For a start - turn off
bold and learn to use the Insert Code function, the icon looks like
#so those text walls become:
Mem: 82164K used, 428388K free, 0K shrd, 2208K buff, 41996K cached
CPU: 11% usr 11% sys 0% nic 77% idle 0% io 0% irq 0% sirq
Load average: 1.65 1.55 1.15 1/79 2858
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
381 380 root R < 167m 34% 15% /usr/bin/cgminer --bitmain-dev /dev/bitmain-asic --bitmain-options 115200:32:8:7:200:0782:0725 --bitmain-checkn2diff --bitmain-hwerror --version-file /usr/bin/compile_time --queue 8192 --api-listen --default-config /config/cgminer.conf
2857 2856 root R 2148 0% 7% top -b -n 1
384 1 root S 5980 1% 0% /usr/bin/monitor-recobtn /usr/bin/factory_config_reset.sh
345 1 root S 3324 1% 0% /usr/bin/ntpd -p /var/run/ntp.pid -g
356 1 root S 2980 1% 0% /usr/sbin/lighttpd -f /etc/lighttpd.conf
380 1 root S 2616 1% 0% {screen} SCREEN -S cgminer -t cgminer -m -d /usr/bin/cgminer --bitmain-dev /dev/bitmain-asic --bitmain-options 115200:32:8:7:200:0782:0725 --bitmain-checkn2diff --bitmain-hwerror --version-file /usr/bin/compile_time --queue 8192 --api-listen --default-config /config/cgminer.conf
342 1 root S 2276 0% 0% /usr/sbin/dropbear -r /config/dropbear_rsa_host_key -p 22
408 1 root S 2148 0% 0% {minerlcd} /bin/sh /sbin/minerlcd
328 1 root S 2148 0% 0% {exe} ash /etc/wd_network.sh
407 1 root S 2148 0% 0% {monitorcg} /bin/sh /sbin/monitorcg
324 1 root S 2148 0% 0% udhcpc -b -t 10 -A 10 -x hostname antMiner -i eth0
2856 356 root S 2148 0% 0% /bin/sh /www/pages/cgi-bin/monitor.cgi
2858 2856 root S 2148 0% 0% /bin/sh /www/pages/cgi-bin/monitor.cgi
2795 407 root S 2016 0% 0% sleep 5m
2842 328 root S 2016 0% 0% sleep 60
2855 408 root S 2016 0% 0% sleep 10s
405 1 root S 1908 0% 0% /sbin/getty 115200 ttyO0
406 1 root S 1908 0% 0% /sbin/getty 38400 tty1
387 1 root S 1692 0% 0% /usr/sbin/watchdog -c /config/watchdog.conf
1 0 root S 1652 0% 0% init [5]
395 1 root S 1632 0% 0% /usr/bin/test-btn /usr/bin/test.sh
21 2 root SW 0 0% 0% [kworker/u:1]
10 2 root SW 0 0% 0% [rcu_sched]
15 2 root SW 0 0% 0% [kworker/0:1]
425 2 root DW 0 0% 0% [lcd_test]
11 2 root SW 0 0% 0% [watchdog/0]
75 2 root SW 0 0% 0% [mmcqd/0]
108 2 root SW< 0 0% 0% [kworker/0:1H]
3 2 root SW 0 0% 0% [ksoftirqd/0]
2 0 root SW 0 0% 0% [kthreadd]
4 2 root SW 0 0% 0% [kworker/0:0]
5 2 root SW< 0 0% 0% [kworker/0:0H]
7 2 root SW< 0 0% 0% [kworker/u:0H]
8 2 root SW 0 0% 0% [migration/0]
9 2 root SW 0 0% 0% [rcu_bh]
12 2 root SW< 0 0% 0% [khelper]
13 2 root SW 0 0% 0% [kdevtmpfs]
14 2 root SW< 0 0% 0% [netns]
16 2 root SW 0 0% 0% [bdi-default]
17 2 root SW< 0 0% 0% [kintegrityd]
18 2 root SW< 0 0% 0% [kblockd]
19 2 root SW 0 0% 0% [khubd]
20 2 root SW 0 0% 0% [irq/86-44e0b000]
24 2 root SW 0 0% 0% [irq/23-tps65217]
27 2 root SW 0 0% 0% [irq/46-4819c000]
36 2 root SW< 0 0% 0% [rpciod]
38 2 root SW 0 0% 0% [khungtaskd]
39 2 root SW 0 0% 0% [kswapd0]
40 2 root SW 0 0% 0% [fsnotify_mark]
41 2 root SW< 0 0% 0% [nfsiod]
42 2 root SW< 0 0% 0% [crypto]
45 2 root SW< 0 0% 0% [pencrypt]
46 2 root SW< 0 0% 0% [pdecrypt]
53 2 root SW< 0 0% 0% [OMAP UART0]
54 2 root SW 0 0% 0% [spi1]
57 2 root SW 0 0% 0% [spi2]
60 2 root SW< 0 0% 0% [kpsmoused]
61 2 root SW 0 0% 0% [irq/150-mmc0]
73 2 root SW< 0 0% 0% [deferwq]
74 2 root SW 0 0% 0% [kworker/u:2]
109 2 root SW 0 0% 0% [jbd2/mmcblk0p3-]
110 2 root SW< 0 0% 0% [ext4-dio-unwrit]
396 2 root SW< 0 0% 0% [bitmain-asic]
Aside from that, make sure all fans are running and check the PSU to make sure it is putting out 12-12.3vdc.