching miner



Solution/best practice: Patience




After a couple minutes, smOS continues booting and updating itself and it should work just fine. It just takes some time.

I'm running 6x1070 ti on an ASrock Hb110

[kg10021]

Hey,

Thank you for the post. I am unable to get my rig to be recognized by Simplemining website. Do you have any suggestions?

I have waited over half an hour and keep getting the "There is no screen attached matching miner"

It sounds like you've dealt with this. Do you have any suggestions for me?

Anything you can suggest is HIGHLY HIGHLY APPRECIATED

[TrynaFindaWay]

Anyone have any luck with this issue?

I'm building my first rig and could definitely use some help

MOBO: Gigabyte z270p-d3 currently on BIoS version F6
GPU: 6x GTX 1070 ti
Intel g4400 CPU
EVGA GQ 1000w PSU
Simple miner OS on a flash drive
Ethernet plugged into MOBO
Configured Bios settings per Simple miner website (I couldn't find the 4G Decoding to enable but all other settings are correct)

I'm able to boot ubuntu but keep getting this same error message: "There is no screen to be attached matching miner."

I tried:
- attaching just one GPU directly into the MOBO but still get the same issue.
- switching risers and various components/wires but no luck.
- tried an identical but different GPU - still no luck.

Any suggestions would be much appreciated! Thank you!!

Hey, I too am having the same problem..

I have

MOBO: Gigabyte z270p-d3 (not sure bios version, but i just got it a week ago so I'm sure I'm up to the latest version)
GPU: 2x GTX 1050 TIs (currently one connected) and 1 GTX 960 (disconnected)
Intel G3900 CPU
EVGA GQ 850w PSU
Simple miner OS on a 16GB flash drive (it's a usb 2.0 flash drive connected to a usb 3.0 or 3.1 port)
Ethernet plugged into MOBO

I left my Rig running for 30 minutes and I still kept getting "There is no screen to be attached matching miner." I wonder if I attached my single GTX 1050TI gpu correctly?

[vorpalspear]

BTW, I'm having this issue, stuck on a seemingly endless loop, and and am sure it is not "risers" because I'm not using risers on this machine, and everything works fine in windows. I haven't tried modifying the BIOS yet, but was able to hit control-c which gave me a command prompt. Which may come in useful.

EDIT: Apparently the solution for me was "patience" because it did a "shutdown now" and it rebooted and actually started working this time.

[ravasaf]

Simply connect your GPU 1st to the PCIE (not the PCI) and verify that the riser is correctly connected to the MOBO

[mineoneone]

Best place to get SMOS support is on the official chat: http://chat.simplemining.net/channel/general