Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed

[shortpocket]

sudo su didnt help

[loshia]

sudo su didnt help

Sorry dude......finally if you can enable ssh and give me remote access i can try to help you

[shortpocket]

maybe some other time....

[loshia]

maybe some other time....

Good luck dude

[Zich]

cgminer version 4.2.2 - Started: [2014-04-10 09:52:26]
--------------------------------------------------------------------------------
 (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
 A:0  R:0  HW:0  WU:0.0/m
 Connected to "pool" diff 8 with stratum as user "user"
 Block: 9ffe96f9...  Diff:73.4K  Started: [09:52:35]  Best share: 0
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
 [2014-04-10 09:52:24] Started cgminer 4.2.2
 [2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
 [2014-04-10 09:52:25] No devices detected!
 [2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
 [2014-04-10 09:52:25] Probing for an alive pool
 [2014-04-10 09:52:26] Pool 0 difficulty changed to 8
 [2014-04-10 09:52:26] Network diff set to 73.5K
 [2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
 [2014-04-10 09:52:35] Network diff set to 73.4K
 [2014-04-10 09:52:35] Stratum from pool 0 detected new block

As HellDiverUK said, there is other cgminer run in your host, maybe you just not know how to see it.
I test this already & the message is same.
Check your pool, your worker must be submitting share this whole time LOL.

[shortpocket]

No submissions

[Zich]

No submissions

Type " top " & post the screen shot.

[shortpocket]

sudo su didnt help

Sorry dude......finally if you can enable ssh and give me remote access i can try to help you

i have run in to a new problem. the miner is visible and if i pull out the usb a message appears on the screen wich is good news.
 i will send you a pm pretty soon so you can ssh it if you feel like it..

[2GOOD]

Hi,
Since the board gets really hot in the summer I decided to change the fans - the original ones were:
Evercool EC9225M12SA
Dimensions: 92x92x25 mm
Power: 1.8 W
Speed: 2200 rpm
Air Flow: 40.9 CFM
Noise: 25 dB
The information on OP was wrong - sorry about that

I've changed the top fan with:
Evercool EC9225HH12BA
Dimensions: 92x92x25 mm
Power: 3.24 W
Speed: 3000 rpm
Air Flow: 61.51 CFM
Noise: 35 dB

..and the bottom with a spare from HEX16B:
Sunon EE92251S1-0000-A99
Dimensions:    92x92x25 mm
Power: 2.0 W
Speed: 3000 rpm
Air Flow: 51.5 CFM
Noise: 34 dB

How it's running cool at 260/980 => ~130GH

btw I've updated the price chart you can see it here:
Updated Price Chart[/i]